EVE UNI Mapper

Pathfinder is a free and open-source wormhole mapping tool. This tools allows groups of players to share mapped wormhole connections, intel and cosmic signature information.

Mapping is important to coordinate campuses' scanning and exploration and is vital for Wormhole Campus to ensure they have full knowledge of nearby wormholes. EVE University hosts a private pathfinder for its members at https://www.pathfinder-w.space/ Pathfinder was introduced in November 2019 as a replacement for our old EVE-Wspace tool.

Accessing the mapper

To view and contribute to the mapper, you need to log in via SSO:

• Go to https://www.pathfinder-w.space/
• Use SSO login and log in with your EVE Online account. The logging in is done through EVE Online servers and is safe.

First thing you will want to do after logging in, is to select your required map. This will usually be your campus map, but you may also have a personal or shared map.

To do this, click the required map at the top of the map screen.

Select your map on the bar.

• LSC = Low Sec Campus Map
• NSC = Null Sec Campus Map
• Solitude = Solitude Campus Map
• HSC = High Sec Campus Map
• WHC = Wormhole Campus Map
• AMC - Amarr Mining Campus Map
  

Reading the map

The map is made of systems and connections in between them. On the map these will show some of their information in compact form, to see full information select the system/connection and look at the panels below th map.

On the system bubble you can quickly see the basic information of that system

Connections will change shape and color depending on their properties.

• Wormhole size limit is indicated by letter on the wormhole. Additionally small and medium wormholes have dashed lines.
• Reduced and critical mass wormholes have yellow and red cores.
• EOL wormholes have purple outlines.
• If signatures are enabled the wormhole will show its connected WH signatures at its ends.

Adding information

The main purpose of the mapper is to share information. To do this you will need to add this information first.

The two main points of interest are signatures and connections. These two are closely linked together.

Adding signatures

First make sure you have the correct system selected.

There are maSignatures can be added one by one or imported in bulk.

To add single signature manually, follow these steps:

• Make sure you have the correct system selected.
• Click the + button in the top right corner of signatures panel.
• Add the Signature ID (the three letters shown in your signatures list. For example, if the ID is RFA-139, you just add RFA).
• Select which type of signature it is.
• Add in the description.
• Press the + button on this row of information.

To quickly bulk import signatures, follow these steps:

• Make sure you have the correct system selected.
• Select a signature in your scan window in-game.
• Select all signatures (CTRL+A)
• Copy the signatures (CTRL+C)
• In path finder paste the signatures (CTRL+V)

This updates those signatures, or adds them if they don't exist.

"Lazy delete" option can be used when you import all the signatures in a system. With lazy delete all old signatures that are not included in your new bulk import will be deleted. This is great for completely refreshing a system and clearing out any old signatures.

There is also a more detailed signature reader. To open it click the clipboard icon at the top right corner of the signatures panel. This works the same way as simply pasting the signatures to pathfinder but with a preview window.

Pre existing signatures can also be edited or deleted in the signatures panel. Simply click the attribute you want to change.

Adding systems and connections

There are multiple different ways to add systems and connections.

If you have tracking enabled in pathfinder the map will automatically add systems to the map as you jump to them. The types of systems can be limited by the map maintainer. If the map scope is set to "all" all connections will be automatically added, if the map scope is set to "wormholes" only wormhole connections are added and if the scope is set to "stargates" only stargate connections are added. If the scope is set to "none" no connections are automatically added.
The pilot tracking has it flaws. Jump cloning, getting podded or just opening a different map may add nonexisting connections to the map.

Tight clicking a system allows you to add a connection to it.

After a system has had another system added to it with a wormhole connection this can be linked to a signature in that system. Simply click the "leads to " attribute on the WH signatuer and select the corresponding system. Setting this will automatically add mass and size limit info on the connection (only if the WH was not k162).

Wormhole connection health can be set by right clicking the wormhole connection. This way you can set the mass criticality and end of lifetime of the connection. EOL connections are automatically deleted 4h 15m after the status is set. The "preserve mass" option is for informing other map users to not waste mass of this wormhole.

Practical example

Here is a practical example on how to add scan data to Pathfinder.

Our You arrive to the system of Octanneve. After making sure you are safe you start to scan the system. First mapper related thing you should do is to check if the mapper contains up to date information on cosmic signatures. If you are lucky all the signatures area already mapped and you don't need to scan at all. To do this select the system in which you are and look at the "Signatures" panel below the map.

Old scan data of the system. You can see the age of the scan information at the right side of the table. In this example it has been 2 days 4 hours since someone scanned the system. You will need to completely re-scan the system.

Start by enabling the "lazy 'delete' signatures" option at top right corner. With this option enabled you can paste new full signature data of the system and all the signatures that are not present anymore will be deleted from pathfinder. Note that this option will automatically disable itself after every scan so you will need to re-enable it every time you need it.

Then open the probe scan window in-game.

Select the probe scanner window, select all signatures with CTRL+A and copy them with CTRL+C.

Pay attention to the filters you use. In normal space information on anomalies is rarely useful and just adds unnecessary noise. So do not include information on anomalies in normal space. But in wormhole space the information on anomalies can be very imporatnt so in there they should be included.

Then just go back to pathfinder window and CTRL+V to add the info on signatures. Now you will easily see if any of the old signatures is still present in system. There is no need to scan those again so you will be able to scan faster by taking advantage on the old scanning information.

Once you have scanned all signatures you can add the scanned data in pathfinder the same way. Select signatures with CTRL+A, copy them with CTRL+C and paste them in pathfinder with CTRL+V.

In this example you find a wormhole in system. You, being a good explorer, will of course map it. Warp to the wormhole.

Once you are on grid with the wormhole you will be able to see the type of the wormhole on your overview. All wormholes have not very useful "k162" on their "out" end and a more useful name on the "in" end.
In this example the "in" end is in this system. Add this information to the pathfinder.
In the signatures panel click the red "unknown" text in the "type" column of the wormhole. Write in the name of the wormhole.
Knowing the type of the wormhole will reveals the ship size limit, mass limit and what kind of system is on the "out" end of the wormhole.

To map the connection you jump through the wormhole. If you have tracking enabled in pathfinder the destination system is added and connected in the map automatically. If the tracking is not enabled you can right click the system you were in and select "add system" to add a system.

Now connect the signature to the wormhole. Click the "leads to" attribute of the wormhole in the signatures panel. The drop down menu will already contain the connected system for you to select. This information is useful later when the signature has gone away. When next person comes and removes the signature that is no more the mapped wormhole connection is also deleted without extra input.

Some mapping schemes may also require you to add a name for the connected wormhole system. This is based on the bookmarking scheme that is used to make it easier to follow bookmark trails without the need to look at the mapper in every system on the path. Double click a system in the mapper to open the dialog where you can add or update the name to include the name from the bookmark (e.g. "2 B1 Aldrat").

Creating maps

In addition to the pre-existing corporation maps you can also host private maps. To create a map just click the "add +" button on top right corner.

Private maps can be shared with limited number of other players.

Shortcuts

• Spacebar + mouse allows dragging the map.
• Holding CTRL allows you to select multiple systems or connections on the map.

Personalizing

You can change certain aspects of how information is presented or handled on the mapper. These settings will only apply to you.

The map setting can be changed by clicking the "map" button on top right corner of pathfinder. This opens side bar with following options:

• Settings - Only available for the map maintainer.
• Grid snapping - Snaps systems into grid when you move them.
• Magnetizing - Causes systems to push at each other to prevent them from overlapping.
• Signatures - Shows signature info of the wormhole connections on map.
• Compact - Hide/show pilot names on the map.

The panels below map can be rearranged by dragged them from their corners.

In addition, the mapper can look up the shortest routes to your favourite locations from a selected system. Use Routes/settings to add and save these connections (see screenshot).