Planetary Industry at the NSC: Difference between revisions

Line 739:

*Install the correct Schematics for the commodities that you wish to build in each Industrial Facility. Basic Industrial Facilities produce P1 while Advance Industrial Facilities produce P2.

[[image:Nsc pi 10.png]]

*Open up the Extractor Control Unit. What we need to achieve here is a ~~'''~~program output higher than 12,000 Units per hour to achieve maximum efficiency~~'''~~. You longer that you set the Extraction Area Size (This is the amount of time that the planet will run for) the less the per hour output will be. The more Extractor Head Units that you use, the higher the per hour output will be. Do this for both Extractor Control Units, making sure you are extracting the required P0 resource. Play around here, see what works, but generally 4 Extractor Heads and a 1 day Extraction Area Size should be more than enough to achieve maximum efficiency.

*Open up the Extractor Control Unit. What we need to achieve here is a {{co|coral|program output higher than 12,000 Units per hour to achieve maximum efficiency}}. You longer that you set the Extraction Area Size (This is the amount of time that the planet will run for) the less the per hour output will be. The more Extractor Head Units that you use, the higher the per hour output will be. Do this for both Extractor Control Units, making sure you are extracting the required P0 resource. Play around here, see what works, but generally 4 Extractor Heads and a 1 day Extraction Area Size should be more than enough to achieve maximum efficiency in NullSec. Always try to aim for as much as you can per hour though, as this will leave a surplus supply of P0 resources in your Storage Facilities that will allow the planet to continue to produce P2 if you are a couple of hours late to reset it, or just forget entirely.

[[image:Nsc pi 12.png]]

*Now is the tricky bit. We need to create routes to ensure that our products flow correctly between the various Industry Facilities and and up as P2 commodities in our Launchpad. Unfortunately this cannot really be shown with images.

**Route each P0 resource from the Extractor Control Unit to the closest Storage Facility

**Route each P0 from the Storage Facilities to the two Basic Industrial Facility that require that product (You should have already installed the correct Schematics for the Basic Industrial Facilities earlier)

**Route the output P1 material from all Basic Industrial Facilities to the Launchpad

**Route one of each type of P1 material in the Launchpad (You will see four listed if done right, two of each P1) to both Advanced Industrial Facilities

**Route the P2 output from both Advanced Industrial Facilities back to the launch pad

[[image:Nsc pi 13.png]]

@@ Line 739: / Line 739: @@
 *Install the correct Schematics for the commodities that you wish to build in each Industrial Facility. Basic Industrial Facilities produce P1 while Advance Industrial Facilities produce P2.
 [[image:Nsc pi 10.png]]
-*Open up the Extractor Control Unit. What we need to achieve here is a '''program output higher than 12,000 Units per hour to achieve maximum efficiency'''. You longer that you set the Extraction Area Size (This is the amount of time that the planet will run for) the less the per hour output will be. The more Extractor Head Units that you use, the higher the per hour output will be. Do this for both Extractor Control Units, making sure you are extracting the required P0 resource. Play around here, see what works, but generally 4 Extractor Heads and a 1 day Extraction Area Size should be more than enough to achieve maximum efficiency.
+*Open up the Extractor Control Unit. What we need to achieve here is a {{co|coral|program output higher than 12,000 Units per hour to achieve maximum efficiency}}. You longer that you set the Extraction Area Size (This is the amount of time that the planet will run for) the less the per hour output will be. The more Extractor Head Units that you use, the higher the per hour output will be. Do this for both Extractor Control Units, making sure you are extracting the required P0 resource. Play around here, see what works, but generally 4 Extractor Heads and a 1 day Extraction Area Size should be more than enough to achieve maximum efficiency in NullSec. Always try to aim for as much as you can per hour though, as this will leave a surplus supply of P0 resources in your Storage Facilities that will allow the planet to continue to produce P2 if you are a couple of hours late to reset it, or just forget entirely.
 [[image:Nsc pi 12.png]]
+*Now is the tricky bit. We need to create routes to ensure that our products flow correctly between the various Industry Facilities and and up as P2 commodities in our Launchpad. Unfortunately this cannot really be shown with images.
+**Route each P0 resource from the Extractor Control Unit to the closest Storage Facility
+**Route each P0 from the Storage Facilities to the two Basic Industrial Facility that require that product (You should have already installed the correct Schematics for the Basic Industrial Facilities earlier)
+**Route the output P1 material from all Basic Industrial Facilities to the Launchpad
+**Route one of each type of P1 material in the Launchpad (You will see four listed if done right, two of each P1) to both Advanced Industrial Facilities
+**Route the P2 output from both Advanced Industrial Facilities back to the launch pad
+[[image:Nsc pi 13.png]]