Difference between revisions of "Incursion fitting principles"
(Partial rewrite, more focus on the consequences of your choices and for the tank fits, a natural progression so that people can see how a vanguard fit transforms into an assalt and headquarter fit.) |
|||
Line 3: | Line 3: | ||
Incursion fleets rely on good resists and buffer supported by a logistics. There are simply too many enemies to be able to fit a strong enough local tank, not to mention that by sacrificing a small portion of your fleet to bring in logistics instead of more damage dealers, the rest of the damage dealers can fit more offensive modules and your fleet will perform better. | Incursion fleets rely on good resists and buffer supported by a logistics. There are simply too many enemies to be able to fit a strong enough local tank, not to mention that by sacrificing a small portion of your fleet to bring in logistics instead of more damage dealers, the rest of the damage dealers can fit more offensive modules and your fleet will perform better. | ||
− | Once you have a good enough tank, the rest of your spare slots should be used to augment your damage potential. While there's such a thing as under-tanked, being over-tanked is not only wasteful in incursions but even dangerous if done at the cost of | + | Once you have a good enough tank, the rest of your spare slots should be used to augment your damage potential. While there's such a thing as under-tanked, being over-tanked is not only wasteful in incursions but even dangerous if done at the cost of offence. |
See [[Preparing for Incursions]] for more information about what skills are needed. | See [[Preparing for Incursions]] for more information about what skills are needed. | ||
− | == Omni damage == | + | == Omni damage and resists == |
− | The Sansha incursion rats deal two | + | The Sansha incursion rats deal damage in two ways, lasers (EM and thermal) and torpedoes (kinetic and explosive). As such, they hit across all four resist types. While you can sometimes compensate for a low kinetic resist by having a higher explosive resist, or get away with lower resists due to having a small signature and high speed, generally you don't have the luxury of having resist holes in incursions. |
− | + | Just as they do damage across the board, the Sansha incursion rats have omni tanks as well. The only notable exception is the '''Lirsautton Parichaya''', it's a little weaker against thermal damage and stronger against explosive damage. So contrary to missions where Amarr and Gallente weapons are somewhat limited due to their set damage types, these weapons are not hampered by resists in incursions. | |
− | + | You can find out more statistics about the Sansha incursion rats on the [[Sansha's Manual]] page. | |
− | + | == Applied DPS == | |
+ | One of the most important aspects to realize is that whatever DPS (damage per second) your favourite third party fitting tool tells you that you have, or whatever the fitting window ingame tells you, is worth nothing if you cannot apply that damage. Hence the term ''"applied DPS"'' as opposed to ''"paper DPS"'' which is basically just your potential damage. | ||
+ | |||
+ | Your velocity, your target's velocity, approach vectors, your gun's signature resolution, your target's ship signature, locking speed, locking range, your weapon's optimal and falloff range and tracking all play a vital part in how much of your damage you'll be able to apply on your enemy. See [[Turret Damage|turret damage]] or the [[Gunnery Guide|gunnery guide]] for a more comprehensive introduction to the factors determining how much damage you'll end up doing when you undock and leave your theoretical bubble. Practically this means that utility modules often make or break fleets. | ||
+ | |||
+ | We always use faction ammunition in incursions for the added damage compared to regular tech one ammunition. Certain tech two ammunition is used for specific ships or roles, like '''Null L''' for blaster boats or '''Scorch L''' for pulse lasers, but most of the time you'll be using faction ammunition since it does not suffer the tracking or range penalties most short range tech two ammunitions do. | ||
+ | |||
+ | == Utility modules == | ||
+ | Utility modules refer to modules you fit that doesn't directly give you a higher dps in your favourite third party fitting program or on your fitting screen ingame. Instead they act as force multipliers of sorts making up for weaknesses or capitalize on strengths for increased efficiency. There are also modules that has no impact on your offensive capabilities, but are invaluable when things go wrong. | ||
+ | {| class="wikitable" style="font-size:90%" | ||
+ | ! style="background:#222222;" | [[image:icon mid slot.png|24px|Utility midslot]] Utility medium slots | ||
+ | ! style="background:#222222;" | [[image:icon hi slot.png|24px|Utility highslot]] Utility high slots | ||
+ | ! style="background:#222222;" | [[image:icon drones.png|24px|Utility drones]] Utility drones | ||
+ | |- | ||
+ | | valign="top" style="padding:4px;" | {{icon|sensor resolution|24}} '''Sensor Booster II'''<br>[[image:icon_stasis_webifier_faction.png|24px|link=]] '''Federation Navy Stasis Webifier'''<br>[[image:icon_tracking_computer_i.png|24px|link=]] '''Tracking Computer II'''<br>[[image:icon_target_painter_i.png|24px|link=]] '''Phased Weapon Navigation Array ...''' | ||
+ | | valign="top" style="padding:4px;" | [[image:icon_shield_transporter_i.png|24px|link=]] Large S95a Remote Shield Booster<br>[[image:icon_remote_capacitor_transmitter_i.png|24px|link=]] Large 'Regard' Capacitor Transmitters<br>[[image:icon auto targeting system i.png|24px|link=]] Auto Targeting System I<br>[[image:icon_drone_link_augmentor_i.png|24px|link=]] Drone Link Augmentor I | ||
+ | | valign="top" style="padding:4px;" | [[image:Icon ISIS weapon Drones.png|24px|link=]] Heavy Shield Maintenance Bot I<br>[[image:Icon ISIS weapon Drones.png|24px|link=]] Medium Shield Maintenance Bot I<br>[[image:Icon ISIS weapon Drones.png|24px|link=]] Light Shield Maintenance Bot I<br>[[image:Icon ISIS weapon Drones.png|24px|link=]] Light Armor Maintenance Bot I | ||
+ | |} | ||
+ | For vanguards we make sure we have at least one sensor booster and one web. If we have room for more midslots we primarily go for a second web first before looking into other modules. For assaults and up, once you've ensured that you have the locking range needed (potentially requires you to use a sensor booster) and fitted any required propulsion modules. For utility highslots, pick the most important one. So a capacitor transmitter if you run with Basilisks or need a cap chain and a remote shield booster if you run with Scimitars or have no need for a cap chain. Should you have the luxury of having more than one utility highslot, just bring both. If you have no use for either or lack the powergrid to fit them you could use an auto targeter for more locks, drone link augmentor for longer drone control range etc. | ||
+ | |||
+ | ==== Supporting short or long range setups ==== | ||
+ | The priority for certain utility modules change depending on your setup. If you're fighting mostly within web range, webs themselves end up giving you far more applied damage than tracking computers do. On top of that, they benefit everyone who's shooting that target and not just you. But if you're engaging primarily at range, outside web range, a web is utterly useless and you benefit more from a target painter or local tracking computers to improve your damage application. While sensor boosters are critical in [[Incursion_sites#Vanguard_sites|vanguards]], they are less important in [[Incursion_sites#Assault_sites|assaults]] and [[Incursion_sites#Headquarter_sites|headquarters]]. | ||
+ | |||
+ | Below are some examples of how you could change your midslots depending on your fleet composition for vanguards. | ||
+ | {| class="wikitable" style="font-size:90%" | ||
+ | ! style="background:#111111;" colspan="2" | Short range | ||
+ | ! style="background:#111111;" colspan="2" | Long range | ||
+ | |- | ||
+ | ! style="background:#222222;" | Flexible<small> <ref>If your fleet has a decent amount of webs already, a tracking computer to increase your tracking or extend your range will benefit you more than adding another web.</ref></small> | ||
+ | ! style="background:#222222;" | Dedicated webber<small> <ref>If you're one of the few with webs, use as many as possible to capitalize on your role.</ref></small> | ||
+ | ! style="background:#222222;" | Flexible<small> <ref>In fleets where you're shooting targets both at range and within web range, a mix might be beneficial if you don't have dedicated webbers.</ref></small> | ||
+ | ! style="background:#222222;" | Alpha doctrine<small> <ref>In a setup where you rely on shooting things where they spawn, you need both the tracking and range as well as the ability to quickly lock targets up. In competitions the faster lock time is also advantageous.</ref></small> | ||
+ | |- | ||
+ | | valign="top" style="padding:4px;" | {{icon|sensor resolution|24}} '''Sensor Booster II'''<br>[[image:icon_stasis_webifier_faction.png|24px|link=]] '''Federation Navy Stasis Webifier'''<br>[[image:icon_stasis_webifier_faction.png|24px|link=]] '''Federation Navy Stasis Webifier'''<br>[[image:icon_tracking_computer_i.png|24px|link=]] '''Tracking Computer II''' | ||
+ | | valign="top" style="padding:4px;" | {{icon|sensor resolution|24}} '''Sensor Booster II'''<br>[[image:icon_stasis_webifier_faction.png|24px|link=]] '''Federation Navy Stasis Webifier'''<br>[[image:icon_stasis_webifier_faction.png|24px|link=]] '''Federation Navy Stasis Webifier'''<br>[[image:icon_stasis_webifier_faction.png|24px|link=]] '''Federation Navy Stasis Webifier''' | ||
+ | | valign="top" style="padding:4px;" | {{icon|sensor resolution|24}} '''Sensor Booster II'''<br>[[image:icon_stasis_webifier_faction.png|24px|link=]] '''Federation Navy Stasis Webifier'''<br>[[image:icon_target_painter_i.png|24px|link=]] '''Phased Weapon Navigation Array ...'''<br>[[image:icon_tracking_computer_i.png|24px|link=]] '''Tracking Computer II''' | ||
+ | | valign="top" style="padding:4px;" | {{icon|sensor resolution|24}} '''Sensor Booster II'''<br>{{icon|sensor resolution|24}} '''Sensor Booster II'''<br>[[image:icon_tracking_computer_i.png|24px|link=]] '''Tracking Computer II'''<br>[[image:icon_tracking_computer_i.png|24px|link=]] '''Tracking Computer II'''<br> | ||
+ | |} | ||
+ | <small><references/></small> | ||
+ | When in doubt, just follow the recommended fits on the [[Vanguard Incursion fits|Vanguard]] and [[Assault Incursion fits|Assault]] fitting pages or ask your '''fleet commander''' for advice. See [[Anatomy of Incursions]] for more information on how you can change these modules around for different tactics based on your fleet composition. | ||
+ | |||
+ | == Drones == | ||
+ | Drones can be a tremendous asset, if you pick the right ones and use them intelligently. The sum of all the drones in fleet can easily amount to the equivalent of adding an extra pilot or two on grid, so it's not something to treat lightly. See [[Anatomy_of_Incursions#Utilizing_drones|utilizing drones]] for more information on how to make the most of drones. | ||
− | == Resist | + | When selecting drones you need to factor in how to get the best mix of microwarpdrive and orbital speeds, tracking and optimal range for the type of fleet and sites you run. Amarr drones generally provide the best mix for most situations except for headquarter sites. Below are the drones we recommend within our community. |
+ | {| class="wikitable" style="text-align:center;" | ||
+ | ! style="background:#222222;" | Recommended drones/site | ||
+ | ! style="background:#222222;" | Light drones | ||
+ | ! style="background:#222222;" | Medium drones | ||
+ | ! style="background:#222222;" | Heavy drones | ||
+ | ! style="background:#222222;" | Sentry drones | ||
+ | |- valign="top" | ||
+ | | style="text-align:left;" | [[image:incursions vanguard icon.png|18px|Vanguard sites]] [[Incursion sites#Vanguard sites|Vanguard sites]] | ||
+ | | '''Acolyte II''' | ||
+ | | <small>{{co|grey|Not recommended}}</small> | ||
+ | | <small>{{co|grey|Not recommended}}</small> | ||
+ | | {{co|slateblue|'''Garde II'''}}<small> <ref>{{co|slateblue|(Situational)}} Unbonused sentries have considerably lower tracking and needs to operate at range or stay on cruisers..</ref></small> | ||
+ | |- valign="top" | ||
+ | | style="text-align:left;" | [[image:incursions assault icon.png|18px|Assault sites]] [[Incursion sites#Assault sites|Assault sites]] | ||
+ | | '''Acolyte II''' | ||
+ | | '''Infiltrator II''' | ||
+ | | <small>{{co|grey|Not recommended}}</small> | ||
+ | | {{co|slateblue|'''Curator II'''}}<small> <ref>{{co|slateblue|(Situational)}} In order to use '''Curator II''' drones you need to remain stationary more often than not. The extra range of curators is needed for the 35 - 65 km engagement range.</ref></small> | ||
+ | |- valign="top" | ||
+ | | style="text-align:left;" | [[image:incursions headquarter icon.png|18px|Headquarter sites]] [[Incursion sites#Headquarter sites|Headquarter sites]]<small> <ref>Drones are often put on stationary objects in headquarter sites, thus focus shifts from '''Amarr drones''' (speed and application) to '''Gallente drones''' (maximum damage).</ref></small> | ||
+ | | '''Hobgoblin II''' | ||
+ | | '''Hammerhead II''' | ||
+ | | '''Ogre II'''<small> <ref>If cost isn't an issue, '''Gecko''' or ''''Augmented' Ogre''' drones are preferred due to increased speed and better damage application.</ref></small> | ||
+ | | <small>{{co|grey|Not recommended}}</small> | ||
+ | |} | ||
+ | <small><references/></small> | ||
+ | |||
+ | == Rigging choice == | ||
+ | [[image:albert_einstein.jpg|thumb|200px|[http://en.wikipedia.org/wiki/Albert_Einstein ''"It’s all relative, you might say."'']]] | ||
+ | It's very easy to dismiss the importance of the rig selection when buying a new ship. While it's usually not something a new pilot needs to worry about when getting any of the minimum fits posted on the wiki, it's extremely important for people looking to get a new ship as it heavily influences your options in terms of flexibility and utility slots (which is everything in incursions). Don't spend too much ISK on a temporary setup, either go for a cheap ''"good enough"'' setup while you're saving up for your ideal setup, or just wait until you can afford the whole setup you want in the end. | ||
+ | |||
+ | ==== Electromagnetic or thermal rig ==== | ||
+ | In general the electromagnetic rig will free up more midslots, but tends to require fancier deadspace modules to compensate for the overall lower resists. The thermal rig gives you a stronger and more flexible tank without having to rely on the high-end deadspace modules, at the cost of not being able to free up as many midslots. | ||
+ | |||
+ | ==== Defence or offence ==== | ||
+ | Going for offence means that you're limited to a single tech one resist rig in combination to your burst rig, due to the high calibration cost of the tech two damage rig. Choosing a more defensive setup will allow you to fit a tech two resist rig as well as making full use of the other two rigs. The offensive rigs are usually much cheaper than the defensive ones, but since the offensive setup usually has to up the quality of their deadspace modules to get a comparable resist profile, they're often forced to use higher tiered deadspace mods. | ||
+ | |||
+ | ==== Flexibility vs efficiency vs cost ==== | ||
+ | Given the different needs for tank and utility modules between the different type of sites, most incursion communities go for the most efficient rig setup for the kind of sites they are running. A community running vanguards exclusively often have different setups than those who run headquarters only. Communities that push for high-end fits with expensive deadspace modules usually have different rig selections too, since those stronger modules opens up for a few more options. | ||
+ | |||
+ | Going for the most efficient setup is of course always going to be the strongest way to do it, but sometimes you have to be practical. In our case, within our community, we factor in flexibility and cost a lot more. We want our members to be able to use the same ship for any type of site without having to resort to spending billions on faction and deadspace modules. That doesn't stop people who want to from doing it, but it does mean that some of our recommended fits will differ quite a lot from that of public communities. | ||
+ | {{clear}} | ||
+ | |||
+ | == Faction and deadspace upgrades == | ||
+ | There are many ways to use faction and deadspace modules to vastly improve the efficiency of your incursion ship. Some of these modules are cheap and might not be too much of a concern or downright required (like the '''Federation Navy Stasis Webifier'''), but others are worth quite a bit of ISK and a second thought is warranted if you consider getting them. The cost of improving your efficiency rises exponentially as well, so while the first round of upgrades might be very cost-efficient, taking it one step further will quickly put you in a position where you're literally throwing ISK away for minor improvements. | ||
+ | |||
+ | Consider the actual benefit you will get from upgrading a certain module. Getting a deadspace hardener is useful for most ships as it frees up a midslot and potentially a lowslot as well. But a faction tracking computer or a sensor booster might make sense for public fleets built to compete, but for our community that is hardly a worthwhile investment. | ||
+ | ==== What do you get in return? ==== | ||
+ | To put this into perspective you need to factor in [[stacking penalties]]. If you're just using one module to a given effect, it's easy to calculate and see the difference, but when you have more intricate combinations where things end up 2nd, 3rd, 4th or 5th in the stacking hierarchy, it might be a little harder to see what you get out of it. | ||
+ | ==== Worthwhile investments ==== | ||
+ | Here's a list of some modules that are worth upgrading. While some give a larger effect, they all contribute enough to warrant their cost. That said, just because the A-type is very efficient doesn't mean everyone should get one, as you can often get by with a B- or even a C-type for certain fits. | ||
+ | {| class="wikitable" | ||
+ | ! style="background-color:#222222;" | Module | ||
+ | ! style="background-color:#222222;" | Benefit | ||
+ | |- | ||
+ | | [[image:Icon_hardener_adaptive_deadspace.png|64px|link=]] | ||
+ | | 1 x {{co|mediumslateblue|Pithum C-Type Adaptive Invulnerability Field}} is {{co|lightgreen|35,42%}} stronger than an {{co|grey|Adaptive Invulnerability Field II}} (top of the hierarchy<small> <ref name="top">The modules are on the top, meaning the first module gets 100% effect, second 86,9%, third 57,1% all according to normal [[stacking penalties|stacking penalty rules]].</ref></small>)<br>1 x {{co|mediumslateblue|Pithum B-Type Adaptive Invulnerability Field}} is {{co|lightgreen|45,83%}} stronger than an {{co|grey|Adaptive Invulnerability Field II}} (top of the hierarchy<small> <ref name="top"></ref></small>)<br>1 x {{co|mediumslateblue|Pithum A-Type Adaptive Invulnerability Field}} is {{co|lightgreen|46,875%}} stronger than an {{co|grey|Adaptive Invulnerability Field II}} (top of the hierarchy<small> <ref name="top"></ref></small>) | ||
+ | |- | ||
+ | | [[image:Icon_tracking_computer_faction.png|64px|link=]] | ||
+ | | 1 x {{co|mediumslateblue|Federation Navy Tracking Computer}} is {{co|lightgreen|3,85%}} stronger than a {{co|grey|Tracking Computer II}}.<br>2 x {{co|mediumslateblue|Federation Navy Tracking Computers}} are {{co|lightgreen|7,43%}} stronger (top of the hierarchy<small> <ref name="top"></ref></small>).<br>2 x {{co|mediumslateblue|Federation Navy Tracking Computers}} are {{co|lightgreen|5,97%}} stronger (if you get a link<small> <ref name="link">Remote tracking computers, remote sensor boosters and tech two burst rigs are stronger and thus pushes the modules down to 2nd and 3rd (etc) in the hierarchy, meaning they are both penalized and working at 86,9% and 57,1% respectively (or more if you stack more modules).</ref></small>). | ||
+ | |- | ||
+ | | [[image:Icon_sensor_booster_faction.png|64px|link=]] | ||
+ | | 1 x {{co|mediumslateblue|Serpentis Sensor Booster}} is {{co|lightgreen|3,12%}} stronger than a {{co|grey|Sensor Booster II}}.<br>2 x {{co|mediumslateblue|Serpentis Sensor Boosters}} are {{co|lightgreen|6,07%}} stronger (top of the hierarchy<small> <ref name="top"></ref></small>).<br>2 x {{co|mediumslateblue|Serpentis Sensor Boosters}} are {{co|lightgreen|5,04%}} stronger (if you get a resebo<small> <ref name="link"></ref></small>). | ||
+ | |- | ||
+ | | https://image.eveonline.com/Type/15895_64.png | ||
+ | | 1 x {{co|mediumslateblue|Federation Navy Magnetic Field Stabilizer}} is {{co|lightgreen|2,27%}} more effective compared to {{co|grey|Magnetic Field Stabilizer II}}.<br>4 x {{co|mediumslateblue|Federation Navy Magnetic Field Stabilizers}} are {{co|lightgreen|6,45%}} stronger (top of the hierarchy<small> <ref name="top"></ref></small>).<br>4 x {{co|mediumslateblue|Federation Navy Magnetic Field Stabilizers}} are {{co|lightgreen|4,36%}} stronger (if you have a T2 burst rig)<small> <ref name="link"></ref></small>). | ||
+ | |} | ||
+ | <small><references/></small> | ||
+ | |||
+ | ==== Questionable investments ==== | ||
+ | These modules fall into the category of ''"more ISK than sense"'', as they give very little or in some cases no actual improvement. | ||
+ | {| class="wikitable" | ||
+ | ! style="background-color:#222222;" | Module | ||
+ | ! style="background-color:#222222;" | Benefit | ||
+ | |- | ||
+ | | https://image.eveonline.com/Type/15965_64.png | ||
+ | | 1 x {{co|mediumslateblue|Republic Fleet Tracking Enhancer}} is only {{co|crimson|0,46%}} stronger than a {{co|grey|Tracking Enhancer II}}.<br>2 x {{co|mediumslateblue|Republic Fleet Tracking Enhancers}} are only {{co|crimson|0,67%}} stronger (2nd and 3rd in the hierarchy<small> <ref name="stack">'''Tracking Computer''', both local and remote ones from scimitars, that are scripted for tracking are stronger than the tracking bonus from tracking enhancers. So if you have a tracking computer, or two, or an incoming link, the small bonus will be 2nd and 3rd, 3rd and 4th or even 5th and 6nd (suffering harsh [[stacking penalties]]).</ref></small>).<br>2 x {{co|mediumslateblue|Republic Fleet Tracking Enhancers}} are only {{co|crimson|0,41%}} stronger (3rd and 4th in the hierarchy)<small> <ref name="stack"></ref></small>). | ||
+ | |} | ||
+ | <small><references/></small> | ||
+ | |||
+ | == Determining a proper tank == | ||
+ | There are a few easy ways to determine whether a tank is ok or not. Below are some key aspects that help when you're testing your ship in your favourite third-party fitting tool or if you've taken on the role of [[Roles_in_Incursions#Waitlist_manager|waitlist manager]] and need to quickly gauge whether the fit someone x up with is ok or not. | ||
+ | |||
+ | ==== Resist holes ==== | ||
A lot of ships share a standard resist profile, so they share the same resist holes and have the same issues and weaknesses. Understanding what innate weaknesses a ship has is key to knowing how to best raise it to the desired high average resists mentioned above. | A lot of ships share a standard resist profile, so they share the same resist holes and have the same issues and weaknesses. Understanding what innate weaknesses a ship has is key to knowing how to best raise it to the desired high average resists mentioned above. | ||
− | Below is a list of different resist profiles for various ship classes as well as a few specific ships with deviating profiles. The last column lists the obvious weaknesses of the class/hull, which will help you determine how to best achieve the desired resist profile. | + | Below is a list of different resist profiles for various ship classes as well as a few specific ships with deviating profiles. The last column lists the obvious weaknesses of the class/hull, which will help you determine how to best achieve the desired resist profile. Plugging a hole is usually a simple matter of adding a resist rig or a combination of a rig and a shield amplifier, then up the resists in general by using one or two invulnerability fields. |
{| class="wikitable" style="font-size:90%; vertical-align:middle; padding:0px; border-collapse:collapse;"" | {| class="wikitable" style="font-size:90%; vertical-align:middle; padding:0px; border-collapse:collapse;"" | ||
! style="background:#222222;" | Ship | ! style="background:#222222;" | Ship | ||
Line 31: | Line 157: | ||
| nowrap style="background:#111111;" | [[Image:icon_resist_em.png|24px|Electromagnetic resistance]]20%[[Image:icon_resist_therm.png|24px|Thermal resistance]]36%[[Image:icon_resist_kin.png|24px|Kinetic resistance]]52%[[Image:icon_resist_exp.png|24px|Explosive resistance]]60% | | nowrap style="background:#111111;" | [[Image:icon_resist_em.png|24px|Electromagnetic resistance]]20%[[Image:icon_resist_therm.png|24px|Thermal resistance]]36%[[Image:icon_resist_kin.png|24px|Kinetic resistance]]52%[[Image:icon_resist_exp.png|24px|Explosive resistance]]60% | ||
| Weak {{co|slateblue|EM}} and {{co|crimson|thermal}} resists, but no resist holes. | | Weak {{co|slateblue|EM}} and {{co|crimson|thermal}} resists, but no resist holes. | ||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
| Scimitar | | Scimitar | ||
Line 43: | Line 165: | ||
| nowrap style="background:#111111;" | [[Image:icon_resist_em.png|24px|Electromagnetic resistance]] 0%[[Image:icon_resist_therm.png|24px|Thermal resistance]]80%[[Image:icon_resist_kin.png|24px|Kinetic resistance]]70%[[Image:icon_resist_exp.png|24px|Explosive resistance]]50% | | nowrap style="background:#111111;" | [[Image:icon_resist_em.png|24px|Electromagnetic resistance]] 0%[[Image:icon_resist_therm.png|24px|Thermal resistance]]80%[[Image:icon_resist_kin.png|24px|Kinetic resistance]]70%[[Image:icon_resist_exp.png|24px|Explosive resistance]]50% | ||
| An {{co|slateblue|EM}} hole. | | An {{co|slateblue|EM}} hole. | ||
+ | |} | ||
+ | <small><references/></small> | ||
+ | ==== Effective shield hit points ==== | ||
+ | You can judge your tank by many means, but for Incursions the best way to measure your tank is to look at '''effective shield hit points''' (ESHP), as opposed to '''damage per second repaired''' (DPS-tank) or the generic '''effective hit points''' (EHP). This is because a lot of ships have significant armour and hull hit points, so the effective hit points value can be quite misleading on a battleship with a damage control for example, as the EHP-value skyrockets compared to a ship without a damage control fitted, but very little of it applies to the actual ESHP. You also need to factor in things like speed and signature, because a smaller ship that is orbiting will be a lot harder to hit than a large, stationary ship. So don't casually compare a ship's effective shield hit points against another without taking that into your consideration. | ||
+ | |||
+ | ==== Shield hit points and resists ==== | ||
+ | While the above mentioned effective shield hit points is a good measure, it is not always practical to use on the fly. For one it doesn't really tell you if the ship has any glaring resist holes, so for practical reasons we tend to speak in more general terms -- Shield hit points and resists. It's much easier to just ask the pilot ''"How many raw shield hit points do you have?"'' and ''"What are your resists if you undock and turn on all your modules?"''. It's very easy for people to check this ingame and it tells us enough to judge whether or not the fit is ok. | ||
+ | |||
+ | ==== Guidelines ==== | ||
+ | Below are some rough guidelines for what a proper tank might be for a battleship (there isn't much variation to speak of for logistics). Since we focus mainly on low skilled, kitchen sink setups we're going with a relatively high recommended level for our community. The values below are of raw shield hit points and paired average resists (EM/thermal and kinetic/explosive), values '''before boosts''' for easy comparison. | ||
+ | {| | ||
+ | | valign="middle" | [[image:Incursions_vanguard_icon.png|42px|Vanguards]] | ||
+ | | valign="middle" | [[Incursion sites#Vanguard sites|Vanguards]] ''(33k+ effective shield hit points)''<br>70% resists and at least 10,000 raw shield hit points. | ||
|- | |- | ||
− | | | + | | valign="middle" | [[image:Incursions_assault_icon.png|42px|Assaults]] |
− | + | | valign="middle" | [[Incursion sites#Assault sites|Assaults]] ''(40k+ effective shield hit points)''<br>70% resists and at least 12,000 raw shield hit points. | |
− | |||
|- | |- | ||
− | | | + | | valign="middle" | [[image:Incursions_headquarter_icon.png|42px|Headquarters]] |
− | + | | valign="middle" | [[Incursion sites#Headquarter sites|Headquarters]] ''(52k+ effective shield hit points + 100k effective hit points in total)''<br>73% resists and at least 14,000 raw shield hit points. | |
− | | | + | |} |
+ | Naturally lower shield hit points is doable if you adjust your resists accordingly. In vanguards and assaults it's also possible to drop a little lower in really good fleets. Just remember that resists are far more important than raw shield hit points, as higher resists has the secondary benefit of increasing the efficiency of remote repairs. Below is a graph illustrating how damage changes with scaling resists. | ||
+ | {| class="wikitable" style="font-size:90%; cellspacing:0px; border-spacing:0; border-collapse:collapse; border:0px;" | ||
+ | ! colspan="2" style="background-color:#222222;" | Resists | ||
+ | ! style="background-color:#222222;" | Actual damage taken | ||
|- | |- | ||
− | | | + | | style="background-color:#300000; padding-left:5px; padding-right:5px;" | 61% resists |
− | | | + | | rowspan="7" style="background-image: linear-gradient(#AA0000, #00AA00); background-color: #111111; width:0.25em"| |
− | + | | style="background-color:#300000; padding-left:5px; padding-right:5px;" | 30% more damage ''(39% damage taken)'' | |
|- | |- | ||
− | | | + | | style="background-color:#200000; padding-left:5px; padding-right:5px;" | 64% resists |
− | | | + | | style="background-color:#200000; padding-left:5px; padding-right:5px;" | 20% more damage ''(36% damage taken)'' |
− | |||
|- | |- | ||
− | | | + | | style="background-color:#100000; padding-left:5px; padding-right:5px;" | 67% resists |
− | + | | style="background-color:#100000; padding-left:5px; padding-right:5px;" | 10% more damage (33% damage taken) | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | | style="background-color:# | ||
− | |||
|- | |- | ||
− | | style=" | + | | style="padding-left:5px; padding-right:5px;" | {{co|yellow|70% resists}} |
− | | style="padding: | + | | style="padding-left:5px; padding-right:5px;" | {{co|yellow|Baseline damage ''(30% damage taken)''}} |
|- | |- | ||
− | | style="background-color:# | + | | style="background-color:#001000; padding-left:5px; padding-right:5px;" | 73% resists |
− | | style="padding: | + | | style="background-color:#001000; padding-left:5px; padding-right:5px;" | 10% less damage (27% damage taken) |
|- | |- | ||
− | | style="background-color:# | + | | style="background-color:#002000; padding-left:5px; padding-right:5px;" | 76% resists |
− | | style="padding: | + | | style="background-color:#002000; padding-left:5px; padding-right:5px;" | 20% less damage (24% damage taken) |
|- | |- | ||
− | | style="background-color:# | + | | style="background-color:#003000; padding-left:5px; padding-right:5px;" | 79% resists |
− | + | | style="background-color:#003000; padding-left:5px; padding-right:5px;" | 30% less damage (21% damage taken) | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | | style="background-color:# | ||
− | |||
|- | |- | ||
− | |||
− | |||
|} | |} | ||
− | |||
− | == | + | ==== Stacking penalties and offgrid boosts ==== |
− | + | A ship with fewer modules or rigs stacking will also benefit more from boosts, thus not suffering quite as much as they might initially seem to. This of course means they also have more to lose if boosts go down, which is worth noting. | |
− | + | Further down this page you'll see examples of this with the advanced setups, if you pay attention to the normal resist profiles vs the resist profile with offgrid boosts. The EM-rig setup for vanguards for example has a deceptively low EM/thermal resist, averaging around 62% instead of the recommended 70%. This would suggest nearly +30% more damage taken from turret damage, as your resists are almost 9% lower (see the graph above). But due to less stacking penalties that setup ends up having roughly 69% average EM/thermal resists after boosts which is fairly close to the 72% of our recommended fits and will eventually only take +10% more damage from turrets, while taking torpedoes just fine. | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | = Battleship setups = | |
+ | Below are some examples of tank setups for battleships, both the setups we use for our minimum fits as well as some advanced ones for high-end ships. | ||
− | + | In order to highlight the transition of each type of fit from vanguards to headquarters, each setup will not only show the vanguard fit in question, but also how it works if you take off some tank as well as what's needed to make that setup work for assaults and headquarters. | |
− | + | == Minimum setup == | |
− | + | This is the minimum skill setup that we use within our community. It is designed to cheap and flexible enough to be useful in a variety of different sites. For assaults and headquarters, we often use a '''Large Shield Extender II''' to ensure that everyone has enough buffer, even with the minimum skills we require. | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | This assumes our [[Preparing_for_Incursions#Damage_dealers|minimum skills]] so the {{icon|em resist|20}}EM resist can be up to '''2% higher''' with {{sk|EM Shield Compensation|V}} instead of III. | |
+ | {| class="wikitable" style="font-size:90%; text-align:left; padding:0px; border-collapse:collapse;" | ||
+ | |- | ||
+ | ! style="background:#222222;" | <small>Slots</small> | ||
+ | | style="background:#222222; text-align:center;" | '''Vanguard''' ''(less tank)''<small> <ref>In a good fleet with excellent damage projection, with an experienced fleet commander and seasoned logistics, you can usually remove the damage control in favour of more damage mods.</ref></small> | ||
+ | ! style="background:#222222;" | Vanguard | ||
+ | ! style="background:#222222;" | Assault | ||
+ | ! style="background:#222222;" | Headquarter | ||
+ | |- valign="top" | ||
+ | | nowrap style="text-align:center; background:#111111;" | [[image:icon mid slot.png|24px]] | ||
+ | | nowrap style="vertical-align:middle;" | [[image:icon mid slot.png|24px]] Freed up mid slot<br>[[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br>[[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br>[[image:Module icon em ward amplifier tech2.png|24px|EM Ward Amplifier II]] EM Ward Amplifier II | ||
+ | | nowrap style="vertical-align:middle;" | [[image:icon mid slot.png|24px]] Freed up mid slot<br>[[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br>[[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br>[[image:Module icon em ward amplifier tech2.png|24px|EM Ward Amplifier II]] EM Ward Amplifier II | ||
+ | | nowrap style="vertical-align:middle;" | [[image:icon_shield_extender_ii.png|24px|Large Shield Extender II]] Large Shield Extender II<br>[[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br>[[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br>[[image:Module icon em ward amplifier tech2.png|24px|EM Ward Amplifier II]] EM Ward Amplifier II | ||
+ | | nowrap style="vertical-align:middle;" | [[image:icon_shield_extender_ii.png|24px|Large Shield Extender II]] Large Shield Extender II<br>[[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br>[[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br>[[image:icon shield amplifier deadspace.png|24px|Pithum C-Type EM Ward Amplifier]] {{co|crimson|Pithum C-Type EM Ward Amplifier}}<small> <ref name="upgrade">This is a necessary upgrade in order to improve overall resists for headquarter sites.</ref></small> | ||
+ | |- valign="top" | ||
+ | | nowrap style="text-align:center; background:#111111;" | [[image:icon low slot.png|24px]] | ||
+ | | nowrap | [[image:icon low slot.png|24px]] Freed up low slot | ||
+ | | nowrap | [[image:module icon damage control tech2.png|24px]] Damage Control II | ||
+ | | nowrap | [[image:module icon damage control tech2.png|24px]] Damage Control II | ||
+ | | nowrap | [[image:module icon damage control tech2.png|24px]] Damage Control II | ||
+ | |- valign="top" | ||
+ | | nowrap style="text-align:center; background:#111111;" | [[image:icon rigs.png|24px]] | ||
+ | | nowrap | [[image:module icon shield rig tech1.png|24px|Large Anti-Thermal Screen Reinforcer I]] Anti-Thermal Screen Reinforcer I | ||
+ | | nowrap | [[image:module icon shield rig tech1.png|24px|Large Anti-Thermal Screen Reinforcer I]] Anti-Thermal Screen Reinforcer I | ||
+ | | nowrap | [[image:module icon shield rig tech1.png|24px|Large Anti-Thermal Screen Reinforcer I]] Anti-Thermal Screen Reinforcer I | ||
+ | | nowrap | [[image:module icon shield rig tech2.png|24px|Large Anti-Thermal Screen Reinforcer II]] {{co|crimson|Anti-Thermal Screen Reinforcer II}}<small> <ref name="upgrade"></ref> | ||
+ | |- valign="middle" | ||
+ | ! style="text-align:center; background:#222222;" | [[image:icon_resists.png|24px|Normal resist profile.]] | ||
+ | ! nowrap style="background:#222222;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]65,2%[[Image:icon_resist_therm.png|20px|Thermal resistance]]65,7%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]69,0%[[Image:icon_resist_exp.png|20px|Explosive resistance]]74,1% | ||
+ | ! nowrap style="background:#222222;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]69,5%[[Image:icon_resist_therm.png|20px|Thermal resistance]]70,0%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]72,8%[[Image:icon_resist_exp.png|20px|Explosive resistance]]77,4% | ||
+ | ! nowrap style="background:#222222;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]69,5%[[Image:icon_resist_therm.png|20px|Thermal resistance]]70,0%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]72,8%[[Image:icon_resist_exp.png|20px|Explosive resistance]]77,4% | ||
+ | ! nowrap style="background:#222222;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]71,9%[[Image:icon_resist_therm.png|20px|Thermal resistance]]72,1%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]72,8%[[Image:icon_resist_exp.png|20px|Explosive resistance]]77,4% | ||
+ | |- valign="middle" align="center" | ||
+ | ! style="background:#001000; padding:0px;" | {{icon|warfare link|24|Resist profile with warfare links active.}} | ||
+ | ! nowrap style="background:#001000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]67,7%[[Image:icon_resist_therm.png|20px|Thermal resistance]]68,2%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]73,5%[[Image:icon_resist_exp.png|20px|Explosive resistance]]77,9% | ||
+ | ! nowrap style="background:#001000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]71,7%[[Image:icon_resist_therm.png|20px|Thermal resistance]]72,2%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]76,8%[[Image:icon_resist_exp.png|20px|Explosive resistance]]80,7% | ||
+ | ! nowrap style="background:#001000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]71,7%[[Image:icon_resist_therm.png|20px|Thermal resistance]]72,2%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]76,8%[[Image:icon_resist_exp.png|20px|Explosive resistance]]80,7% | ||
+ | ! nowrap style="background:#001000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]73,9%[[Image:icon_resist_therm.png|20px|Thermal resistance]]74,2%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]76,8%[[Image:icon_resist_exp.png|20px|Explosive resistance]]80,7% | ||
+ | <!-- | ||
− | + | Overheating and neuted out ... | |
− | + | |- valign="top" | |
− | ! style=" | + | ! style="text-align:center; vertical-align:middle; background:#200000; padding:0px;" | [[image:icon overheating.png|24px|Resist profile when you're overheating your defensive modules.]] |
− | + | ! nowrap style="background:#200000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% | |
− | ! style="background | + | ! nowrap style="background:#200000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% |
− | + | ! nowrap style="background:#200000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% | |
− | + | ! nowrap style="background:#200000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% | |
− | ! style="background | + | |- valign="top" |
− | |- | + | ! style="text-align:center; vertical-align:middle; background:#0F0719; padding:0px;" | [[image:Icon energy neutralizer i.png|24px|Resist profile if all your defensive modules run out of capacitor and turn off.]] |
− | | | + | ! nowrap style="background:#0F0719;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% |
− | | | + | ! nowrap style="background:#0F0719;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% |
− | | [[ | + | ! nowrap style="background:#0F0719;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% |
− | | | + | ! nowrap style="background:#0F0719;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% |
− | | | + | --> |
− | | [[ | ||
− | |||
− | | | ||
− | |||
− | | [[ | ||
− | | | ||
− | | | ||
− | | [[ | ||
− | |||
− | | | ||
− | | | ||
− | | [[ | ||
− | | | ||
− | | | ||
− | | [[ | ||
− | |||
− | | | ||
− | | | ||
− | | [[ | ||
− | | | ||
− | |||
− | | [[ | ||
|} | |} | ||
<small><references/></small> | <small><references/></small> | ||
− | + | === Resist bonused ships === | |
+ | Ships like the [[Rokh]] with resist bonuses can fit slightly different due to their higher base resistances. | ||
− | + | This assumes our [[Preparing_for_Incursions#Damage_dealers|minimum skills]] so the various resist can be up to '''3% higher''' with {{sk|Caldari Battleship|V}} instead of III and in the case of the headquarter fit with the EM amplifier, additional {{icon|em resist|20}}EM resist can be gained by training {{sk|EM Shield Compensation|V}}. | |
− | + | {| class="wikitable" style="font-size:90%; text-align:left; padding:0px; border-collapse:collapse;" | |
− | {| class="wikitable | + | |- |
− | + | ! style="background:#222222;" | <small>Slots</small> | |
− | ! style="background | + | | style="background:#222222; text-align:center;" | '''Vanguard''' ''(less tank)''<small> <ref>In a good fleet with excellent damage projection, with an experienced fleet commander and seasoned logistics, you can usually remove the damage control in favour of more damage mods.</ref></small> |
− | + | ! style="background:#222222;" | Vanguard | |
− | + | ! style="background:#222222;" | Assault | |
− | ! style="background | + | ! style="background:#222222;" | Headquarter |
− | ! style="background | + | |- valign="top" |
− | |- | + | | nowrap style="text-align:center; background:#111111;" | [[image:icon mid slot.png|24px]] |
− | | | + | | nowrap style="vertical-align:middle;" | [[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br>[[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br>[[image:icon mid slot.png|24px]] Freed up mid slot |
− | | | + | | nowrap style="vertical-align:middle;" | [[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br>[[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br>[[image:icon mid slot.png|24px]] Freed up mid slot |
− | | [[ | + | | nowrap style="vertical-align:middle;" | [[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br>[[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br>[[image:icon mid slot.png|24px]] Freed up mid slot |
− | | | + | | nowrap style="vertical-align:middle;" | [[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br>[[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br>[[image:Module icon em ward amplifier tech2.png|24px|EM Ward Amplifier II]] EM Ward Amplifier II |
− | | | + | |- valign="top" |
− | | [[ | + | | nowrap style="text-align:center; background:#111111;" | [[image:icon low slot.png|24px]] |
− | |- | + | | nowrap | [[image:icon low slot.png|24px]] Freed up low slot |
− | | | + | | nowrap | [[image:module icon damage control tech2.png|24px]] Damage Control II |
− | | | + | | nowrap | [[image:module icon damage control tech2.png|24px]] Damage Control II |
− | | [[ | + | | nowrap | [[image:module icon damage control tech2.png|24px]] Damage Control II |
− | | | + | |- valign="top" |
− | | | + | | nowrap style="text-align:center; background:#111111;" | [[image:icon rigs.png|24px]] |
− | | [[ | + | | nowrap | [[image:module icon shield rig tech1.png|24px|Large Anti-Thermal Screen Reinforcer I]] Anti-Thermal Screen Reinforcer I<br>[[image:module icon shield rig tech1.png|24px|Large Anti-EM Screen Reinforcer I]] Anti-EM Screen Reinforcer I |
− | | | + | | nowrap | [[image:module icon shield rig tech1.png|24px|Large Anti-Thermal Screen Reinforcer I]] Anti-Thermal Screen Reinforcer I<br>[[image:module icon shield rig tech1.png|24px|Large Anti-EM Screen Reinforcer I]] Anti-EM Screen Reinforcer I |
− | | | + | | nowrap | [[image:module icon shield rig tech1.png|24px|Large Anti-Thermal Screen Reinforcer I]] Anti-Thermal Screen Reinforcer I<br>[[image:module icon shield rig tech1.png|24px|Large Anti-EM Screen Reinforcer I]] Anti-EM Screen Reinforcer I |
− | | | + | | nowrap | [[image:module icon shield rig tech1.png|24px|Large Anti-Thermal Screen Reinforcer I]] Anti-Thermal Screen Reinforcer I<br>[[image:module icon shield rig tech1.png|24px|Large Anti-EM Screen Reinforcer I]] Anti-EM Screen Reinforcer I |
− | | [[ | + | |- valign="top" |
− | | | + | ! style="text-align:center; background:#222222;" | [[image:icon_resists.png|24px|Normal resist profile.]] |
− | | | + | ! nowrap style="background:#222222;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]62,3%[[Image:icon_resist_therm.png|20px|Thermal resistance]]69,8%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]72,7%[[Image:icon_resist_exp.png|20px|Explosive resistance]]77,2% |
− | | [[ | + | ! nowrap style="background:#222222;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]67,0%[[Image:icon_resist_therm.png|20px|Thermal resistance]]73,6%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]76,1%[[Image:icon_resist_exp.png|20px|Explosive resistance]]80,1% |
− | |- | + | ! nowrap style="background:#222222;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]67,0%[[Image:icon_resist_therm.png|20px|Thermal resistance]]73,6%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]76,1%[[Image:icon_resist_exp.png|20px|Explosive resistance]]80,1% |
− | | {{icon| | + | ! nowrap style="background:#222222;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]75,4%[[Image:icon_resist_therm.png|20px|Thermal resistance]]73,6%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]76,1%[[Image:icon_resist_exp.png|20px|Explosive resistance]]80,1% |
− | | | + | |- valign="top" |
− | | [[ | + | ! style="text-align:center; vertical-align:middle; background:#001000; padding:0px;" | {{icon|warfare link|24|Resist profile with warfare links active.}} |
− | | | + | ! nowrap style="background:#001000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]65,0%[[Image:icon_resist_therm.png|20px|Thermal resistance]]72,0%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]76,7%[[Image:icon_resist_exp.png|20px|Explosive resistance]]80,6% |
− | | | + | ! nowrap style="background:#001000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]69,4%[[Image:icon_resist_therm.png|20px|Thermal resistance]]75,5%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]79,6%[[Image:icon_resist_exp.png|20px|Explosive resistance]]83,0% |
− | | [[ | + | ! nowrap style="background:#001000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]69,4%[[Image:icon_resist_therm.png|20px|Thermal resistance]]75,5%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]79,6%[[Image:icon_resist_exp.png|20px|Explosive resistance]]83,0% |
− | | | + | ! nowrap style="background:#001000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]76,1%[[Image:icon_resist_therm.png|20px|Thermal resistance]]75,5%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]79,6%[[Image:icon_resist_exp.png|20px|Explosive resistance]]83,0% |
− | | | + | <!-- |
− | | | ||
− | |||
− | | [[ | ||
− | | | ||
− | | [[ | ||
− | |||
− | < | ||
− | |||
