Overview

From EVE University Wiki
Jump to: navigation, search

Template:Uwc


Introduction

The Overview Guide is a step-by-step guide, designed to teach new players how to set up their own overviews in Eve Online.

The guide contains a full walk-through of how to set up a complete overview from start to finish, with the following presets:

  • PvP
  • PvP + Drones
  • PvP Travel
  • PvP Travel without neutrals
  • Missions
  • Mining
  • Looting
  • Pod Saver
  • Wormhole

Setting up your overview is compulsory for uni fleets. It is very important to have your overview set up properly. Your overview presets are your eyes in Eve Online.


Getting Started

What is the overview?

In Eve Online, the overview is the only practical way to organize and view items in space. It is a customizable list of interactive items. It is one of the most important parts of Eve's interface, and will help you in PvP, missions, mining, traveling - practically every activity in Eve requires use of the overview. It is vitally important that you set up your overview in a way that is not confusing, and will allow you to easily see whatever you want to see at any given time. The consequences of not setting up your overview properly could range from not being able to see a war target and subsequently getting destroyed, to firing on your own ally because he appeared as a hostile, to being destroyed by NPC pirates that didn’t even show up on your screen.


Newbie Tips

Hold down the Control key on your keyboard, and left click once with your mouse on an item in your overview to lock it. Holding down the control key will also freeze your overview in place, to prevent items from shuffling around based on the sorting order. This will help prevent you from locking the wrong targets by accident. When you are holding down the control key, all new items that appear on the overview will be added at the bottom of the list, and items that disappear from the grid will be shown in a faded text. Releasing the control key will re-sort your overview automatically.

Double click an item on your overview to approach it.


Organizing your screen layout

Before you even touch the overlay itself, however, you should organize the rest of your interface. Eve is a game of communication and numbers - your screen layout should reflect this.

  1. Undock and find a safe place to sit. You will be sitting out in space for around half an hour. The POS in Aldrat is a good place to do this - ask another player in corp chat if you don’t know where it is. Alternatively, do this on an alternate character on the same account. The changes will carry across to all characters on that account on the same computer. This is required for characters in E-UNI during wartime.
  2. Click the fleet button (on the Neocom panel), then click Form Fleet. Click through the loot logging screen, and you’ll see that you’ve formed a fleet. You may need to reposition and resize the fleet window during fleet ops; sometimes you need it small and out of the way, other times you need to expand it to find pilots in the list.
  3. Make your overview nice and big - it is your main source of information. You could have it running from top to bottom on the right side of my screen, with Selected Item window just above it, and the Drone Bay window just below it.
  4. During a fleet, you’re going to need to have chat windows open. You generally have two windows open at once - fleet chat and squad chat. I like to keep them on the left side of the screen in separate windows.
  5. Another window you should have separated is Local chat. Local is very important in ascertaining who is in system with you. A lot of players like to have it narrowed to the smallest width. You may want to remove portraits from the local chat to make chatter easier to read. The local window is often positioned either running down the left side of the screen between the NeoCom and the chat channels, or just to the right of the chat channels. The more height your local window has, the easier it is to spot potential hostiles in a system.
  6. You should also leave space for your watch list, but you can only get that when you have other people in your fleet.
  7. Press escape and go to the General Settings tab. Under the Windows subheading, check Lock windows when pinned. This will ensure your overview and other windows don’t go anywhere.
  8. Pin your overview and any other windows of your choice. This will allow you to see through them.

Remember that your interface should be set up the way it is most convenient for you - feel free to change your windows around once you work out what you want.

Hint - You can move your ship and modules display to the left and right by holding shift and clicking on your capacitor and dragging. You can even move it to the top of your screen: Click the white arrow below the speedometer, then "Align Top" at the bottom of the menu which appears.

Another hint - You can move your targeted objects around your screen as well. Notice that near the upper-left or upper-right corner of your targeted items (you will have to target something to see these), there is a very faint cross-hair. Click and drag that cross-hair around to change the location of your targets.

Now go to right click the 4-lined box on your Fleet tab and select Leave fleet . Your screen should be mostly set up for the next fleet op. Next time you go on an op, don’t forget to separate your squad and fleet chat windows and to add important fleetmates to your Watch List.

Now that we’ve gotten that down, let’s get onto the overview itself.


The Overview Settings

Viewing Overview Settings

To view all your overview settings, do the following:

  1. Right click on the 4-lined box on your Overview tab.
  2. Click on the third last option, Open overview settings.
The menu selection box for EVE

You should now see your overview settings window, complete with six different tabs.

NOTE - This guide will cover optimizing overview settings in the next chapter. For now, follow along in your own overview and learn.


The Filters Tab

Types

The types tab is where you select what you want to see on your overview. You can use this tab to select specific things - if you’re a veldspar miner, you might only want veldspar asteroids and NPC rats. If you’re a PvPer, you might only want ships on your overview, or maybe even just specific types of ships.

  • Asteroid: Pretty self explanatory - all your different types of asteroids.
  • Celestial: All your large celestial objects - planets, moons, wormholes, and so on. Also contains beacons (cynosural fields), biomass (corpses), stargates and wrecks.
  • Charge: Contains bombs, which can now be deployed by stealth bombers, but only in 0.0 space. These are very dangerous - always good to have them on your overview. It also includes probes, which are usually good to have checked, as having them on overview makes seeing them on d-scan easier.
  • Deployable: Mobile warp disruptors, otherwise known as bubbles. These are the deployable type that get anchored in space. The other type are used by interdictors and heavy interdictors, and don’t show up on your overview.
  • Drone: All your various types of drones. Useful if you want to target drones of any kind, especially fighter drones.
  • Entity: Some of your mission rats (NPC enemies), as well as a few useless things like billboards.
  • NPC: Concord, some npc faction ships, and some rats.
  • Ship: Player-owned ships. Usually you’ll have all of these selected, unless you want to target specific types of ships.
  • Station: Pretty self-explanatory.
  • Structure: POS structures and modules - you might use these if you were attacking one, or living in one.


States

In the States tab, you can further define what you want to see in the overview. Whilst the Types tab is pretty straightforward, some care has to be taken with the States tab.

IMPORTANT: States doesn’t let you say what you want to see, rather it lets you say what you don’t want to see.

If a player has an attribute that you haven’t selected, they won’t show up on your overview.

Example: You want to see a war target, so you select Pilot is at war with your corporation/alliance. You would think this would give you war targets on your overview, but it’s a bit more complicated than that.

Suppose that player also has a bounty on him. Since you haven’t got bounty checked, he won’t show up. You need to select all the attributes that a war target could possibly have in order to see war targets.

Additionally, the States tab and the Types tab interact which often leads to problems and confusion for newer players. For example, if you are setting up a drone preset where all you want to see are drones and nothing else [i.e. no ships, no rats etc.], many newer players will deselect everything in Types except for Drones and then deselect everything in States thinking that those attributes deal only with showing pilots - which is what you don't want in your Drones preset. The problem with this is that you will not see your Drones in the Overview because Drones belong TO pilots; in order to see your own drones, you must select "pilot is in your alliance" in the States tab. If you want to see the drones of your enemies, then you will also have to select "pilot is at war with your corporation/alliance" etc. Feel free to test this out with your own drones, you will be pleasantly surprised. The same principle applies if you're mining with jetcans, if you only select "Cargo Container" under Celestial in Types and deselect everything in States, nobody's cans will show up in your overview because by deselecting everything in States, you are not allowing your Overview to show cans that belong to pilots - and since all cans invariably belong to a pilot, none will thus show. This same principle applies to other objects like wrecks etc. because the States tab doesn't just show pilots, but it shows what those pilots own.

This is the trick to the overview, and (apart from bugs) the most common reason why players can’t see all the things they want to see.


The Appearance Tab

Colortag

Colortags allow you to set which tags appear or do not appear, and which tags have priority. Setting colortags correctly is important because they dictate which state you see. For example, if you have Pilot has a bounty on him set higher than Pilot is at war with your corporation/alliance, you will only see the black skull bounty colortag rather than the red star war target colortag. The consequences of this could obviously be very bad.

Also note that colortag settings also affect chat channels and brackets in space. Colortags can be set to blink.

Another thing to remember is that changing these settings won’t dictate what you can and can’t see in your overview - you will still see all the things you dictated in the States tab. The only thing you’re changing here is how said things are displayed in your overview, in chat and in space.

The outlaw tag will not display for a pilot with -5 or lower security status in the local chat window. A pilot will only show as outlaw in local if he has gained that tag for reasons other than -5 or lower security status; such as a Global Criminal Countdown, or if he is flagged for aggression against yourself, or flagged for theft against your corp.


Background

The Background tab allows you to change the background of items in your overview, as well as the background of icons in space. It doesn’t affect things in chat.

You can change the colour of the background of any pilot state. Generally, as backgrounds are quite distracting, many players keep them unchecked except for outlaws and war targets. In a situation where you want to be able to see neutrals or hostiles very clearly, such as in nullsec or wormhole space, it can be handy to keep all backgrounds checked.

You can also toggle flashing backgrounds. This is where the term “red flashy” comes from - players generally have war targets and outlaws set to a flashing red background. This is useful for highlighting certain pilots in your overview.

Like in the Colortags tab, backgrounds have priorities. If a pilot fulfills two or more criteria, the highest ranked one will take priority.


EWAR

The EWAR lets you modify which electronic warfare notifications are shown on the overview. These notifications show up on the right side of the overview line belonging to the ship (or drone, or POS module, etc.) using the module. These should all be checked.


The Columns Tab

Columns let you select which columns you want to see in your overview. Some of them are pretty useless, so you obviously don’t want those columns cramping your style.

  • Icon: This is the object’s icon, useful for quickly seeing the difference between a stargate and a station, or a war target and a corp member.
  • Distance: The object’s distance from your ship.
  • Name: The name of the object, be it a player name, the name of a station, or the name of a stargate or another item.
  • Type: Shows what type of ship a pilot is flying, which is a very useful thing to know.
  • Tag: The tag that a fleet commander (FC) has assigned to an object. Useful when primary and secondary targets are called, although an FC will usually just shout out the name over Teamspeak. Mostly used for shooting rats, where the FC wants pilots to destroy enemies in a certain order, but doesn’t want to have to call out each target. Also useful for exploration, where cans in archaeology or hacking sites need to be marked as completed.
  • Corporation and Alliance: A pilot’s corporation and alliance.
  • Faction and Militia: Used in Factional Warfare.
  • Size: The object’s size.
  • Velocity: The object’s general velocity. Very useful in PvP to see enemy ship speeds to determine if they are kiting your fleet, or if they've been tackled by scrams and webs to slow them down, etc.
  • Radial Velocity: How fast an object is traveling, and whether it is traveling towards or away from you.
  • Transversal Velocity: How fast an object is traveling perpendicular to you (its orbital velocity). Very useful for gunnery pilots in gauging whether a target can be hit or not, and valuable for frigate and interceptor pilots trying to avoid being hit by guns. An object with a faster transversal velocity will be harder to hit, and vice versa. Angular velocity is, however, more useful. Angular velocity is the most valuable tab for gunnery pilots.
  • Angular Velocity: is an object’s speed relative to you, measured in radians per second. This means that angular velocity takes distance from a target into account, a very important factor when trying to hit something. Even if a ship has a high transversal velocity, it may still have a very low angular velocity because it is far away; meaning it might still be easy to hit. Basically, if the number in the angular velocity tab is lower than your tracking speed, you can hit your target - or the other way around.


The Ships Tab

The Ships tab lets you customize what you see when you mouse over an object in space. It also lets you customize the order information is shown in, and the brackets used on either side of each bit of information. Again, some bits are useful, and some bits are not. Ship Name, for example, is rarely useful, whereas Ship Type is very useful. This information can be useful when you are looking at a battle while zoomed out, if you want to see all pertinent information when you mouse over different ships.


The Misc Tab

The Misc tab allows you to reset all of your overview settings and start from scratch. It also has the option of moving objects that are mentioned in broadcasts to the top of an overview. This can be useful in fleet operations when the FC broadcasts an align command, or the like. The relevant stargate would then move to the top of the overview.


The Overview Tabs Tab

This tab allows you to set up to five different tabs, with five different overview and bracket profile presets. This lets you easily switch between different profiles for different situations. Brackets are the icons you see in space for an item, such as squares for players, circles for planets, etc..


The next section will show you how to set different presets and optimize your overview for different situations.


Setting Up Your Overview

The following section will tell you how to set up your overview for Eve University fleets. Please follow the instructions carefully.


Setting Up Columns

  1. In your overview settings, go to the Columns tab.
  2. Make sure the following boxes are checked and in the following order:
    • Icon
    • Tag (Keep this unchecked unless you need it for special circumstances)
    • Distance
    • Name
    • