Archive:WHC Mapper

Registration and Logging In

Location is: https://euni.evewspace.com/. Registration Code is in the WHC.E-uni welcome mail.

To register, simply click the "Register" button and fill the fields. Your name should be exactly the same as your in-game name, otherwise you'll keep getting booted from the mapper.

What does it all mean?

Adding a System

1. Click on the system it's added to
2. Click "Add System"
3. Enter the details of the system/WH:

• System: J-Number or system name for k-space systems (this field fills in automatically with the name of they system you're currently in but you can edit it if needed)
• Friendly Name: The short name we use (WHC Mapping Scheme)
• Time Status: End of life means less than 4 hours ("reaching the end of its natural lifetime")
• Mass Status: Normal (not yet significantly disrupted), Fist shrink (stability reduced), critical (verge of collapse)
• Type: WH id (eg K162) in the pre-existing system
• Type: WH id in the new system
• Bubbled: Check one/both of these if the hole is bubbled on one/both sides

(Note that one of the type fields will always be K162)

Signatures

image 1 - Signature edit

To add a new signature: - see image 1 on right

• Click on the "Signatures" tab
• Fill in the "ID", "Type" and "Info" fields and click "Add Sig"

To edit an existing signature:

• Click the pencil icon in the "Actions" column and edit the "ID", "Type" or "Info" fields and click "Save Sig"

To delete an existing signature:

• Click the delete icon (circle with a slash through it) in the "Actions" column

To delete all signatures from a system:

• Click the "Purge Signatures" button (you will get a chance to confirm your action)

Mass Adding Signatures

• In your Probe Scanner window, make sure that Cosmic Signatures are selected in the drop down and "Show Anomalies" is not ticked
• All that should be showing now are Cosmic Signatures
• Click inside the list of signatures and copy them all (Ctrl A then Ctrl C)
• Click the "Bulk Import" button and paste (Ctrl V) the signatures into the window and click the "Import Sigs" button

Adding or editing system details

image 1 - System details 1

File:System details 2.png

image 2 - System details 2

To add or edit system details: - see image 1 on right

• Go to the "Details" tab and click the pencil icon next to "System Details"
• Fill in or edit the necessary fields:
  • Friendly Name: use this to edit the friendly name of the system if the wrong one was entered by mistake
  • Info: add any pertinent information about the w-space system such as:
    • Piloted/unpiloted ships in POSes
    • Location of bubbles, especially "dirty" ones around POSes
    • Anything else that is unique to this system and isn't otherwise easily known
    • Number of Combat and Ore Anomalies (if in Bacon or other C3 system close to home)
  • Use the "Occupied" field to enter the name(s) of any corps/alliances that occupy (have POSes) in the system
  • At the bottom of the window (you may have to scroll down) select the system "type":
    • Dangerous System: select this if the system has active and aggressive pilots who are ready to fight
    • Important System: select this if the system has something of high value such as Instrumental/Vital Gas sites for example
    • Otherwise, leave it at default (Regular System)

Adding new POS intel to the mapper

image 1 - Add a new POS

image 2 - POS details

Auto mode

• The easiest way to add a new POS is in "Auto" mode. To do this, you need to be on grid with the POS
• Fill in the POS details

1. Make sure that you are in the right system in the mapper and click the plus button in the "Starbases" tab - see image 1 on right
2. See image 2 on right for the following steps
3. The Auto/Manual selection should be on "Auto" by default - leave it at that
4. Fill in the "Full Corp Name":
   1. Show info on the control tower, then click on the corp icon to show info on the corp that owns it
   2. Drag the corp icon from the show info window into any chat window input box (this will place the corp name into the box) and simply copy/paste that corp name into the "Full Corp Name" field (you can then delete it from the input box)
   3. You can also just type in the corp name yourself but using the two steps above can be easier (for some people) and more accurate
5. Select the "Status" - we usually only add "Online" POSes but there is no rule against adding in-active (anchored) POSes
6. In the "Fitting" window, paste a 360 degree d-scan (irrelevant range - as long it covers the POS and nearby moon) with "Active Overview Settings" un-ticked
7. Click the blue "Add POS" button and you're done

Manual mode

• Sometimes you may get an error trying to add a POS in Auto mode, at which point you can add it manually. If this happens, it would be helpful if you file a bug report. Please include all the details you entered.
• Fill in the POS details

1. Click the "Manual" button
2. Fill in the "Full Corp Name" as above
3. Also fill in the other info - not shown in the image - (Planet, Moon, Tower Name, Tower Type)
4. Select the "Status" as above
5. Fill in the "Fitting" as above but make sure you also tick the "Parse as D-Scan Paste" checkbox at the bottom (not shown in the image)
6. Click the blue "Add POS" button and you're done

Editing a Connection

1. Click on the WH id (eg K162; doesn't matter which direction)
2. Change time/shrink etc.
3. Click save

System destinations

When you click on a k-space connection on the mapper:

1. You will see the system details
2. Under the details, you will notice seeing popular trade hubs along with E-Uni HQ.

image 1 - System destination example

Clicking on the "D" button will set destination while clicking on the "W" will set a waypoint. Which is super handy if you went on a roam and want to make it back to a certain connection.

You can add personal k-space destinations by:

1. Bringing up the mapper
2. Clicking on "Settings" tab
3. Click on "Map settings"
4. After all the global mapper destinations you will see that you can add a k-space system for personal uses.

image 1 - Click on Settings

image 2 - Click on map settings

image 3 - Add system

This will allow you to set custom personal destinations that will tell you how many jumps it will take from the current k-space connection you have clicked on. Don't worry about revealing your super secret system as only you will be able to see it. Setting global destinations requires admin rights.