Difference between revisions of "Mumble"

Latest revision as of 21:31, 13 August 2024

This page is specific to EVE University. Other corporations or groups in the game may operate differently.
For a summary of EVE University's rules and code of conduct, see EVE University Rules.

Mumble is a third-party VOIP (Voice Over Internet Protocol) application that allows people to communicate verbally both in- and out-of-game.

Our Mumble authentication for Members and Guests is handled through Alliance Auth.

Accessing Mumble

Navigate to https://auth.eveuniversity.org/ and sign in using EVE Online SSO - For access to base systems you will only be asked for public scopes:

Select Services from the toolbar on the left hand side of the screen
Select the amber tick at the end of the mumble row and you will see your username and password
Select continue
Click on the Green arrow Connect button to automatically connect to Mumble
Enter your Mumble password if prompted

After you've successfully connected, you can easily save the server settings in your Mumble Desktop client to reconnect easily in the future.

Using the Mumble Desktop Client:

Click on Server > Connect > Add New
Click on the Fill button to automatically fill in the server details
You can modify the Label to anything you like, or just leave it as the default

If you are still having problems getting connected, try following the manual instructions below setup the connection.

Manual connection instructions

After setting up your Mumble account through Alliance Auth in the steps above. You can try using these steps to setup a connection to the EVE University Mumble server if the Green Connect button isn't working for you.

Using the Mumble Desktop Client:

Click on Server > Connect > Add New
Enter the EVE University Mumble details below then click OK
Select EVE University Mumble in the list then click Connect

EVE University Mumble
Address	mumble.eveuniversity.org
Port	64738 (default)
Username	<Your Alliance Auth username, i.e: Example_Member>
Password (only when prompted)	<Your Mumble password>
Label	EVE University Mumble

Your Alliance Auth username is normally your character name with spaces replaced by underscores. (i.e. Example Member is Example_Member) If you're uncertain, you can see your current username for Mumble on the Alliance Auth Services page.

If you cannot remember your Mumble password, go back to the Services page where you can set a new password using the amber pencil icon or create a new random password using the gray refresh, or circular arrows, icon.

If you're still unable to connect to our Mumble server after trying these steps, feel free to reach out for support in #alliance-auth channel on the EVE University Discord.

Initial configuration

Push to talk

There is nothing more annoying than hearing other people type or breathe into their microphone constantly. If you leave push-to-talk off during a fleet op then you are likely to have some very frustrated Corp mates. This is why push to talk is mandatory. To turn on push to talk for Mumble, follow these steps.

Open up Mumble
Click the “Configure” option at the top, then click settings
You should now be in the Audio Input settings area, under the Transmission area make sure the Transmit drop down box is set to “Push to Talk”
Now you need to assign a key that you will need to press so others can hear you. To do this click the “Shortcuts” button on the left hand side of the Settings dialog box.
There should be a listing there labeled “Push-to-Talk”, click on the Shortcut column and press the key that you wish to be your push to talk key.

Whisper key

Some of our mumble rooms, most notably the fleet and general lounge channels are linked to other channels. The purpose of these sub channels is to give the group within the option to talk to each other without all of the linked channels being able to hear it.

For example the commander of the logistics group can now talk to only the Logistic pilots without confusing everyone else.

A whisper key allows you to talk to just your current channel instead of broadcasting your voice to all of the linked channels.

You should already see your existing push-to-talk key set up. It's a good idea to check the Suppress box on any shortcuts, as that will prevent other applications from recognizing your key and performing unforeseen tasks you had not expected (e.g. warp scrambling stargates).

Setting up your whisper key

Click the Add button in the bottom left, which will bring up a new Unassigned shortcut in the window.
Click the word Unassigned and select Whisper/Shout from the drop-down list.
Click the word Empty next to it, which should cause a [...] button to appear next to that - click that [...] button to open a new Whisper Target window.
Select the Shout to Channel box, and check that “Current channel” is highlighted, and then click OK.
Finally click the Shortcut column of your new shortcut and press the key you wish to use.

You now have your Whisper chat key setup!

By default you should always use a Whisper Key to chat in EVE University Mumble channels.

Notifications

Go to Configure > Settings... > Messages. From there you can disable popup and sound notifications about events you don't care about. By default Mumble makes a loud PING and gives you a notification popup for almost any event on the server - this gets annoying pretty fast.

Mac version: From the Mumble --> Preferences window (make sure the 'Advanced' checkbox in the upper right is checked), select the 'Messages' tab. The only way to eliminate audio notifications is to uncheck items in the 'Soundfile' column.

Overlay

It can be useful to have the Mumble Overlay set up for fleet operations as it eliminates the need for checking the Mumble client to see who is talking. See the Mumble Overlay for a step-by-step guide.

Chat policies

Please remember that our Communications Policy applies in the Uni Mumble. Moderation can include muting and/or banning. Note that this can severely affect your participation in fleets, classes, and other activities.

Channel rules & access

Mumble is currently set up in the following configuration:

General Lounges - Two channels, one for members and one for the public. A general hangout space for everyone
Classrooms - Open to everyone who joins mumble and used by the Teachers to run classes
Public Fleets - Open to everyone for public roams and fleets (EVE Uni Comms Policy still applies)
Uni Fleets - Restricted to Uni Members for Uni only roams/fleets or QRF’s
Standing Fleets - Be in standing fleet and in here if your just hanging out around our staging areas
Special Interest Groups - Rooms to allow members to connect your content and interests no matter which area of space the operate in
On Demand Channels - Anyone in EVE Uni can create temporary channels here if there is no suitable channel for their needs.
Staff Offices - Restricted to EVE University Officers and Management
AFK & Idle Room - If you're muting your speakers anyways, idle here

Moderation

Any of our officers, managers or directors are able to moderate our mumble server.

Note for MacOS users

When updating or reinstalling Mumble on MacOS, it is necessary to go into System Preferences > Privacy & Security > Privacy

For BOTH the "Accessibility" AND "Input Monitoring" lists: Remove Mumble from the list, then re-add Mumble to the list by clicking-and-dragging the NEW Mumble application from the "Applications" folder to the list.

If installing Mumble for the first time ever (on a given Macintosh), then just add Mumble to these two lists.

Forgetting to do this when installing, reinstalling, or updating Mumble will result in Mumble being unable to detect keyboard inputs for Push-To-Talk and Whisper/Shout features.

Warning

Do NOT upgrade from mumble <=1.3.x to 1.5.x+^[1]. If you accidentally did upgrade, follow these steps to recover:

When referring to delete, that is dragging app, file or folder icon to trash can or using Command-Delete
Delete Mumble app by going to your Applications folder^[2]
Reveal hidden directories by going to Finder, open up your Macintosh HD folder. Press Command+Shift+Dot
Delete mumble database directory: $HOME/Library/Application Support/Mumble/^[3]
Delete mumble settings file: $HOME/Library/Preferences/net.sourceforge.mumble.Mumble.plist^[3]
Remove permissions by going to System Preferences > Privacy & Security > Privacy. For BOTH the "Accessibility" AND "Input Monitoring" lists: Remove Mumble from the list using the minus button.
Install Mumble 1.5.x+ software
Add permissions for new Mumble by going to System Preferences > Privacy & Security > Privacy. For BOTH the "Accessibility" AND "Input Monitoring" lists: Add Mumble from the list using the plus button, and selecting Mumble from Applications.

FYI Mumble download page warns that upgrading directly to 1.5.x+ will break mumble on your macOS machine.

References

[1] ttps://www.mumble.info/downloads/

[2] ttps://www.mumble.com/support/how-to-uninstall-mumble-mac.php

[Mac_location-3] ttps://www.mumble.info/documentation/user/settings-storage-location/

[1]

[2]

[3]

Difference between revisions of "Mumble"

Latest revision as of 21:31, 13 August 2024

Contents

Accessing Mumble

Manual connection instructions

Initial configuration

Push to talk

Whisper key

Setting up your whisper key

Notifications

Overlay

Chat policies

Channel rules & access

Moderation

Note for MacOS users

Warning

References

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

EVE University

UniWiki

Tools

@@ Line 1: / Line 1: @@
-{{Member Services}}
+{{eunispecific}}
+{{tocright}}
-== Why is it useful?  ==
+'''[https://www.mumble.info/ Mumble]''' is a third-party VOIP (Voice Over Internet Protocol) application that allows people to communicate verbally both in- and out-of-game.
-Mumble is mostly used in two situations: PvP and Classes. In PvP it is very useful because, for example, it is faster to call out a primary target than to type it, especially with PvP related lag. In classes it is great as well because we do not want our poor instructors getting Carpal Tunnel Syndrome from typing everything. In effect, it is just a lot easier and faster than typing.
+Our Mumble authentication for Members and Guests is handled through Alliance Auth.
-== Quick guide  ==
+== Accessing Mumble ==
+Navigate to https://auth.eveuniversity.org/ and sign in using EVE Online SSO - For access to base systems you will only be asked for public scopes:
+# Select Services from the toolbar on the left hand side of the screen
+# Select the amber tick at the end of the mumble row and you will see your username and password
+# Select continue
+# Click on the Green arrow ''Connect'' button to automatically connect to Mumble
+# Enter your Mumble password if prompted
-#Download mumble from [http://mumble.sourceforge.net/ http://mumble.sourceforge.net/] (the stable version is running v1.2.2). On Windows, the stable version is recommended because it has a better overlay (ie. font size can be changed) and better hotkey setup. On Mac, the overlay feature does not appear to work on the stable release; try the developer snapshot.
+After you've successfully connected, you can easily save the server settings in your Mumble Desktop client to reconnect easily in the future.
-#Install and [[Mumble#How_to_set_it_up.3F|set it up]] (create your own certificate, etc)
-#Start the client and Server&gt;Connect&gt;Add New...
-#*Servername: Eve University
-#*Address: mumble.eveuniversity.org
-#*Port: 64738 (Default)
-#*Username: &lt;Your Forum Username, i.e: Your character name with nothing either side&gt;
-#Connect (you can ignore the certificate warning - this will be fixed later).
-#When prompted for your password, use your forum password!
-#There is no six!
-#You should automatically be dropped in the "Chat E-UNI" channel.
-#Talk.
-#Restart EVE client if you want overlay to work.
-== Setting up Mumble<br>  ==
+'''Using the Mumble Desktop Client:'''
+# Click on ''Server'' > ''Connect'' > ''Add New''
+# Click on the ''Fill'' button to automatically fill in the server details
+# You can modify the Label to anything you like, or just leave it as the default
-=== Audio Tuning Wizard  ===
+'''If you are still having problems getting connected, try following the [[#Manual Connection Instructions|manual instructions]] below setup the connection.'''
-When you run Mumble the first time, an Audio Tuning Wizard is presented to you. If you skip or miss it on the first run you can retake the wizard by clicking Configure &gt; Audio Wizard. It is recommended you go through it carefully, since setting up Mumble correctly will make your and everyone else's life much easier (going through the Audio Tuning Wizard properly will also normalise everyone's voices, such that everyone will sound the same volume regardless of how they have their microphone set up).&nbsp; However there are two things I would like to highlight:
+=== Manual connection instructions ===
+After setting up your Mumble account through Alliance Auth in the steps above. You can try using these steps to setup a connection to the '''EVE University Mumble''' server if the Green '''Connect''' button isn't working for you.
-==== Push-to-talk  ====
+'''Using the Mumble Desktop Client:'''
+# Click on ''Server'' > ''Connect'' > ''Add New''
+# Enter the '''EVE University Mumble''' details below then click ''OK''
+# Select ''EVE University Mumble'' in the list then click ''Connect''
-[[Image:MumbleWizardPTT.png]]
+{| class="wikitable" style="text-align: center;"
+|- style="background: #222222;"
+! style="width: 120px;" colspan="2" | EVE University Mumble
+|-
+| Address || '''mumble.eveuniversity.org'''
+|-
+| Port || '''64738''' ''(default)''
+|-
+| Username || ''<Your Alliance Auth username, i.e: Example_Member>''
+|-
+| Password (only when prompted) || ''<Your Mumble password>''
+|-
+| Label || EVE University Mumble
+|}
-When you reach a screen that looks like the one above select the top radio button, click on the box on the same line and press the key you you want to use as the push-to-talk key.This is your ''normal'' push-to-talk key; for certain Fleet roles you may need more than one (see the comments in the Fleet channels), but for general E-UNI activity one is sufficient.<br>
+Your Alliance Auth username is normally your character name with spaces replaced by underscores. (i.e. Example Member is Example_Member) If you're uncertain, you can see your current username for Mumble on the Alliance Auth [https://auth.eveuniversity.org/services Services] page.
-==== Text-to-speech  ====
+If you cannot remember your Mumble password, go back to the [https://auth.eveuniversity.org/services Services] page where you can set a new password using the amber pencil icon or create a new random password using the gray refresh, or circular arrows, icon.
-[[Image:MumbleWizardTextToSpeech.png]]
+If you're still unable to connect to our Mumble server after trying these steps, feel free to reach out for support in '''#alliance-auth''' channel on the [[Discord|EVE University Discord]].
-When you reach a screen that looks like the one above I recommend you disable the text to speech notifications.
+== Initial configuration ==
+=== Push to talk ===
+There is nothing more annoying than hearing other people type or breathe into their microphone constantly. If you leave push-to-talk off during a fleet op then you are likely to have some very frustrated Corp mates. This is why push to talk is mandatory. To turn on push to talk for Mumble, follow these steps.
+# Open up Mumble
+# Click the “Configure” option at the top, then click settings
+# You should now be in the Audio Input settings area, under the Transmission area make sure the Transmit drop down box is set to “Push to Talk”
+# Now you need to assign a key that you will need to press so others can hear you. To do this click the “Shortcuts” button on the left hand side of the Settings dialog box.
+# There should be a listing there labeled “Push-to-Talk”, click on the Shortcut column and press the key that you wish to be your push to talk key.
-<br>
+=== Whisper key ===
+Some of our mumble rooms, most notably the fleet and general lounge channels are linked to other channels. The purpose of these sub channels is to give the group within the option to talk to each other without all of the linked channels being able to hear it.
-=== Connecting to the EVE University Server  ===
+For example the commander of the logistics group can now talk to only the Logistic pilots without confusing everyone else.
-Once Mumble is all set up and you have run through the Audio Turning Wizard, you will want to connect to the EVE University server.&nbsp; <br>
+A whisper key allows you to talk to just your current channel instead of broadcasting your voice to all of the linked channels.
-#Go to Server in the toolbar --&gt; Connect.<br>
+You should already see your existing push-to-talk key set up.  It's a good idea to check the Suppress box on any shortcuts, as that will prevent other applications from recognizing your key and performing unforeseen tasks you had not expected (e.g. warp scrambling stargates).
-#Click the Add New... button in the bottom right.<br>
-#Put anything you like in the Label box ("''Eve University''<span style="font-style: italic;">"</span> seems sensible), the Address box needs to be '''mumble.eveuniversity.org''' and the Port needs to be left as default (64738).<br>
-#The Username box needs to be <u>your exact E-UNI forum username</u>, which also happens to be <u>your exact character name</u>.<br>
-#Click the Connect button.<br>
-#n/a<br>
-#The server will reject your connection, and prompt you with a Wrong Password box.&nbsp; You need to use your forum password (i.e. the same password you chose when you registered for our forums) in the box, then click OK.<br>
-#You are now connected to the Mumble server, which will have moved you into the Public Lounge channel.<br><br>
-=== Notifications  ===
+==== Setting up your whisper key ====
+# Click the Add button in the bottom left, which will bring up a new Unassigned shortcut in the window.
+# Click the word Unassigned and select Whisper/Shout from the drop-down list.
+# Click the word Empty next to it, which should cause a [...] button to appear next to that - click that [...] button to open a new Whisper Target window.
+# Select the Shout to Channel box, and check that “Current channel” is highlighted, and then click OK.
+# Finally click the Shortcut column of your new shortcut and press the key you wish to use.
-In the Configure --&gt; Settings screen you can find Advanced settings checkbox in the bottom left corner. With it checked you can access the Messages settings. From there you can disable popup and sound notifications about events you don't care about.
+You now have your Whisper chat key setup!
-=== Other interesting features<br>  ===
+By default you should always use a Whisper Key to chat in EVE University Mumble channels.
-*Mouse-over anyone's name and their ingame portrait will pop up.<br>
+=== Notifications ===
-*Right-click on a channel and select Join Channel to move to that channel (double-click sometimes produces strange behaviour with nested channels).
+Go to Configure > Settings... > Messages. From there you can disable popup and sound notifications about events you don't care about.  By default Mumble makes a loud PING and gives you a notification popup for almost any event on the server - this gets annoying pretty fast.
-*If the name of the channel that you are in is ''italicized'', then your push-to-talk button, in addition to talking to the current channel, will also talk to everybody in every other channel that is also ''italicized''.&nbsp; Italicized names denote linked channels (you can only see this if you are currently in a linke channel).
-*Click the small yellow |c| button on any channel (or any person) to see information about that channel (or person). The |c| will go white once you've read it (and go yellow again if it changes).&nbsp; You can set your own comment by right-clicking on your own name.<br>
-*You will automatically be moved to the AFK &amp; Idle channel if Mumble detects no activity on your computer for at least 4 hours.&nbsp; Everybody is automatically muted in that channel, so you can also move yourself there if you desire peace and quiet.
-== Channel Structure for Ivy League Navy  ==
+Mac version: From the Mumble --> Preferences window (make sure the 'Advanced' checkbox in the upper right is checked), select the 'Messages' tab. The only way to eliminate audio notifications is to uncheck items in the 'Soundfile' column.
-One of the great advantages of Mumble over Teamspeak is the ability for squad members and their SC to talk amongst themselves, without clogging up comms for the rest of the fleet - in the '''Structured''' fleet channel(s). This can be invaluable for bait squads and instructing new members. In order for this to work however, it requires people to be in the right channel and everyone should have their keys set up correctly.&nbsp; For small fleets this can be a bit overly-elaborate, so we also run '''Semi-structured''' fleet channels and completely '''Unstructured''' fleet channels.<br>
+=== Overlay ===
+It can be useful to have the Mumble Overlay set up for fleet operations as it eliminates the need for checking the Mumble client to see who is talking. See the [[Mumble Overlay]] for a step-by-step guide.
-An important note to start off on: if, when you join a channel, the channel name becomes ''italicized'', then your current channel is linked to the other ''italicized'' channels, and your normal PTT&nbsp;button you set up during Mumble installation will talk to everybody in every currently ''italicized'' channel.<br>
+== Chat policies ==
+Please remember that our [[Communications Policy]] applies in the Uni Mumble. Moderation can include muting and/or banning. Note that this can severely affect your participation in fleets, classes, and other activities.
-=== Unstructured fleet channels<br>  ===
+== Channel rules & access ==
+Mumble is currently set up in the following configuration:
+* '''General Lounges''' - Two channels,  one for members and one for the public.  A general hangout space for everyone
+* '''Classrooms''' - Open to everyone who joins mumble and used by the Teachers to run classes
+* '''Public Fleets''' - Open to everyone for public roams and fleets (EVE Uni Comms Policy still applies)
+* '''Uni Fleets''' - Restricted to Uni Members for Uni only roams/fleets or QRF’s
+* '''Standing Fleets''' - Be in standing fleet and in here if your just hanging out around our staging areas
+* '''Special Interest Groups''' - Rooms to allow members to connect your content and interests no matter which area of space the operate in
+* '''On Demand Channels''' - Anyone in EVE Uni can create temporary channels here if there is no suitable channel for their needs.
+* '''Staff Offices''' - Restricted to EVE University Officers and Management
+* '''AFK & Idle Room''' - If you're muting your speakers anyways, idle here
-This one's dead simple - you only need your normal PTT you set up during Mumble installation and it talks to everyone in the channel.&nbsp; Very suitable for small gangs (e.g. one squad).<br>
+== Moderation ==
+Any of our officers, managers or directors are able to moderate our mumble server.
-<br>
+== Note for MacOS users ==
+When updating or reinstalling Mumble on MacOS, it is necessary to go into System Preferences > Privacy & Security > Privacy
-=== Semi-structured fleet channels<br>  ===
+For BOTH the "Accessibility" AND "Input Monitoring" lists: Remove Mumble from the list, then re-add Mumble to the list by clicking-and-dragging the NEW Mumble application from the "Applications" folder to the list.
-Semi-structured fleet channels contain two channels, the main fleet channel named (e.g.) ''Delta Squad'' and a sub-channel name (e.g.) ''Delta Command.''&nbsp; As you probably already realisd, if you are in a command position such as SC, WC or a Scout (or the FC&nbsp;tells you to get into command chat), you should join the Command sub-channel, whilst normal fleet members should join the parent Squad channel.&nbsp; This sort of fleet channel is useful for medium sized fleets (e.g. one or two wings).<br>
+If installing Mumble for the first time ever (on a given Macintosh), then just add Mumble to these two lists.
-The two channels are linked, which means the normal PTT talks to both.&nbsp; Therefore fleet members do not need any special PTT key, your normal PTT you set up during Mumble installation talks to everyone in the fleet (yes, even those in Command).&nbsp; If you are in Command, you will need another PTT key that talks only to the current channel.&nbsp; To set that up, go to Configure -&gt; Settings -&gt; Shortcuts, which will pop up a window that looks like this:<br>
+Forgetting to do this when installing, reinstalling, or updating Mumble will result in Mumble being unable to detect keyboard inputs for Push-To-Talk and Whisper/Shout features.
-[[Image:Mumble3.png]]<br>
+=== Warning ===
+Do <em>NOT</em> upgrade from mumble <=1.3.x to 1.5.x+<ref>https://www.mumble.info/downloads/</ref>. If you accidentally did upgrade, follow these steps to recover:
+# When referring to delete, that is dragging app, file or folder icon to trash can or using Command-Delete
+# Delete Mumble app by going to your Applications folder<ref>https://www.mumble.com/support/how-to-uninstall-mumble-mac.php</ref>
+# Reveal hidden directories by going to Finder, open up your Macintosh HD folder. Press Command+Shift+Dot
+# Delete mumble database directory: <code>$HOME/Library/Application Support/Mumble/</code><ref name="Mac location" />
+# Delete mumble settings file: <code>$HOME/Library/Preferences/net.sourceforge.mumble.Mumble.plist</code><ref name="Mac location" />
+# Remove permissions by going to System Preferences > Privacy & Security > Privacy. For BOTH the "Accessibility" AND "Input Monitoring" lists: Remove Mumble from the list using the minus button.
+# Install Mumble 1.5.x+ software
+# Add permissions for new Mumble by going to System Preferences > Privacy & Security > Privacy. For BOTH the "Accessibility" AND "Input Monitoring" lists: Add Mumble from the list using the plus button, and selecting Mumble from Applications.
-Although on yours, you should see only your current push-to-talk key already set up in the Shortcuts window, as you haven't set up any others yet.&nbsp; It's a good idea to check the ''Suppress'' box on any shortcuts, as that will prevent other applications from recognising your key and performing unforseen tasks you had not expected (e.g. warp scrambling stargates).<br>
+FYI Mumble download page warns that upgrading directly to 1.5.x+ will break mumble on your macOS machine.
-#Click the Add button in the bottom left, which will bring up a new ''Unassigned'' shortcut in the window.<br>
+== References ==
-#Click the ''Unassigned'' word and select ''Whisper/Shout or Whisper'' depending on your Mumble version from the drop-down list.<br>
+<references>
-#Click the ''Empty'' word next to it, which should cause a (...) button to appear next to that - click that to open a new Whisper Target window.<br>[[Image:Shortcut 1.png]]<br><br>
+<ref name="Mac location">https://www.mumble.info/documentation/user/settings-storage-location/</ref>
-#Make that new Whisper Target window look like this (i.e. whisper to current channel highlighted), and then click OK.<br>[[Image:Whisper current target.png]]<br><br>
+</references>
-#Finally click the Shortcut column of your new shortcut and press the key you wish to use.
-#You now have a Command chat key set up for the semi-structured fleet channels!<br>
-Note that it will only talk to Command chat if you yourself are also in Command.&nbsp; If you are in the general fleet channel it will talk to the general fleet ONLY, i.e. not Command.
+{{EVEUniversityNav}}
-<br>
+[[Category:Getting Started]]
+[[Category:Applications]]
-=== Fully structured fleet channels<br>  ===
+[[Category:EVE University Services]]
-This part of the Mumble setup guide focuses on setting up your key shortcuts for the structured fleet channels. These are used mostly for large scale PvP&nbsp;operations (e.g. multiple wings or fleets).<br>
-E-UNI fleets will use four distinct "channels" (these are not real channels as such but the concept helps to understand the difference between the actions behind different hotkeys).
-*Fleet "Channels":
-**'''Squad Channel''' '''(same level)''', where the squad members can have their internal chat without bothering the rest of the fleet (or even their SC)
-**'''Command Channel''' '''(same level)''' for FC, WC, SC and scouts to discuss between themselves
-**'''Report Channel (upwards)''', where squad members reports their actions to their SC, e.g. calling points
-**'''Order Channel'''&nbsp;'''(downwards)''', for command staff to give orders to the members below them in the fleet structure i.e. FC to talk to whole fleet, WC to their wing, SC to their squad
-In structured fleet channels three different hotkeys are used to establish the channels described above, and creating an ability to talk "up" and "down" the command structure. <br>
-<br>
-Your '''normal PTT key''' you set up during Mumble installation acts as the 'same level' shortcut: for squad members it will talk to your "'''Squad Channel'''" (but, do take note, NOT your squad commander); for the FC, WCs, SCs and Scouts, it will talk to the the rest of your command on the "'''Command Channel'''" (because all of the command channel positions are linked).<br>
-<br>
-Both squad members and command positions will need one more shortcut, and it is different depending on your role.<br>
-*For '''squad members''': you will need a '''Whisper/Shout to Parent''' shortcut<br>
-*For '''command channel''': you will need a '''Whisper/Shout to Current''' (including subchannels) shortcut<br>
-==== Whisper/Shout to Parent  ====
-Follow the steps in setting up a shortcut in the previous section.&nbsp; When you get to the Whisper Target window, make it look like this (i.e. Parent highlighted, Whisper/shout to subchannels ticked).<br>
-[[Image:Mumble2.png]]
-It is important the Whisper/Shout to sub-channels <u>is</u> ticked.&nbsp; This is the key that you will use to talk to your Squad Commander (it also talks to the rest of your squad).&nbsp; Note that it will NOT talk to anyone else e.g. FC, Scouts, other squads.<br>
-==== Whisper/Shout to Current  ====
-Follow the steps in setting up a shortcut in the previous section. When you get to the Whisper Target window, make it look like this (i.e. Current highlighted, Whisper/Shout to sub-channels ticked).<br>
-[[Image:Mumble1.png]]
-It is very important that the Whisper to subchannels <u>is</u> ticked.&nbsp; This is the key that you will use to talk to everyone below you in the fleet structure.&nbsp; That is, for FCs it will talk to the whole fleet, for WCs it will talk to your wing, for SCs it will talk to your squad.&nbsp; For Scouts, you should generally not need it, though&nbsp;if you are in the same channel as the FC it will talk to the whole fleet.<br>
-<u>Important note:</u> you can simply edit the key you set up in the Semi-Structured Fleet section to tick the Whisper/Shout to subchannels box.&nbsp; It will make no difference to the way the semi-structured fleet channel works.<br>
-==== Different channels in Different Roles  ====
-Now let's show how the key bindings we made link to the channels we mentioned and how they are used in different roles in a Structured fleet:
-*'''FC: '''
-**Push-to-talk =&gt; Command channel
-**Whisper/Shout to Parent (No use for an FC)
-**Whisper/Shout to Current =&gt; Order channel (I.e. FC giving orders to whole fleet)<br>
-*'''WC/SC: '''
-**Push-to-talk =&gt; Command channel
-**Whisper/Shout to Parent (No use for an WC/SC)
-**Whisper/Shout to Current =&gt; Order channel (I.e. WC/SC giving orders to their wing/squad)
-***Other command staff will not hear SC/WC talking to his/her squad/wing on a squad channel. To keep your FC up to date on what the squad/wing is doing SC/WC must remember to inform also the command channel (Push to talk)<br>
-*'''Scout: '''
-**Push-to-talk =&gt; Command channel
-**Whisper/Shout to Parent (No use for a scout)
-**Whisper/Shout to Current (No use for a scout, though you could use it to talk to the whole fleet)<br>
-*'''Squad member: '''
-**Push-to-talk =&gt; Squad channel (without SC!)
-***Squad Commander will not hear squad members talking in squad channel. Use report channel (Shout-to-Parent) if you want your SC to hear you
-**Whisper/Shout to Parent =&gt; Report channel (own squad including SC)
-***Other command staff will not hear reports (e.g. call of points) made by a squad members to their SC using the report channel! SC has to make sure to keep your FC up to date by relaying important bits of information to command channel (using their Push-to-talk key)
-**Whisper/Shout to Current =&gt; (No use for a squad member)
-In short, the structured fleet channels enable great streamlining and filtering of information. This way, fleet commanders can focus on leading the fleet rather than having to process endless streams of information and squad members and their commanders can coordinate more efficiently amongst themselves. On the other hand, all this requires a great deal more communication and discretion in doing so from SC’s to the rest of command.
-== Overlay  ==
-[[Image:MumbleOverlay.png|right|Sample overlay]] Mumble provides a very handy and customizable overlay. To configure it go to Configure - Settings and pick the Overlay option
-Sample settings are provided below that will put the overlay near the top left corner, fitting in one person just perfectly if you've got the left-side menu narrow (sample to the right). If more than one person talks they might overlap your Current Location info. ''Be sure to disable the "Always Show Self" option after you've played with where the overlay goes.''
-Overlay not showing up? Make sure you start Mumble before starting the Eve Online Client.
-[[Image:MumbleOverlaySettings.png|Sample overlay]]
-'''Note:''' In 1.2.3-rc2, setting up the overlay is a bit different. The developers added a way to move around the overlay on your screen, but in doing so also made it harder to set the "Only talking" option. Go to Configure - Settings and pick the Overlay option, then right-click on the Overlay preview (see image), hover over "Filters", and select "Only show talking".
-[[Image:Mumblercoverlay.png|The RC overlay settings window]]
-<br>
-=== Overlay in Linux  ===
-To actually display the overlay over Eve in Linux after you've enabled it in Mumble's settings you need to have Mumble launched first and then run '''mumble-overlay''' in front of the wine command that you use to launch Eve. For example:
-''mumble-overlay wine explorer /desktop=Eve,1600x1200 "C:\Program Files\CCP\EVE\eve.exe"''
-If you use a WINEPREFIX, then you would insert it after the WINEPREFIX variable like so:
-''WINEPREFIX=/home/username/bin/wine/wine-eve/ mumble-overlay wine explorer /desktop=Eve,3200x1180 "C:\Program Files\CCP\EVE\eve.exe"''
-=== Overlay on Mac  ===
-Mumble 1.2.2 overlay does not work with eve on mac with ati graphics card. Version 1.2.3-rc1 seems to work.
-Note to display the overlay in eve you must start mumble before starting eve.
-To Enable the overlay goto Preferences and Click overlay top right button. Click the enable overlay tickbox on the top left corner of the window then using the screen display below drag and size the overlay position to a point on a screen that you feel comfortable with. The red spot moves the anchor of the overlay. You can change the size of the name displayed using mouse scroll wheel.
-=== Version 1.2.3  ===
-The new 1.2.3 RC2 has a working overlay. Claims that sound from the game won't work are unfounded. After dragging the Mumble Icon out of the dmg which mounts after your download to your folder of choice, right click the icon and choose "Show Package Contents" Navigate to the following folder:
-[http://Mumble.app/Contents/Resources/MumbleOverlay.pkg Mumble.app/Contents/Resources/MumbleOverlay.pkg]
-Launch the package and run the installer. Restart mumble and enable your overlay! Launch Eve as normal; no command line is necessary.