− | + | Resist profile with overheat & neuted out. | |
− | + | |- valign="top" | |
− | + | ! style="text-align:center; vertical-align:middle; background:#200000; padding:0px;" | [[image:icon overheating.png|24px|Resist profile when you're overheating your defensive modules.]] | |
− | ! style="background | + | ! nowrap style="background:#200000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% |
− | ! style="background | + | ! nowrap style="background:#200000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% |
− | ! style="background | + | ! nowrap style="background:#200000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% |
− | ! style="background | + | ! nowrap style="background:#200000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% |
− | |- | + | |- valign="top" |
− | | | + | ! style="text-align:center; vertical-align:middle; background:#0F0719; padding:0px;" | [[image:Icon energy neutralizer i.png|24px|Resist profile if all your defensive modules run out of capacitor and turn off.]] |
− | | | + | ! nowrap style="background:#0F0719;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% |
− | | [[ | + | ! nowrap style="background:#0F0719;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% |
− | | | + | ! nowrap style="background:#0F0719;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% |
− | |- | + | ! nowrap style="background:#0F0719;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% |
− | | | + | --> |
− | | | ||
− | | [[ | ||
− | | | ||
− | |- | ||
− | | | ||
− | | | ||
− | | [[ | ||
− | | | ||
− | |- | ||
− | | | ||
− | | | ||
− | | [[ | ||
− | | | ||
|} | |} | ||
<small><references/></small> | <small><references/></small> | ||
− | + | === Navy & Fleet Issue ships with four midslots === | |
+ | Ships like the [[Apocalypse Navy Issue]] and the [[Megathron Navy Issue]] with only four midslots aren't recommended for incursions, mostly due to their lack of midslots but also due to being armour based and suffering from fairly low shield hit points (and in the case of the apocalypse serious capacitor issues) which just compounds the issues of these ships. Within certain limits they can still do reasonably well in vanguards and assaults, but they are unable to do headquarter sites both from an efficiency point of view as well as due to their weak tank. | ||
− | + | Navy and Fleet Issue ships have higher rig calibration points than other ships (400 points instead of the regular 350 points). | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
{| class="wikitable" style="font-size:90%; text-align:left; padding:0px; border-collapse:collapse;" | {| class="wikitable" style="font-size:90%; text-align:left; padding:0px; border-collapse:collapse;" | ||
|- | |- | ||
− | ! style="background:#222222;" | Slots | + | ! style="background:#222222;" | <small>Slots</small> |
− | + | | style="background:#222222; text-align:center;" | '''Vanguard''' ''(less tank)''<small> <ref>In a good fleet with excellent damage projection, with an experienced fleet commander and seasoned logistics, you can usually remove the damage control in favour of more damage mods.</ref></small> | |
− | ! style="background:#222222;" | | + | ! style="background:#222222;text-align:center;" | Vanguard |
− | + | | style="background:#222222;text-align:center;" | '''Assault''' ''(less tank)''<small> <ref>This setup is considerably weaker than your average assault setup, even with the extra shield extender. Its considerably weaker resists means repairs are less effective.</ref></small> | |
|- valign="top" | |- valign="top" | ||
| nowrap style="text-align:center; background:#111111;" | [[image:icon mid slot.png|24px]] | | nowrap style="text-align:center; background:#111111;" | [[image:icon mid slot.png|24px]] | ||
− | | nowrap style="vertical-align:middle;" | [[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br> | + | | nowrap style="vertical-align:middle;" | [[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br>[[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br>[[image:icon mid slot.png|24px]] Freed up mid slot |
− | [[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br> | + | | nowrap style="vertical-align:middle;" | [[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br>[[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br>[[image:icon mid slot.png|24px]] Freed up mid slot |
− | [[image: | + | | nowrap style="vertical-align:middle;" | [[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br>[[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br>[[image:icon shield extender ii.png|24px]] Large Shield Extender II<small> <ref>The '''Large Shield Extender II''' module is often needed in assaults for armour tanked ships to compensate for lower innate shield hit points.</ref></small> |
− | | nowrap style="vertical-align:middle;" | [[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br> | ||
− | [[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br> | ||
− | [[image:icon mid slot.png|24px]] Freed up mid slot | ||
− | | nowrap style="vertical-align:middle;" | [[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br> | ||
− | [[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br> | ||
− | [[image:icon | ||
|- valign="top" | |- valign="top" | ||
| nowrap style="text-align:center; background:#111111;" | [[image:icon low slot.png|24px]] | | nowrap style="text-align:center; background:#111111;" | [[image:icon low slot.png|24px]] | ||
+ | | nowrap | [[image:icon low slot.png|24px]] Freed up low slot | ||
| nowrap | [[image:module icon damage control tech2.png|24px]] Damage Control II | | nowrap | [[image:module icon damage control tech2.png|24px]] Damage Control II | ||
− | |||
| nowrap | [[image:module icon damage control tech2.png|24px]] Damage Control II | | nowrap | [[image:module icon damage control tech2.png|24px]] Damage Control II | ||
|- valign="top" | |- valign="top" | ||
| nowrap style="text-align:center; background:#111111;" | [[image:icon rigs.png|24px]] | | nowrap style="text-align:center; background:#111111;" | [[image:icon rigs.png|24px]] | ||
− | | nowrap | [[image:module icon shield rig tech1.png|24px|Large | + | | nowrap | [[image:module icon shield rig tech1.png|24px|Large Anti-Thermal Screen Reinforcer I]] Anti-Thermal Screen Reinforcer I<br>[[image:module icon shield rig tech2.png|24px|Large Anti-EM Screen Reinforcer II]] Anti-EM Screen Reinforcer II |
− | [[image:module icon shield rig | + | | nowrap | [[image:module icon shield rig tech1.png|24px|Large Anti-Thermal Screen Reinforcer I]] Anti-Thermal Screen Reinforcer I<br>[[image:module icon shield rig tech2.png|24px|Large Anti-EM Screen Reinforcer II]] Anti-EM Screen Reinforcer II |
− | + | | nowrap | [[image:module icon shield rig tech1.png|24px|Large Anti-Thermal Screen Reinforcer I]] Anti-Thermal Screen Reinforcer I<br>[[image:module icon shield rig tech2.png|24px|Large Anti-EM Screen Reinforcer II]] Anti-EM Screen Reinforcer II | |
− | | nowrap | [[image:module icon shield rig tech1.png|24px|Large | ||
− | [[image:module icon shield rig | ||
− | [[image:module icon shield rig tech1.png|24px|Large Anti-Thermal Screen Reinforcer I]] Anti-Thermal Screen Reinforcer | ||
− | |||
− | [[image:module icon shield rig tech2.png|24px|Large Anti-EM Screen Reinforcer II]] Anti-EM Screen Reinforcer II | ||
− | |||
|- valign="top" | |- valign="top" | ||
− | ! style="text-align:center; background:# | + | ! style="text-align:center; background:#222222;" | [[image:icon_resists.png|24px|Normal resist profile.]] |
− | ! nowrap style="background:#222222;" | [[Image:icon_resist_em.png| | + | ! nowrap style="background:#222222;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]60,2%[[Image:icon_resist_therm.png|20px|Thermal resistance]]65,7%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]69,0%[[Image:icon_resist_exp.png|20px|Explosive resistance]]74,1% |
− | ! nowrap style="background:#222222;" | [[Image:icon_resist_em.png| | + | ! nowrap style="background:#222222;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]65,2%[[Image:icon_resist_therm.png|20px|Thermal resistance]]70,0%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]72,8%[[Image:icon_resist_exp.png|20px|Explosive resistance]]77,4% |
− | ! nowrap style="background:# | + | ! nowrap style="background:#222222;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]65,2%[[Image:icon_resist_therm.png|20px|Thermal resistance]]70,0%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]72,8%[[Image:icon_resist_exp.png|20px|Explosive resistance]]77,4% |
+ | |- valign="top" | ||
+ | ! style="text-align:center; vertical-align:middle; background:#001000; padding:0px;" | {{icon|warfare link|24|Resist profile with warfare links active.}} | ||
+ | ! nowrap style="background:#001000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]63,1%[[Image:icon_resist_therm.png|20px|Thermal resistance]]68,2%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]73,5%[[Image:icon_resist_exp.png|20px|Explosive resistance]]77,9% | ||
+ | ! nowrap style="background:#001000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]67,7%[[Image:icon_resist_therm.png|20px|Thermal resistance]]72,2%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]76,8%[[Image:icon_resist_exp.png|20px|Explosive resistance]]80,7% | ||
+ | ! nowrap style="background:#001000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]67,7%[[Image:icon_resist_therm.png|20px|Thermal resistance]]72,2%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]76,8%[[Image:icon_resist_exp.png|20px|Explosive resistance]]80,7% | ||
+ | <!-- | ||
+ | |||
+ | Resist profile with overheat & neuted out. | ||
+ | |||
|- valign="top" | |- valign="top" | ||
! style="text-align:center; vertical-align:middle; background:#200000; padding:0px;" | [[image:icon overheating.png|24px|Resist profile when you're overheating your defensive modules.]] | ! style="text-align:center; vertical-align:middle; background:#200000; padding:0px;" | [[image:icon overheating.png|24px|Resist profile when you're overheating your defensive modules.]] | ||
− | ! nowrap style="background:#200000;" | [[Image:icon_resist_em.png| | + | ! nowrap style="background:#200000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% |
− | ! nowrap style="background:#200000;" | [[Image:icon_resist_em.png| | + | ! nowrap style="background:#200000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% |
− | ! nowrap style="background:#200000;" | [[Image:icon_resist_em.png| | + | ! nowrap style="background:#200000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% |
|- valign="top" | |- valign="top" | ||
! style="text-align:center; vertical-align:middle; background:#0F0719; padding:0px;" | [[image:Icon energy neutralizer i.png|24px|Resist profile if all your defensive modules run out of capacitor and turn off.]] | ! style="text-align:center; vertical-align:middle; background:#0F0719; padding:0px;" | [[image:Icon energy neutralizer i.png|24px|Resist profile if all your defensive modules run out of capacitor and turn off.]] | ||
− | ! nowrap style="background:#0F0719;" | [[Image:icon_resist_em.png| | + | ! nowrap style="background:#0F0719;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% |
− | ! nowrap style="background:#0F0719;" | [[Image:icon_resist_em.png| | + | ! nowrap style="background:#0F0719;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% |
− | ! nowrap style="background:#0F0719;" | [[Image:icon_resist_em.png| | + | ! nowrap style="background:#0F0719;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% |
+ | --> | ||
|} | |} | ||
− | + | <small><references/></small> | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | == Advanced | + | == Advanced fits == |
− | + | While there are several ways to fit high-end ships for incursions, here are some frequently used variants. | |
+ | === Calibration === | ||
+ | Due to the limit of calibration points, there are several combinations available. Here are some common ones. | ||
+ | {| class="wikitable" style="font-size:90%; text-align:left; padding:0px; border-collapse:collapse;" | ||
+ | |- | ||
+ | ! style="background:#222222;" | <small>Slots</small> | ||
+ | ! style="background:#222222;" | Offensive | ||
+ | ! style="background:#222222;" | Defensive | ||
+ | ! style="background:#222222;" | Warp speed | ||
+ | |- valign="top" | ||
+ | | nowrap style="text-align:center; background:#111111;" | [[image:icon mid slot.png|24px]] | ||
+ | | nowrap | [[image:module icon shield rig tech1.png|24px|Large Anti-EM Screen Reinforcer I]] Anti-EM Screen Reinforcer I<br>[[image:module icon hybrid rig tech2.png|24px|Large Hybrid Burst Aerator II]] Large Hybrid Burst Aerator II<small> <ref>This should of course be a '''Energy Burst Aerator II''' for laser weapons and a '''Projectile Burst Aerator II''' for projectile weapons.</ref></small> | ||
+ | | nowrap | [[image:module icon shield rig tech2.png|24px|Large Anti-Thermal Screen Reinforcer I]] Anti-Thermal Screen Reinforcer II<br>[[image:icon mid slot.png|24px]] Spare rig slot<br>[[image:icon mid slot.png|24px]] Spare rig slot | ||
+ | | nowrap | [[image:module icon shield rig tech2.png|24px|Large Anti-EM Screen Reinforcer II]] Anti-EM Screen Reinforcer II<br>[[image:module icon propulsion rig tech2.png|24px|Large Hyperspatial Velocity Optimizer II]] Large Hyperspatial Velocity Optimizer II<br>[[image:icon mid slot.png|24px]] Spare rig slot | ||
+ | |- | ||
+ | | style="background:#222222; text-align:center;" | '''<small>SUM</small>''' | ||
+ | | style="background:#200000; text-align:center;" | '''350/{{co|grey|350}}''' (0 points left) | ||
+ | | style="background:#002000; text-align:center;" | '''75/{{co|grey|350}}''' (275 points left) | ||
+ | | style="background:#002000; text-align:center;" | '''150/{{co|grey|350}}''' (200 points left) | ||
+ | |} | ||
+ | <small><references/></small> | ||
+ | Filling up the spare rig slots is a matter of figuring out what rig benefits you the most, based on the type of fleet compositions you run, what kind of ship you fly and if a rig can in some way help you free up a low- or midslot. If you need more range use a '''Locus Coordinator II''' rig (150 points), if you need more shield hit points use a '''Core Defense Field Extender II''' rig (75 points) and if you need more cap use either a '''Capacitor Control Circuit II''' rig (150 points) or a '''Discharge Elutriation II''' rig (150 points). | ||
+ | |||
+ | Just remember that any offensive rig you fit on your ship '''needs''' to be tech two, otherwise it'll end up at the end of stacking penalties and that will render it completely useless. | ||
+ | |||
+ | === Thermal rig === | ||
+ | The thermal rig setup is primarily a more defensive setup, used for even resists with the ability to really push the resists up. The downside of this setup is that you're forced to use two midslots and cannot drop down to one midslot for vanguards. Depending on what other rigs you use, you'll have enough calibration points to upgrade to a tech two anti-thermal rig further increasing your tank. | ||
− | + | This assumes our [[Preparing_for_Incursions#Damage_dealers|minimum skills]] so the {{icon|em resist|20}}EM resist can be up to '''2% higher''' with {{sk|EM Shield Compensation|V}} instead of III. | |
{| class="wikitable" style="font-size:90%; text-align:left; padding:0px; border-collapse:collapse;" | {| class="wikitable" style="font-size:90%; text-align:left; padding:0px; border-collapse:collapse;" | ||
|- | |- | ||
− | ! style="background | + | ! style="background:#222222;" | <small>Slots</small> |
− | ! style="background | + | ! style="background:#222222;" | Vanguard |
− | ! style="background | + | ! style="background:#222222;" | Assault |
− | ! style="background | + | ! style="background:#222222;" | Headquarter |
+ | | style="background:#222222; text-align:center;" | '''Headquarter''' ''(alternative)''<small> <ref>This alternative is only suitable for ships with a high native shield hit point count like the '''Nightmare''', since it can't really push resists higher without using additional slots (at which point the other option is cheaper and more flexible). This setup also loses the ability to stagger two invulns in order to keep at least one of them up at all times even when neuted out. With just one invuln it is more susceptible to neuts.</ref></small> | ||
|- valign="top" | |- valign="top" | ||
| nowrap style="text-align:center; background:#111111;" | [[image:icon mid slot.png|24px]] | | nowrap style="text-align:center; background:#111111;" | [[image:icon mid slot.png|24px]] | ||
− | | nowrap style="vertical-align:middle;" | [[Image:icon_hardener_adaptive_deadspace.png|24px|Pithum C-Type Adaptive Invulnerability Field]] Pithum C-Type Adaptive Invuln ...<br> | + | | nowrap style="vertical-align:middle;" | [[image:icon mid slot.png|24px]] Freed up mid slot<br>[[Image:icon_hardener_adaptive_deadspace.png|24px|Pithum C-Type Adaptive Invulnerability Field]] Pithum C-Type Adaptive Invuln ...<br>[[image:icon shield amplifier deadspace.png|24px|Pithum C-Type EM Ward Amplifier]] Pithum C-Type EM Ward Amplifier |
− | [[Image: | + | | nowrap style="vertical-align:middle;" | [[image:icon mid slot.png|24px]] Freed up mid slot<br>[[Image:icon_hardener_adaptive_deadspace.png|24px|Pithum C-Type Adaptive Invulnerability Field]] Pithum C-Type Adaptive Invuln ...<br>[[image:icon shield amplifier deadspace.png|24px|Pithum C-Type EM Ward Amplifier]] Pithum C-Type EM Ward Amplifier |
− | [[image:icon | + | | nowrap style="vertical-align:middle;" | [[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br>[[Image:icon_hardener_adaptive_deadspace.png|24px|Pithum C-Type Adaptive Invulnerability Field]] Pithum C-Type Adaptive Invuln ...<br>[[image:icon shield amplifier deadspace.png|24px|Pithum C-Type EM Ward Amplifier]] Pithum C-Type EM Ward Amplifier |
− | | nowrap style="vertical-align:middle;" | [[Image:icon_hardener_adaptive_deadspace.png|24px|Pithum C-Type Adaptive Invulnerability Field]] Pithum C-Type Adaptive Invuln ...<br> | + | | nowrap style="vertical-align:middle;" | [[image:icon mid slot.png|24px]] Freed up mid slot<br>[[Image:icon_hardener_adaptive_deadspace.png|24px|Pithum A-Type Adaptive Invulnerability Field]] {{co|crimson|Pithum A-Type Adaptive Invuln ...}}<small> <ref name="upgrade">This is a necessary upgrade in order to get enough resists with just one invulnerability field for headquarter sites.</ref></small><br>[[image:icon shield amplifier deadspace.png|24px|Pithum C-Type EM Ward Amplifier]] {{co|crimson|Pithum A-Type EM Ward Amplifier}}<small> <ref name="upgrade"></ref></small> |
− | [[image:icon | ||
− | [[image:icon mid slot.png|24px]] Freed up mid slot | ||
− | |||
− | [[image:icon | ||
|- valign="top" | |- valign="top" | ||
| nowrap style="text-align:center; background:#111111;" | [[image:icon low slot.png|24px]] | | nowrap style="text-align:center; background:#111111;" | [[image:icon low slot.png|24px]] | ||
| nowrap | [[image:icon low slot.png|24px]] Freed up low slot | | nowrap | [[image:icon low slot.png|24px]] Freed up low slot | ||
+ | | nowrap | [[image:module icon damage control tech2.png|24px]] Damage Control II | ||
| nowrap | [[image:module icon damage control tech2.png|24px]] Damage Control II | | nowrap | [[image:module icon damage control tech2.png|24px]] Damage Control II | ||
| nowrap | [[image:module icon damage control tech2.png|24px]] Damage Control II | | nowrap | [[image:module icon damage control tech2.png|24px]] Damage Control II | ||
|- valign="top" | |- valign="top" | ||
| nowrap style="text-align:center; background:#111111;" | [[image:icon rigs.png|24px]] | | nowrap style="text-align:center; background:#111111;" | [[image:icon rigs.png|24px]] | ||
− | | nowrap | [[image:module icon shield rig | + | | nowrap | [[image:module icon shield rig tech1.png|24px|Large Anti-Thermal Screen Reinforcer I]] Anti-Thermal Screen Reinforcer I |
− | | nowrap | [[image:module icon shield rig | + | | nowrap | [[image:module icon shield rig tech1.png|24px|Large Anti-Thermal Screen Reinforcer I]] Anti-Thermal Screen Reinforcer I |
− | | nowrap | [[image:module icon shield rig tech1.png|24px|Large Anti- | + | | nowrap | [[image:module icon shield rig tech1.png|24px|Large Anti-Thermal Screen Reinforcer I]] Anti-Thermal Screen Reinforcer I |
− | + | | nowrap | [[image:module icon shield rig tech1.png|24px|Large Anti-Thermal Screen Reinforcer I]] Anti-Thermal Screen Reinforcer I | |
|- valign="top" | |- valign="top" | ||
− | ! style="text-align:center; background:# | + | ! style="text-align:center; background:#222222;" | [[image:icon_resists.png|24px|Normal resist profile.]] |
− | ! nowrap style="background:#222222;" | [[Image:icon_resist_em.png| | + | ! nowrap style="background:#222222;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]66,0%[[Image:icon_resist_therm.png|20px|Thermal resistance]]66,9%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]64,4%[[Image:icon_resist_exp.png|20px|Explosive resistance]]70,3% |
− | ! nowrap style="background:#222222;" | [[Image:icon_resist_em.png| | + | ! nowrap style="background:#222222;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]70,3%[[Image:icon_resist_therm.png|20px|Thermal resistance]]69,3%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]68,8%[[Image:icon_resist_exp.png|20px|Explosive resistance]]74,0% |
− | ! nowrap style="background:#222222;" | [[Image:icon_resist_em.png| | + | ! nowrap style="background:#222222;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]75,4%[[Image:icon_resist_therm.png|20px|Thermal resistance]]74,5%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]77,0%[[Image:icon_resist_exp.png|20px|Explosive resistance]]80,8% |
+ | ! nowrap style="background:#222222;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]75,0%[[Image:icon_resist_therm.png|20px|Thermal resistance]]72,5%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]72,1%[[Image:icon_resist_exp.png|20px|Explosive resistance]]76,8% | ||
+ | |- valign="top" | ||
+ | ! style="text-align:center; vertical-align:middle; background:#001000; padding:0px;" | {{icon|warfare link|24|Resist profile with warfare links active.}} | ||
+ | ! nowrap style="background:#001000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]71,0%[[Image:icon_resist_therm.png|20px|Thermal resistance]]71,8%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]72,4%[[Image:icon_resist_exp.png|20px|Explosive resistance]]77,0% | ||
+ | ! nowrap style="background:#001000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]74,7%[[Image:icon_resist_therm.png|20px|Thermal resistance]]73,8%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]75,8%[[Image:icon_resist_exp.png|20px|Explosive resistance]]79,9% | ||
+ | ! nowrap style="background:#001000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]77,2%[[Image:icon_resist_therm.png|20px|Thermal resistance]]76,4%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]80,4%[[Image:icon_resist_exp.png|20px|Explosive resistance]]83,6% | ||
+ | ! nowrap style="background:#001000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]78,7%[[Image:icon_resist_therm.png|20px|Thermal resistance]]76,6%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]78,4%[[Image:icon_resist_exp.png|20px|Explosive resistance]]82,0% | ||
+ | <!-- | ||
+ | |||
+ | Resist profile with overheat & neuted out. | ||
+ | |||
|- valign="top" | |- valign="top" | ||
− | ! style="text-align:center; vertical-align:middle; background:#200000; padding:0px;" | [[image:icon overheating.png|24px]] | + | ! style="text-align:center; vertical-align:middle; background:#200000; padding:0px;" | [[image:icon overheating.png|24px|Resist profile when you're overheating your defensive modules.]] |
− | ! nowrap style="background:#200000;" | [[Image:icon_resist_em.png| | + | ! nowrap style="background:#200000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% |
− | ! nowrap style="background:#200000;" | [[Image:icon_resist_em.png| | + | ! nowrap style="background:#200000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% |
− | ! nowrap style="background:#200000;" | [[Image:icon_resist_em.png| | + | ! nowrap style="background:#200000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% |
+ | ! nowrap style="background:#200000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% | ||
|- valign="top" | |- valign="top" | ||
− | ! style="text-align:center; vertical-align:middle; background:#0F0719; padding:0px;" | [[image:Icon energy neutralizer i.png|24px]] | + | ! style="text-align:center; vertical-align:middle; background:#0F0719; padding:0px;" | [[image:Icon energy neutralizer i.png|24px|Resist profile if all your defensive modules run out of capacitor and turn off.]] |
− | ! nowrap style="background:#0F0719;" | [[Image:icon_resist_em.png| | + | ! nowrap style="background:#0F0719;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% |
− | ! nowrap style="background:#0F0719;" | [[Image:icon_resist_em.png| | + | ! nowrap style="background:#0F0719;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% |
− | ! nowrap style="background:#0F0719;" | [[Image:icon_resist_em.png| | + | ! nowrap style="background:#0F0719;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% |
+ | ! nowrap style="background:#0F0719;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% | ||
+ | --> | ||
|} | |} | ||
− | + | <small><references/></small> | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | = | + | === Electromagnetic rig === |
− | The | + | The EM rig setup is primarily used to free up as many slots are possible, but requires you to spend considerably more ISK on deadspace hardeners and will still have considerably lower resists for vanguards. |
− | |||
− | |||
{| class="wikitable" style="font-size:90%; text-align:left; padding:0px; border-collapse:collapse;" | {| class="wikitable" style="font-size:90%; text-align:left; padding:0px; border-collapse:collapse;" | ||
− | |- | + | |- |
− | + | ! style="background:#222222;" | <small>Slots</small> | |
− | ! style="background:#222222;" | Assault | + | | style="background:#222222; text-align:center;" | '''Vanguard''' ''(much less tank)''<small> <ref>In a really good fleet with excellent damage projection, with an experienced fleet commander and seasoned logistics, you can usually remove the damage control in favour of more damage mods.</ref></small> |
− | ! style="background:#222222;" | Headquarter | + | | style="background:#222222; text-align:center;" | '''Vanguard'''<small> <ref>This setup is considerably weaker than your average vanguard setup and relies heavily on higher applied damage to mitigate incoming damage by killing them before they get into optimal range.</ref></small> |
+ | ! style="background:#222222;" | Assault | ||
+ | ! style="background:#222222;" | Headquarter | ||
|- valign="top" | |- valign="top" | ||
| nowrap style="text-align:center; background:#111111;" | [[image:icon mid slot.png|24px]] | | nowrap style="text-align:center; background:#111111;" | [[image:icon mid slot.png|24px]] | ||
− | | nowrap | [[image: | + | | nowrap style="vertical-align:middle;" | [[image:icon mid slot.png|24px]] Freed up mid slot<br>[[image:icon mid slot.png|24px]] Freed up mid slot<br>[[Image:icon_hardener_adaptive_deadspace.png|24px|Pithum B-Type Adaptive Invulnerability Field]] Pithum B-Type Adaptive Invuln ... |
− | | nowrap | [[image: | + | | nowrap style="vertical-align:middle;" | [[image:icon mid slot.png|24px]] Freed up mid slot<br>[[image:icon mid slot.png|24px]] Freed up mid slot<br>[[Image:icon_hardener_adaptive_deadspace.png|24px|Pithum B-Type Adaptive Invulnerability Field]] Pithum B-Type Adaptive Invuln ... |
+ | | nowrap style="vertical-align:middle;" | [[image:icon mid slot.png|24px]] Freed up mid slot<br>[[Image:icon_hardener_adaptive_ii.png|24px|Adaptive Invulnerability Field II]] Adaptive Invulnerability Field II<br>[[Image:icon_hardener_adaptive_deadspace.png|24px|Pithum B-Type Adaptive Invulnerability Field]] Pithum B-Type Adaptive Invuln ... | ||
+ | | nowrap style="vertical-align:middle;" | [[image:icon mid slot.png|24px]] Freed up mid slot<br>[[Image:icon_hardener_adaptive_deadspace.png|24px|Pithum B-Type Adaptive Invulnerability Field]] {{co|crimson|Pithum B-Type Adaptive Invuln ...}}<small> <ref>This is a necessary upgrade in order to get your EM and thermal resists up to an acceptable level for headquarter sites, especially if you run with less than recommended shield hit points.</ref></small><br>[[Image:icon_hardener_adaptive_deadspace.png|24px|Pithum B-Type Adaptive Invulnerability Field]] Pithum B-Type Adaptive Invuln ... | ||
|- valign="top" | |- valign="top" | ||
| nowrap style="text-align:center; background:#111111;" | [[image:icon low slot.png|24px]] | | nowrap style="text-align:center; background:#111111;" | [[image:icon low slot.png|24px]] | ||
+ | | nowrap | [[image:icon low slot.png|24px]] Freed up low slot | ||
| nowrap | [[image:module icon damage control tech2.png|24px]] Damage Control II | | nowrap | [[image:module icon damage control tech2.png|24px]] Damage Control II | ||
| nowrap | [[image:module icon damage control tech2.png|24px]] Damage Control II | | nowrap | [[image:module icon damage control tech2.png|24px]] Damage Control II | ||
+ | | nowrap | [[image:module icon damage control tech2.png|24px]] Damage Control II | ||
+ | |- valign="top" | ||
+ | | nowrap style="text-align:center; background:#111111;" | [[image:icon rigs.png|24px]] | ||
+ | | nowrap | [[image:module icon shield rig tech1.png|24px|Large Anti-EM Screen Reinforcer I]] Anti-EM Screen Reinforcer I | ||
+ | | nowrap | [[image:module icon shield rig tech1.png|24px|Large Anti-EM Screen Reinforcer I]] Anti-EM Screen Reinforcer I | ||
+ | | nowrap | [[image:module icon shield rig tech1.png|24px|Large Anti-EM Screen Reinforcer I]] Anti-EM Screen Reinforcer I | ||
+ | | nowrap | [[image:module icon shield rig tech1.png|24px|Large Anti-EM Screen Reinforcer I]] Anti-EM Screen Reinforcer I | ||
+ | |- valign="top" | ||
+ | ! style="text-align:center; background:#222222;" | [[image:icon_resists.png|24px|Normal resist profile.]] | ||
+ | ! nowrap style="background:#222222;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]58,4%[[Image:icon_resist_therm.png|20px|Thermal resistance]]55,0%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]66,3%[[Image:icon_resist_exp.png|20px|Explosive resistance]]71,9% | ||
+ | ! nowrap style="background:#222222;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]63,6%[[Image:icon_resist_therm.png|20px|Thermal resistance]]60,6%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]70,5%[[Image:icon_resist_exp.png|20px|Explosive resistance]]75,4% | ||
+ | ! nowrap style="background:#222222;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]69,8%[[Image:icon_resist_therm.png|20px|Thermal resistance]]70,9%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]78,2%[[Image:icon_resist_exp.png|20px|Explosive resistance]]81,8% | ||
+ | ! nowrap style="background:#222222;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]74,7%[[Image:icon_resist_therm.png|20px|Thermal resistance]]75,6%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]81,7%[[Image:icon_resist_exp.png|20px|Explosive resistance]]84,7% | ||
+ | |- valign="top" | ||
+ | ! style="text-align:center; vertical-align:middle; background:#001000; padding:0px;" | {{icon|warfare link|24|Resist profile with warfare links active.}} | ||
+ | ! nowrap style="background:#001000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]64,6%[[Image:icon_resist_therm.png|20px|Thermal resistance]]65,1%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]73,8%[[Image:icon_resist_exp.png|20px|Explosive resistance]]78,2% | ||
+ | ! nowrap style="background:#001000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]69,0%[[Image:icon_resist_therm.png|20px|Thermal resistance]]69,5%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]77,1%[[Image:icon_resist_exp.png|20px|Explosive resistance]]80,9% | ||
+ | ! nowrap style="background:#001000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]72,1%[[Image:icon_resist_therm.png|20px|Thermal resistance]]75,2%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]81,4%[[Image:icon_resist_exp.png|20px|Explosive resistance]]84,5% | ||
+ | ! nowrap style="background:#001000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]76,6%[[Image:icon_resist_therm.png|20px|Thermal resistance]]79,2%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]84,4%[[Image:icon_resist_exp.png|20px|Explosive resistance]]87,0% | ||
+ | <!-- | ||
+ | |||
+ | Resist profile with overheat & neuted out. | ||
+ | |||
+ | |- valign="top" | ||
+ | ! style="text-align:center; vertical-align:middle; background:#200000; padding:0px;" | [[image:icon overheating.png|24px|Resist profile when you're overheating your defensive modules.]] | ||
+ | ! nowrap style="background:#200000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% | ||
+ | ! nowrap style="background:#200000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% | ||
+ | ! nowrap style="background:#200000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% | ||
+ | ! nowrap style="background:#200000;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% | ||
+ | |- valign="top" | ||
+ | ! style="text-align:center; vertical-align:middle; background:#0F0719; padding:0px;" | [[image:Icon energy neutralizer i.png|24px|Resist profile if all your defensive modules run out of capacitor and turn off.]] | ||
+ | ! nowrap style="background:#0F0719;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% | ||
+ | ! nowrap style="background:#0F0719;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% | ||
+ | ! nowrap style="background:#0F0719;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% | ||
+ | ! nowrap style="background:#0F0719;" | [[Image:icon_resist_em.png|20px|Electromagnetic resistance]]-%[[Image:icon_resist_therm.png|20px|Thermal resistance]]-%[[Image:icon_resist_kin.png|20px|Kinetic resistance]]-%[[Image:icon_resist_exp.png|20px|Explosive resistance]]-% | ||
+ | --> | ||
|} | |} | ||
<small><references/></small> | <small><references/></small> | ||
+ | = Strategic cruisers and command ships = | ||
+ | While a lot of communities avoid strategic cruisers and command ships due to the fact that their damage output cannot match that of pirate faction battleships, we still allow them as they can easily match the efficiency of tech one battleships. As such, we welcome properly fit strategic cruisers and command ships in our community, as they are good enough for our purposes and we don't benefit from alienating people who prefer to fly smaller ships. | ||
+ | |||
+ | Just be sure to inform people that if they have plans to fly with public communities, they will most likely need to train into a proper battleship. | ||
+ | == Different resist profiles == | ||
+ | One of the biggest differences fitting strategic cruisers and command ships compared to battleships is that they have a different resist profile. They are also much smaller in signature, especially the strategic cruisers, so won't need the same raw buffer of shield hit points either. As such, the solution could range from anything between a thermal and EM hardener for the '''Legion''' to a mere anti-EM rig on the '''Tengu''' or an invulnerability field for the '''Sleipnir'''. | ||
+ | {| class="wikitable" style="font-size:90%; vertical-align:middle; padding:0px; border-collapse:collapse;"" | ||
+ | ! style="background:#222222;" | Ship | ||
+ | ! style="background:#222222;" | Base resist profile | ||
+ | ! style="background:#222222;" | Comments | ||
+ | |- | ||
+ | | nowrap | Astarte / Proteus | ||
+ | | nowrap style="background:#111111;" | [[Image:icon_resist_em.png|24px|Electromagnetic resistance]] 0%[[Image:icon_resist_therm.png|24px|Thermal resistance]]60%[[Image:icon_resist_kin.png|24px|Kinetic resistance]]85%[[Image:icon_resist_exp.png|24px|Explosive resistance]]50% | ||
+ | | An {{co|slateblue|EM}} hole. | ||
+ | |- | ||
+ | | nowrap | Legion | ||
+ | | nowrap style="background:#111111;" | [[Image:icon_resist_em.png|24px|Electromagnetic resistance]] 0%[[Image:icon_resist_therm.png|24px|Thermal resistance]]20%[[Image:icon_resist_kin.png|24px|Kinetic resistance]]70%[[Image:icon_resist_exp.png|24px|Explosive resistance]]87,5% | ||
+ | | An {{co|slateblue|EM}} hole and weak {{co|crimson|thermal}} resists. | ||
+ | |- | ||
+ | | nowrap | Loki<small> <ref name="resist_subsystem">This is with the '''resist bonused''' defensive subsystem fitted.</ref></small> | ||
+ | | nowrap style="background:#111111;" | [[Image:icon_resist_em.png|24px|Electromagnetic resistance]]80%[[Image:icon_resist_therm.png|24px|Thermal resistance]]60%[[Image:icon_resist_kin.png|24px|Kinetic resistance]]52%[[Image:icon_resist_exp.png|24px|Explosive resistance]]60% | ||
+ | | No resist holes. | ||
+ | |- | ||
+ | | nowrap | Sleipnir | ||
+ | | nowrap style="background:#111111;" | [[Image:icon_resist_em.png|24px|Electromagnetic resistance]]75%[[Image:icon_resist_therm.png|24px|Thermal resistance]]60%[[Image:icon_resist_kin.png|24px|Kinetic resistance]]40%[[Image:icon_resist_exp.png|24px|Explosive resistance]]50% | ||
+ | | No resist holes. | ||
+ | |- | ||
+ | | nowrap | Tengu<small> <ref name="resist_subsystem"></ref></small> | ||
+ | | nowrap style="background:#111111;" | [[Image:icon_resist_em.png|24px|Electromagnetic resistance]]20%[[Image:icon_resist_therm.png|24px|Thermal resistance]]84%[[Image:icon_resist_kin.png|24px|Kinetic resistance]]76%[[Image:icon_resist_exp.png|24px|Explosive resistance]]60% | ||
+ | | Weak {{co|slateblue|EM}} resists. | ||
+ | |- | ||
+ | | nowrap | Vulture | ||
+ | | nowrap style="background:#111111;" | [[Image:icon_resist_em.png|24px|Electromagnetic resistance]] 0%[[Image:icon_resist_therm.png|24px|Thermal resistance]]80%[[Image:icon_resist_kin.png|24px|Kinetic resistance]]70%[[Image:icon_resist_exp.png|24px|Explosive resistance]]50% | ||
+ | | An {{co|slateblue|EM}} hole. | ||
+ | |} | ||
+ | <small><references/></small> | ||
= Recommended implants = | = Recommended implants = | ||
{{note box|Consider having a clone dedicated for doing incursions during peace, with suitable implants, as well as a cheaper clone you can use during war. That way you won't have to risk the expensive implants during war.}} | {{note box|Consider having a clone dedicated for doing incursions during peace, with suitable implants, as well as a cheaper clone you can use during war. That way you won't have to risk the expensive implants during war.}} | ||
Line 437: | Line 586: | ||
{| style="font-size:90%;" | {| style="font-size:90%;" | ||
|- | |- | ||
− | | [[image:icon_implant_hardwiring.png|24px]] | + | | [[image:icon_implant_hardwiring.png|24px]] {{co|coral|'''Eifyr and Co. 'Gunslinger' Motion Prediction MR-703'''}} ''(slot 7, +3% turret tracking speed)''<small> <ref>For the high-end tracking speed implants, the {{co|coral|'''Ogdin's Eye Coordination Enhancer'''}} implant is often much cheaper than the 6% implant from CONCORD. It only requires {{sk|Cybernetics|III}}.</ref></small> |
|- | |- | ||
− | | [[image:icon_implant_hardwiring.png|24px]] | + | | [[image:icon_implant_hardwiring.png|24px]] {{co|coral|'''Inherent Implants 'Lancer' Gunnery RF-903'''}} ''(slot 9, +3% rate of fire)''<small> <ref>For the high-end rate of fire implants there's the {{co|coral|'''Pashan's Turret Customization Mindlink'''}} implant that gives +7% rate of fire for all turrets, but it is a very expensive implant. It only requires {{sk|Cybernetics|IV}}.</ref></small> |
|- | |- | ||
− | | [[image:icon_implant_hardwiring.png|24px]] | + | | [[image:icon_implant_hardwiring.png|24px]] {{co|coral|'''Eifyr and Co. 'Gunslinger' Surgical Strike SS-903'''}} ''(slot 9, +3% turret damage)'' |
|} | |} | ||
For '''Battleships''' and large guns, the next implant is split across each racial weapon system. | For '''Battleships''' and large guns, the next implant is split across each racial weapon system. | ||
{| style="font-size:90%;" | {| style="font-size:90%;" | ||
|- | |- | ||
− | | [[image:icon_implant_hardwiring.png|24px]] | + | | [[image:icon_implant_hardwiring.png|24px]] {{co|coral|'''Eifyr and Co. 'Gunslinger' Large Projectile Turret LP-1003'''}} ''(slot 10, +3% to large projectile weapons)'' |
|- | |- | ||
− | | [[image:icon_implant_hardwiring.png|24px]] | + | | [[image:icon_implant_hardwiring.png|24px]] {{co|coral|'''Inherent Implants 'Lancer' Large Energy Turret LE-1003'''}} ''(slot 10, +3% to large energy weapons)''<small> <ref>For the high-end laser implants there's the {{co|coral|'''Pashan's Turret Handling Mindlink'''}} which gives +7% damage to large energy weapons, but it's also a very expensive implant. It only requires {{sk|Cybernetics|IV}}.</ref></small> |
|- | |- | ||
− | | [[image:icon_implant_hardwiring.png|24px]] | + | | [[image:icon_implant_hardwiring.png|24px]] {{co|coral|'''Zainou 'Deadeye' Large Hybrid Turret LH-1003'''}} ''(slot 10, +3% to large hybrid weapons)'' |
|} | |} | ||
For those flying '''strategic cruisers''' as their preferred ships, there's an implant for slot 8.<small> <ref>Note that the 5% versions of these three implants are disproportionately cheap, often running somewhat below the price for the 3% versions.</ref></small> | For those flying '''strategic cruisers''' as their preferred ships, there's an implant for slot 8.<small> <ref>Note that the 5% versions of these three implants are disproportionately cheap, often running somewhat below the price for the 3% versions.</ref></small> | ||
{| style="font-size:90%;" | {| style="font-size:90%;" | ||
|- | |- | ||
− | | [[image:icon_implant_hardwiring.png|24px]] | + | | [[image:icon_implant_hardwiring.png|24px]] {{co|coral|'''Eifyr and Co. 'Gunslinger' Medium Projectile Turret MP-803'''}} ''(slot 8, +3% to medium projectiles)'' |
|- | |- | ||
− | | [[image:icon_implant_hardwiring.png|24px]] | + | | [[image:icon_implant_hardwiring.png|24px]] {{co|coral|'''Inherent Implants 'Lancer' Medium Energy Turret ME-803'''}} ''(slot 8, +3% to medium energy weapons)'' |
|} | |} | ||
<small><references/></small> | <small><references/></small> | ||
Line 466: | Line 615: | ||
{| style="font-size:90%;" | {| style="font-size:90%;" | ||
|- | |- | ||
− | | [[image:perception.png|24px|link=]] | + | | [[image:perception.png|24px|link=]] {{co|coral|'''Genolution Core Augmentation CA-1'''}} ''(slot 1, increases powergrid and capacitor)'' |
|- | |- | ||
− | | [[image:intelligence.png|24px|link=]] | + | | [[image:intelligence.png|24px|link=]] {{co|coral|'''Genolution Core Augmentation CA-2'''}} ''(slot 4, increases CPU and capacitor)'' |
|- | |- | ||
− | | [[image:willpower.png|24px|link=]] | + | | [[image:willpower.png|24px|link=]] {{co|coral|'''Genolution Core Augmentation CA-3'''}} ''(slot 3, increases velocity and shield capacity)'' |
|- | |- | ||
− | | [[image:memory.png|24px|link=]] | + | | [[image:memory.png|24px|link=]] {{co|coral|'''Genolution Core Augmentation CA-4'''}} ''(slot 2, increases agility and armour hit points)'' |
|} | |} | ||
Line 479: | Line 628: | ||
{| style="font-size:90%;" | {| style="font-size:90%;" | ||
|- | |- | ||
− | | [[image:icon_implant_hardwiring.png|24px]] | + | | [[image:icon_implant_hardwiring.png|24px]] {{co|coral|'''Inherent Implants 'Squire' Energy Systems Operation EO-603'''}} ''(slot 6, decreases capacitor recharge)'' |
|- | |- | ||
− | | [[image:icon_implant_hardwiring.png|24px]] | + | | [[image:icon_implant_hardwiring.png|24px]] {{co|coral|'''Inherent Implants 'Squire' Energy Management EM-803'''}} ''(slot 8, increases capacitor capacity)'' |
|} | |} | ||
== Projectile based ships == | == Projectile based ships == | ||
Line 489: | Line 638: | ||
{| style="font-size:90%;" | {| style="font-size:90%;" | ||
|- | |- | ||
− | | [[image:icon_implant_hardwiring.png|24px]] | + | | [[image:icon_implant_hardwiring.png|24px]] {{co|coral|'''Inherent Implants 'Squire' Engineering EG-603'''}} ''(slot 6, increases your powergrid)'' |
|- | |- | ||
− | | [[image:icon_implant_hardwiring.png|24px]] | + | | [[image:icon_implant_hardwiring.png|24px]] {{co|coral|'''Zainou 'Gypsy' Electronics EE-603'''}} ''(slot 6, increases your CPU)'' |
|- | |- | ||
− | | [[image:icon_implant_hardwiring.png|24px]] | + | | [[image:icon_implant_hardwiring.png|24px]] {{co|coral|'''Eifyr and Co. 'Rogue' Acceleration Control AC-603 '''}} ''(slot 6, increases your AB/MWD speed increase)'' |
|} | |} | ||
For slot 8 there's very few implants that help with incursions: | For slot 8 there's very few implants that help with incursions: | ||
{| style="font-size:90%;" | {| style="font-size:90%;" | ||
|- | |- | ||
− | | [[image:icon_implant_hardwiring.png|24px]] | + | | [[image:icon_implant_hardwiring.png|24px]] {{co|coral|'''Zainou 'Gypsy' Long Range Targeting LT-803'''}} ''(slot 8, increases locking range)'' |
|} | |} | ||
Line 505: | Line 654: | ||
{| style="font-size:90%;" | {| style="font-size:90%;" | ||
|- | |- | ||
− | | [[image:icon_implant_mindlink_faction.png|24px]] | + | | [[image:icon_implant_mindlink_faction.png|24px]] {{co|coral|'''Republic Fleet Warfare Mindlink'''}} ''(slot 10, +15% shield hp, +15% agility and +25% bonus to siege/skirmish command bonus)'' |
+ | |- | ||
+ | | [[image:icon_implant_mindlink_faction.png|24px]] {{co|coral|'''Imperial Navy Warfare Mindlink'''}} ''(slot 10, +15% armour hp, +15% targeting range and +25% bonus to armour/information command bonus)'' | ||
+ | |} | ||
+ | |||
+ | == Ascendancy implants == | ||
+ | Some of the public communities have warp speed doctrines, capitalizing on reducing the time it takes the fleet to move between sites. They often use one or more of these implants along with hyperspatial rigs and accelerators to achieve higher overall warp speeds for their fleets. This is very expensive and only works if everyone in fleet augments their warp speed. | ||
+ | {| style="font-size:90%;" | ||
+ | |- | ||
+ | | [[image:icon_implant_hardwiring.png|24px]] {{co|coral|'''High-grade Ascendancy Alpha'''}} ''(slot 1, warp speed and perception +4)'' | ||
+ | |- | ||
+ | | [[image:icon_implant_hardwiring.png|24px]] {{co|coral|'''High-grade Ascendancy Beta'''}} ''(slot 2, warp speed and memory)'' | ||
+ | |- | ||
+ | | [[image:icon_implant_hardwiring.png|24px]] {{co|coral|'''High-grade Ascendancy Gamma'''}} ''(slot 3, warp speed and willpower)'' | ||
+ | |- | ||
+ | | [[image:icon_implant_hardwiring.png|24px]] {{co|coral|'''High-grade Ascendancy Delta'''}} ''(slot 4, warp speed and intelligence)'' | ||
|- | |- | ||
− | | [[image: | + | | [[image:icon_implant_hardwiring.png|24px]] {{co|coral|'''High-grade Ascendancy Epsilon'''}} ''(slot 5, warp speed and charisma)'' |
+ | |- | ||
+ | | [[image:icon_implant_hardwiring.png|24px]] {{co|coral|'''High-grade Ascendancy Omega'''}} ''(slot 6, warp speed set bonus)''<small> <ref>A cheaper alternative is the {{co|coral|'''Eifyr and Co. 'Rogue' Warp Drive Speed WS-618'''}} implant, which is almost as good.</ref></small> | ||
|} | |} | ||
+ | <small><references/></small> |
Revision as of 01:45, 21 June 2015
Incursion links |
---|
General |
Advanced |
EVE University |
Preparations |
Fittings |
Guides |
Fitting principles
Incursion fleets rely on good resists and buffer supported by a logistics. There are simply too many enemies to be able to fit a strong enough local tank, not to mention that by sacrificing a small portion of your fleet to bring in logistics instead of more damage dealers, the rest of the damage dealers can fit more offensive modules and your fleet will perform better.
Once you have a good enough tank, the rest of your spare slots should be used to augment your damage potential. While there's such a thing as under-tanked, being over-tanked is not only wasteful in incursions but even dangerous if done at the cost of offence.
See Preparing for Incursions for more information about what skills are needed.
Omni damage and resists
The Sansha incursion rats deal damage in two ways, lasers (EM and thermal) and torpedoes (kinetic and explosive). As such, they hit across all four resist types. While you can sometimes compensate for a low kinetic resist by having a higher explosive resist, or get away with lower resists due to having a small signature and high speed, generally you don't have the luxury of having resist holes in incursions.
Just as they do damage across the board, the Sansha incursion rats have omni tanks as well. The only notable exception is the Lirsautton Parichaya, it's a little weaker against thermal damage and stronger against explosive damage. So contrary to missions where Amarr and Gallente weapons are somewhat limited due to their set damage types, these weapons are not hampered by resists in incursions.
You can find out more statistics about the Sansha incursion rats on the Sansha's Manual page.
Applied DPS
One of the most important aspects to realize is that whatever DPS (damage per second) your favourite third party fitting tool tells you that you have, or whatever the fitting window ingame tells you, is worth nothing if you cannot apply that damage. Hence the term "applied DPS" as opposed to "paper DPS" which is basically just your potential damage.
Your velocity, your target's velocity, approach vectors, your gun's signature resolution, your target's ship signature, locking speed, locking range, your weapon's optimal and falloff range and tracking all play a vital part in how much of your damage you'll be able to apply on your enemy. See turret damage or the gunnery guide for a more comprehensive introduction to the factors determining how much damage you'll end up doing when you undock and leave your theoretical bubble. Practically this means that utility modules often make or break fleets.
We always use faction ammunition in incursions for the added damage compared to regular tech one ammunition. Certain tech two ammunition is used for specific ships or roles, like Null L for blaster boats or Scorch L for pulse lasers, but most of the time you'll be using faction ammunition since it does not suffer the tracking or range penalties most short range tech two ammunitions do.
Utility modules
Utility modules refer to modules you fit that doesn't directly give you a higher dps in your favourite third party fitting program or on your fitting screen ingame. Instead they act as force multipliers of sorts making up for weaknesses or capitalize on strengths for increased efficiency. There are also modules that has no impact on your offensive capabilities, but are invaluable when things go wrong.
For vanguards we make sure we have at least one sensor booster and one web. If we have room for more midslots we primarily go for a second web first before looking into other modules. For assaults and up, once you've ensured that you have the locking range needed (potentially requires you to use a sensor booster) and fitted any required propulsion modules. For utility highslots, pick the most important one. So a capacitor transmitter if you run with Basilisks or need a cap chain and a remote shield booster if you run with Scimitars or have no need for a cap chain. Should you have the luxury of having more than one utility highslot, just bring both. If you have no use for either or lack the powergrid to fit them you could use an auto targeter for more locks, drone link augmentor for longer drone control range etc.
Supporting short or long range setups
The priority for certain utility modules change depending on your setup. If you're fighting mostly within web range, webs themselves end up giving you far more applied damage than tracking computers do. On top of that, they benefit everyone who's shooting that target and not just you. But if you're engaging primarily at range, outside web range, a web is utterly useless and you benefit more from a target painter or local tracking computers to improve your damage application. While sensor boosters are critical in vanguards, they are less important in assaults and headquarters.
Below are some examples of how you could change your midslots depending on your fleet composition for vanguards.
Short range | Long range | ||
---|---|---|---|
Flexible [1] | Dedicated webber [2] | Flexible [3] | Alpha doctrine [4] |
Sensor Booster II Federation Navy Stasis Webifier Federation Navy Stasis Webifier Tracking Computer II |
Sensor Booster II Federation Navy Stasis Webifier Federation Navy Stasis Webifier Federation Navy Stasis Webifier |
Sensor Booster II Federation Navy Stasis Webifier Phased Weapon Navigation Array ... Tracking Computer II |
Sensor Booster II Sensor Booster II Tracking Computer II Tracking Computer II |
- ^ If your fleet has a decent amount of webs already, a tracking computer to increase your tracking or extend your range will benefit you more than adding another web.
- ^ If you're one of the few with webs, use as many as possible to capitalize on your role.
- ^ In fleets where you're shooting targets both at range and within web range, a mix might be beneficial if you don't have dedicated webbers.
- ^ In a setup where you rely on shooting things where they spawn, you need both the tracking and range as well as the ability to quickly lock targets up. In competitions the faster lock time is also advantageous.
When in doubt, just follow the recommended fits on the Vanguard and Assault fitting pages or ask your fleet commander for advice. See Anatomy of Incursions for more information on how you can change these modules around for different tactics based on your fleet composition.
Drones
Drones can be a tremendous asset, if you pick the right ones and use them intelligently. The sum of all the drones in fleet can easily amount to the equivalent of adding an extra pilot or two on grid, so it's not something to treat lightly. See utilizing drones for more information on how to make the most of drones.
When selecting drones you need to factor in how to get the best mix of microwarpdrive and orbital speeds, tracking and optimal range for the type of fleet and sites you run. Amarr drones generally provide the best mix for most situations except for headquarter sites. Below are the drones we recommend within our community.
Recommended drones/site | Light drones | Medium drones | Heavy drones | Sentry drones |
---|---|---|---|---|
Vanguard sites | Acolyte II | Not recommended | Not recommended | Garde II [1] |
Assault sites | Acolyte II | Infiltrator II | Not recommended | Curator II [2] |
Headquarter sites [3] | Hobgoblin II | Hammerhead II | Ogre II [4] | Not recommended |
- ^ (Situational) Unbonused sentries have considerably lower tracking and needs to operate at range or stay on cruisers..
- ^ (Situational) In order to use Curator II drones you need to remain stationary more often than not. The extra range of curators is needed for the 35 - 65 km engagement range.
- ^ Drones are often put on stationary objects in headquarter sites, thus focus shifts from Amarr drones (speed and application) to Gallente drones (maximum damage).
- ^ If cost isn't an issue, Gecko or 'Augmented' Ogre drones are preferred due to increased speed and better damage application.
Rigging choice
It's very easy to dismiss the importance of the rig selection when buying a new ship. While it's usually not something a new pilot needs to worry about when getting any of the minimum fits posted on the wiki, it's extremely important for people looking to get a new ship as it heavily influences your options in terms of flexibility and utility slots (which is everything in incursions). Don't spend too much ISK on a temporary setup, either go for a cheap "good enough" setup while you're saving up for your ideal setup, or just wait until you can afford the whole setup you want in the end.
Electromagnetic or thermal rig
In general the electromagnetic rig will free up more midslots, but tends to require fancier deadspace modules to compensate for the overall lower resists. The thermal rig gives you a stronger and more flexible tank without having to rely on the high-end deadspace modules, at the cost of not being able to free up as many midslots.
Defence or offence
Going for offence means that you're limited to a single tech one resist rig in combination to your burst rig, due to the high calibration cost of the tech two damage rig. Choosing a more defensive setup will allow you to fit a tech two resist rig as well as making full use of the other two rigs. The offensive rigs are usually much cheaper than the defensive ones, but since the offensive setup usually has to up the quality of their deadspace modules to get a comparable resist profile, they're often forced to use higher tiered deadspace mods.
Flexibility vs efficiency vs cost
Given the different needs for tank and utility modules between the different type of sites, most incursion communities go for the most efficient rig setup for the kind of sites they are running. A community running vanguards exclusively often have different setups than those who run headquarters only. Communities that push for high-end fits with expensive deadspace modules usually have different rig selections too, since those stronger modules opens up for a few more options.
Going for the most efficient setup is of course always going to be the strongest way to do it, but sometimes you have to be practical. In our case, within our community, we factor in flexibility and cost a lot more. We want our members to be able to use the same ship for any type of site without having to resort to spending billions on faction and deadspace modules. That doesn't stop people who want to from doing it, but it does mean that some of our recommended fits will differ quite a lot from that of public communities.
Faction and deadspace upgrades
There are many ways to use faction and deadspace modules to vastly improve the efficiency of your incursion ship. Some of these modules are cheap and might not be too much of a concern or downright required (like the Federation Navy Stasis Webifier), but others are worth quite a bit of ISK and a second thought is warranted if you consider getting them. The cost of improving your efficiency rises exponentially as well, so while the first round of upgrades might be very cost-efficient, taking it one step further will quickly put you in a position where you're literally throwing ISK away for minor improvements.
Consider the actual benefit you will get from upgrading a certain module. Getting a deadspace hardener is useful for most ships as it frees up a midslot and potentially a lowslot as well. But a faction tracking computer or a sensor booster might make sense for public fleets built to compete, but for our community that is hardly a worthwhile investment.
What do you get in return?
To put this into perspective you need to factor in stacking penalties. If you're just using one module to a given effect, it's easy to calculate and see the difference, but when you have more intricate combinations where things end up 2nd, 3rd, 4th or 5th in the stacking hierarchy, it might be a little harder to see what you get out of it.
Worthwhile investments
Here's a list of some modules that are worth upgrading. While some give a larger effect, they all contribute enough to warrant their cost. That said, just because the A-type is very efficient doesn't mean everyone should get one, as you can often get by with a B- or even a C-type for certain fits.
Module | Benefit |
---|---|
1 x Pithum C-Type Adaptive Invulnerability Field is 35,42% stronger than an Adaptive Invulnerability Field II (top of the hierarchy [1]) 1 x Pithum B-Type Adaptive Invulnerability Field is 45,83% stronger than an Adaptive Invulnerability Field II (top of the hierarchy [1]) 1 x Pithum A-Type Adaptive Invulnerability Field is 46,875% stronger than an Adaptive Invulnerability Field II (top of the hierarchy [1]) | |
1 x Federation Navy Tracking Computer is 3,85% stronger than a Tracking Computer II. 2 x Federation Navy Tracking Computers are 7,43% stronger (top of the hierarchy [1]). 2 x Federation Navy Tracking Computers are 5,97% stronger (if you get a link [2]). | |
1 x Serpentis Sensor Booster is 3,12% stronger than a Sensor Booster II. 2 x Serpentis Sensor Boosters are 6,07% stronger (top of the hierarchy [1]). 2 x Serpentis Sensor Boosters are 5,04% stronger (if you get a resebo [2]). | |
1 x Federation Navy Magnetic Field Stabilizer is 2,27% more effective compared to Magnetic Field Stabilizer II. 4 x Federation Navy Magnetic Field Stabilizers are 6,45% stronger (top of the hierarchy [1]). 4 x Federation Navy Magnetic Field Stabilizers are 4,36% stronger (if you have a T2 burst rig) [2]). |
- ^ a b c d e f The modules are on the top, meaning the first module gets 100% effect, second 86,9%, third 57,1% all according to normal stacking penalty rules.
- ^ a b c Remote tracking computers, remote sensor boosters and tech two burst rigs are stronger and thus pushes the modules down to 2nd and 3rd (etc) in the hierarchy, meaning they are both penalized and working at 86,9% and 57,1% respectively (or more if you stack more modules).
Questionable investments
These modules fall into the category of "more ISK than sense", as they give very little or in some cases no actual improvement.
Module | Benefit |
---|---|
1 x Republic Fleet Tracking Enhancer is only 0,46% stronger than a Tracking Enhancer II. 2 x Republic Fleet Tracking Enhancers are only 0,67% stronger (2nd and 3rd in the hierarchy [1]). 2 x Republic Fleet Tracking Enhancers are only 0,41% stronger (3rd and 4th in the hierarchy) [1]). |
- ^ a b Tracking Computer, both local and remote ones from scimitars, that are scripted for tracking are stronger than the tracking bonus from tracking enhancers. So if you have a tracking computer, or two, or an incoming link, the small bonus will be 2nd and 3rd, 3rd and 4th or even 5th and 6nd (suffering harsh stacking penalties).
Determining a proper tank
There are a few easy ways to determine whether a tank is ok or not. Below are some key aspects that help when you're testing your ship in your favourite third-party fitting tool or if you've taken on the role of waitlist manager and need to quickly gauge whether the fit someone x up with is ok or not.
Resist holes
A lot of ships share a standard resist profile, so they share the same resist holes and have the same issues and weaknesses. Understanding what innate weaknesses a ship has is key to knowing how to best raise it to the desired high average resists mentioned above.
Below is a list of different resist profiles for various ship classes as well as a few specific ships with deviating profiles. The last column lists the obvious weaknesses of the class/hull, which will help you determine how to best achieve the desired resist profile. Plugging a hole is usually a simple matter of adding a resist rig or a combination of a rig and a shield amplifier, then up the resists in general by using one or two invulnerability fields.
Ship | Base resist profile | Comments |
---|---|---|
Regular/faction battleships [1] | 0%20%40%50% | An EM hole and a weak thermal resist. |
Resist bonused battleships [2] | 20%36%52%60% | Weak EM and thermal resists, but no resist holes. |
Scimitar | 75%60%40%50% | No resist holes. |
Basilisk | 0%80%70%50% | An EM hole. |
Effective shield hit points
You can judge your tank by many means, but for Incursions the best way to measure your tank is to look at effective shield hit points (ESHP), as opposed to damage per second repaired (DPS-tank) or the generic effective hit points (EHP). This is because a lot of ships have significant armour and hull hit points, so the effective hit points value can be quite misleading on a battleship with a damage control for example, as the EHP-value skyrockets compared to a ship without a damage control fitted, but very little of it applies to the actual ESHP. You also need to factor in things like speed and signature, because a smaller ship that is orbiting will be a lot harder to hit than a large, stationary ship. So don't casually compare a ship's effective shield hit points against another without taking that into your consideration.
Shield hit points and resists
While the above mentioned effective shield hit points is a good measure, it is not always practical to use on the fly. For one it doesn't really tell you if the ship has any glaring resist holes, so for practical reasons we tend to speak in more general terms -- Shield hit points and resists. It's much easier to just ask the pilot "How many raw shield hit points do you have?" and "What are your resists if you undock and turn on all your modules?". It's very easy for people to check this ingame and it tells us enough to judge whether or not the fit is ok.
Guidelines
Below are some rough guidelines for what a proper tank might be for a battleship (there isn't much variation to speak of for logistics). Since we focus mainly on low skilled, kitchen sink setups we're going with a relatively high recommended level for our community. The values below are of raw shield hit points and paired average resists (EM/thermal and kinetic/explosive), values before boosts for easy comparison.
Vanguards (33k+ effective shield hit points) 70% resists and at least 10,000 raw shield hit points. | |
Assaults (40k+ effective shield hit points) 70% resists and at least 12,000 raw shield hit points. | |
Headquarters (52k+ effective shield hit points + 100k effective hit points in total) 73% resists and at least 14,000 raw shield hit points. |
Naturally lower shield hit points is doable if you adjust your resists accordingly. In vanguards and assaults it's also possible to drop a little lower in really good fleets. Just remember that resists are far more important than raw shield hit points, as higher resists has the secondary benefit of increasing the efficiency of remote repairs. Below is a graph illustrating how damage changes with scaling resists.
Resists | Actual damage taken | |
---|---|---|
61% resists | 30% more damage (39% damage taken) | |
64% resists | 20% more damage (36% damage taken) | |
67% resists | 10% more damage (33% damage taken) | |
70% resists | Baseline damage (30% damage taken) | |
73% resists | 10% less damage (27% damage taken) | |
76% resists | 20% less damage (24% damage taken) | |
79% resists | 30% less damage (21% damage taken) |
Stacking penalties and offgrid boosts
A ship with fewer modules or rigs stacking will also benefit more from boosts, thus not suffering quite as much as they might initially seem to. This of course means they also have more to lose if boosts go down, which is worth noting.
Further down this page you'll see examples of this with the advanced setups, if you pay attention to the normal resist profiles vs the resist profile with offgrid boosts. The EM-rig setup for vanguards for example has a deceptively low EM/thermal resist, averaging around 62% instead of the recommended 70%. This would suggest nearly +30% more damage taken from turret damage, as your resists are almost 9% lower (see the graph above). But due to less stacking penalties that setup ends up having roughly 69% average EM/thermal resists after boosts which is fairly close to the 72% of our recommended fits and will eventually only take +10% more damage from turrets, while taking torpedoes just fine.
Battleship setups
Below are some examples of tank setups for battleships, both the setups we use for our minimum fits as well as some advanced ones for high-end ships.
In order to highlight the transition of each type of fit from vanguards to headquarters, each setup will not only show the vanguard fit in question, but also how it works if you take off some tank as well as what's needed to make that setup work for assaults and headquarters.
Minimum setup
This is the minimum skill setup that we use within our community. It is designed to cheap and flexible enough to be useful in a variety of different sites. For assaults and headquarters, we often use a Large Shield Extender II to ensure that everyone has enough buffer, even with the minimum skills we require.
This assumes our minimum skills so the EM resist can be up to 2% higher with EM Shield Compensation V instead of III.
Slots | Vanguard (less tank) [1] | Vanguard | Assault | Headquarter |
---|---|---|---|---|
Freed up mid slot Adaptive Invulnerability Field II Adaptive Invulnerability Field II EM Ward Amplifier II |
Freed up mid slot Adaptive Invulnerability Field II Adaptive Invulnerability Field II EM Ward Amplifier II |
Large Shield Extender II Adaptive Invulnerability Field II Adaptive Invulnerability Field II EM Ward Amplifier II |
Large Shield Extender II Adaptive Invulnerability Field II Adaptive Invulnerability Field II Pithum C-Type EM Ward Amplifier [2] | |
Freed up low slot | Damage Control II | Damage Control II | Damage Control II | |
Anti-Thermal Screen Reinforcer I | Anti-Thermal Screen Reinforcer I | Anti-Thermal Screen Reinforcer I | Anti-Thermal Screen Reinforcer II [2] | |
65,2%65,7%69,0%74,1% | 69,5%70,0%72,8%77,4% | 69,5%70,0%72,8%77,4% | 71,9%72,1%72,8%77,4% | |
67,7%68,2%73,5%77,9% | 71,7%72,2%76,8%80,7% | 71,7%72,2%76,8%80,7% | 73,9%74,2%76,8%80,7% |
Resist bonused ships
Ships like the Rokh with resist bonuses can fit slightly different due to their higher base resistances.
This assumes our minimum skills so the various resist can be up to 3% higher with Caldari Battleship V instead of III and in the case of the headquarter fit with the EM amplifier, additional EM resist can be gained by training EM Shield Compensation V.
Slots | Vanguard (less tank) [1] | Vanguard | Assault | Headquarter |
---|---|---|---|---|
Adaptive Invulnerability Field II Adaptive Invulnerability Field II Freed up mid slot |
Adaptive Invulnerability Field II Adaptive Invulnerability Field II Freed up mid slot |
Adaptive Invulnerability Field II Adaptive Invulnerability Field II Freed up mid slot |
Adaptive Invulnerability Field II Adaptive Invulnerability Field II EM Ward Amplifier II | |
Freed up low slot | Damage Control II | Damage Control II | Damage Control II | |
Anti-Thermal Screen Reinforcer I Anti-EM Screen Reinforcer I |
Anti-Thermal Screen Reinforcer I Anti-EM Screen Reinforcer I |
Anti-Thermal Screen Reinforcer I Anti-EM Screen Reinforcer I |
Anti-Thermal Screen Reinforcer I Anti-EM Screen Reinforcer I | |
62,3%69,8%72,7%77,2% | 67,0%73,6%76,1%80,1% | 67,0%73,6%76,1%80,1% | 75,4%73,6%76,1%80,1% | |
65,0%72,0%76,7%80,6% | 69,4%75,5%79,6%83,0% | 69,4%75,5%79,6%83,0% | 76,1%75,5%79,6%83,0% |
- ^ In a good fleet with excellent damage projection, with an experienced fleet commander and seasoned logistics, you can usually remove the damage control in favour of more damage mods.
Ships like the Apocalypse Navy Issue and the Megathron Navy Issue with only four midslots aren't recommended for incursions, mostly due to their lack of midslots but also due to being armour based and suffering from fairly low shield hit points (and in the case of the apocalypse serious capacitor issues) which just compounds the issues of these ships. Within certain limits they can still do reasonably well in vanguards and assaults, but they are unable to do headquarter sites both from an efficiency point of view as well as due to their weak tank.
Navy and Fleet Issue ships have higher rig calibration points than other ships (400 points instead of the regular 350 points).
Slots | Vanguard (less tank) [1] | Vanguard | Assault (less tank) [2] |
---|---|---|---|
Adaptive Invulnerability Field II Adaptive Invulnerability Field II Freed up mid slot |
Adaptive Invulnerability Field II Adaptive Invulnerability Field II Freed up mid slot |
Adaptive Invulnerability Field II Adaptive Invulnerability Field II Large Shield Extender II [3] | |
Freed up low slot | Damage Control II | Damage Control II | |
Anti-Thermal Screen Reinforcer I Anti-EM Screen Reinforcer II |
Anti-Thermal Screen Reinforcer I Anti-EM Screen Reinforcer II |
Anti-Thermal Screen Reinforcer I Anti-EM Screen Reinforcer II | |
60,2%65,7%69,0%74,1% | 65,2%70,0%72,8%77,4% | 65,2%70,0%72,8%77,4% | |
63,1%68,2%73,5%77,9% | 67,7%72,2%76,8%80,7% | 67,7%72,2%76,8%80,7% |
- ^ In a good fleet with excellent damage projection, with an experienced fleet commander and seasoned logistics, you can usually remove the damage control in favour of more damage mods.
- ^ This setup is considerably weaker than your average assault setup, even with the extra shield extender. Its considerably weaker resists means repairs are less effective.
- ^ The Large Shield Extender II module is often needed in assaults for armour tanked ships to compensate for lower innate shield hit points.
Advanced fits
While there are several ways to fit high-end ships for incursions, here are some frequently used variants.
Calibration
Due to the limit of calibration points, there are several combinations available. Here are some common ones.
Slots | Offensive | Defensive | Warp speed |
---|---|---|---|
Anti-EM Screen Reinforcer I Large Hybrid Burst Aerator II [1] |
Anti-Thermal Screen Reinforcer II Spare rig slot Spare rig slot |
Anti-EM Screen Reinforcer II Large Hyperspatial Velocity Optimizer II Spare rig slot | |
SUM | 350/350 (0 points left) | 75/350 (275 points left) | 150/350 (200 points left) |
- ^ This should of course be a Energy Burst Aerator II for laser weapons and a Projectile Burst Aerator II for projectile weapons.
Filling up the spare rig slots is a matter of figuring out what rig benefits you the most, based on the type of fleet compositions you run, what kind of ship you fly and if a rig can in some way help you free up a low- or midslot. If you need more range use a Locus Coordinator II rig (150 points), if you need more shield hit points use a Core Defense Field Extender II rig (75 points) and if you need more cap use either a Capacitor Control Circuit II rig (150 points) or a Discharge Elutriation II rig (150 points).
Just remember that any offensive rig you fit on your ship needs to be tech two, otherwise it'll end up at the end of stacking penalties and that will render it completely useless.
Thermal rig
The thermal rig setup is primarily a more defensive setup, used for even resists with the ability to really push the resists up. The downside of this setup is that you're forced to use two midslots and cannot drop down to one midslot for vanguards. Depending on what other rigs you use, you'll have enough calibration points to upgrade to a tech two anti-thermal rig further increasing your tank.
This assumes our minimum skills so the EM resist can be up to 2% higher with EM Shield Compensation V instead of III.
Slots | Vanguard | Assault | Headquarter | Headquarter (alternative) [1] |
---|---|---|---|---|
Freed up mid slot Pithum C-Type Adaptive Invuln ... Pithum C-Type EM Ward Amplifier |
Freed up mid slot Pithum C-Type Adaptive Invuln ... Pithum C-Type EM Ward Amplifier |
Adaptive Invulnerability Field II Pithum C-Type Adaptive Invuln ... Pithum C-Type EM Ward Amplifier |
Freed up mid slot Pithum A-Type Adaptive Invuln ... [2] Pithum A-Type EM Ward Amplifier [2] | |
Freed up low slot | Damage Control II | Damage Control II | Damage Control II | |
Anti-Thermal Screen Reinforcer I | Anti-Thermal Screen Reinforcer I | Anti-Thermal Screen Reinforcer I | Anti-Thermal Screen Reinforcer I | |
66,0%66,9%64,4%70,3% | 70,3%69,3%68,8%74,0% | 75,4%74,5%77,0%80,8% | 75,0%72,5%72,1%76,8% | |
71,0%71,8%72,4%77,0% | 74,7%73,8%75,8%79,9% | 77,2%76,4%80,4%83,6% | 78,7%76,6%78,4%82,0% |
- ^ This alternative is only suitable for ships with a high native shield hit point count like the Nightmare, since it can't really push resists higher without using additional slots (at which point the other option is cheaper and more flexible). This setup also loses the ability to stagger two invulns in order to keep at least one of them up at all times even when neuted out. With just one invuln it is more susceptible to neuts.
- ^ a b This is a necessary upgrade in order to get enough resists with just one invulnerability field for headquarter sites.
Electromagnetic rig
The EM rig setup is primarily used to free up as many slots are possible, but requires you to spend considerably more ISK on deadspace hardeners and will still have considerably lower resists for vanguards.
Slots | Vanguard (much less tank) [1] | Vanguard [2] | Assault | Headquarter |
---|---|---|---|---|
Freed up mid slot Freed up mid slot Pithum B-Type Adaptive Invuln ... |
Freed up mid slot Freed up mid slot Pithum B-Type Adaptive Invuln ... |
Freed up mid slot Adaptive Invulnerability Field II Pithum B-Type Adaptive Invuln ... |
Freed up mid slot Pithum B-Type Adaptive Invuln ... [3] Pithum B-Type Adaptive Invuln ... | |
Freed up low slot | Damage Control II | Damage Control II | Damage Control II | |
Anti-EM Screen Reinforcer I | Anti-EM Screen Reinforcer I | Anti-EM Screen Reinforcer I | Anti-EM Screen Reinforcer I | |
58,4%55,0%66,3%71,9% | 63,6%60,6%70,5%75,4% | 69,8%70,9%78,2%81,8% | 74,7%75,6%81,7%84,7% | |
64,6%65,1%73,8%78,2% | 69,0%69,5%77,1%80,9% | 72,1%75,2%81,4%84,5% | 76,6%79,2%84,4%87,0% |
- ^ In a really good fleet with excellent damage projection, with an experienced fleet commander and seasoned logistics, you can usually remove the damage control in favour of more damage mods.
- ^ This setup is considerably weaker than your average vanguard setup and relies heavily on higher applied damage to mitigate incoming damage by killing them before they get into optimal range.
- ^ This is a necessary upgrade in order to get your EM and thermal resists up to an acceptable level for headquarter sites, especially if you run with less than recommended shield hit points.
Strategic cruisers and command ships
While a lot of communities avoid strategic cruisers and command ships due to the fact that their damage output cannot match that of pirate faction battleships, we still allow them as they can easily match the efficiency of tech one battleships. As such, we welcome properly fit strategic cruisers and command ships in our community, as they are good enough for our purposes and we don't benefit from alienating people who prefer to fly smaller ships.
Just be sure to inform people that if they have plans to fly with public communities, they will most likely need to train into a proper battleship.
Different resist profiles
One of the biggest differences fitting strategic cruisers and command ships compared to battleships is that they have a different resist profile. They are also much smaller in signature, especially the strategic cruisers, so won't need the same raw buffer of shield hit points either. As such, the solution could range from anything between a thermal and EM hardener for the Legion to a mere anti-EM rig on the Tengu or an invulnerability field for the Sleipnir.
Ship | Base resist profile | Comments |
---|---|---|
Astarte / Proteus | 0%60%85%50% | An EM hole. |
Legion | 0%20%70%87,5% | An EM hole and weak thermal resists. |
Loki [1] | 80%60%52%60% | No resist holes. |
Sleipnir | 75%60%40%50% | No resist holes. |
Tengu [1] | 20%84%76%60% | Weak EM resists. |
Vulture | 0%80%70%50% | An EM hole. |
Recommended implants
There are plenty of implants that are useful for incursion runners, with effects ranging from damage projection (tracking, damage or rate of fire) to fitting/support related effects (increased capacitor, powergrid or CPU).
While one shouldn't run around with a head full of expensive implants during war, there are some rather cheap +3% implants you could use even while at war. A set of 4% implants from the CONCORD Loyalty Point store might also be worth considering, they go for 37,5M ISK and 37,5k CONCORD LP each. When the cost of your clone isn't an issue there are +6% implant variants of these implants that greatly increase your efficiency, but costs 250M ISK and 250k CONCORD LP each and requires Cybernetics V.
Gunnery implants
There are several implants improving damage, rate of fire, tracking. Below are implants that help you regardless which ship you fly as they benefit all turret ships.
Eifyr and Co. 'Gunslinger' Motion Prediction MR-703 (slot 7, +3% turret tracking speed) [1] |
Inherent Implants 'Lancer' Gunnery RF-903 (slot 9, +3% rate of fire) [2] |
Eifyr and Co. 'Gunslinger' Surgical Strike SS-903 (slot 9, +3% turret damage) |
For Battleships and large guns, the next implant is split across each racial weapon system.
Eifyr and Co. 'Gunslinger' Large Projectile Turret LP-1003 (slot 10, +3% to large projectile weapons) |
Inherent Implants 'Lancer' Large Energy Turret LE-1003 (slot 10, +3% to large energy weapons) [3] |
Zainou 'Deadeye' Large Hybrid Turret LH-1003 (slot 10, +3% to large hybrid weapons) |
For those flying strategic cruisers as their preferred ships, there's an implant for slot 8. [4]
Eifyr and Co. 'Gunslinger' Medium Projectile Turret MP-803 (slot 8, +3% to medium projectiles) |
Inherent Implants 'Lancer' Medium Energy Turret ME-803 (slot 8, +3% to medium energy weapons) |
- ^ For the high-end tracking speed implants, the Ogdin's Eye Coordination Enhancer implant is often much cheaper than the 6% implant from CONCORD. It only requires Cybernetics III.
- ^ For the high-end rate of fire implants there's the Pashan's Turret Customization Mindlink implant that gives +7% rate of fire for all turrets, but it is a very expensive implant. It only requires Cybernetics IV.
- ^ For the high-end laser implants there's the Pashan's Turret Handling Mindlink which gives +7% damage to large energy weapons, but it's also a very expensive implant. It only requires Cybernetics IV.
- ^ Note that the 5% versions of these three implants are disproportionately cheap, often running somewhat below the price for the 3% versions.
Genolution implants
For people without +4 or +5 attribute implants, the Genolution implants can be quite useful.
Genolution Core Augmentation CA-1 (slot 1, increases powergrid and capacitor) |
Genolution Core Augmentation CA-2 (slot 4, increases CPU and capacitor) |
Genolution Core Augmentation CA-3 (slot 3, increases velocity and shield capacity) |
Genolution Core Augmentation CA-4 (slot 2, increases agility and armour hit points) |
Capacitor implants
For the less used slots 6 and 8 you haven't got much worthwhile to use in terms of increasing your damage. For those slots you could increase your capacitor if you're flying logistics or a ship with cap-hungry turrets.
Inherent Implants 'Squire' Energy Systems Operation EO-603 (slot 6, decreases capacitor recharge) |
Inherent Implants 'Squire' Energy Management EM-803 (slot 8, increases capacitor capacity) |
Projectile based ships
These ships have no need for capacitor implants in slot 6 and 8, so you could look for other options. Perhaps the most common ones would be the engineering implant to free up more powergrid for artillery or microwarpdrives for the larger sites and locking range.
For slot 6 you got quite a few options of implants:
For slot 8 there's very few implants that help with incursions:
Zainou 'Gypsy' Long Range Targeting LT-803 (slot 8, increases locking range) |
Mindlink implants
For the boosters, slot 10 is taken up by the mindlink implants.
Ascendancy implants
Some of the public communities have warp speed doctrines, capitalizing on reducing the time it takes the fleet to move between sites. They often use one or more of these implants along with hyperspatial rigs and accelerators to achieve higher overall warp speeds for their fleets. This is very expensive and only works if everyone in fleet augments their warp speed.
High-grade Ascendancy Alpha (slot 1, warp speed and perception +4) |
High-grade Ascendancy Beta (slot 2, warp speed and memory) |
High-grade Ascendancy Gamma (slot 3, warp speed and willpower) |
High-grade Ascendancy Delta (slot 4, warp speed and intelligence) |
High-grade Ascendancy Epsilon (slot 5, warp speed and charisma) |
High-grade Ascendancy Omega (slot 6, warp speed set bonus) [1] |
- ^ A cheaper alternative is the Eifyr and Co. 'Rogue' Warp Drive Speed WS-618 implant, which is almost as good.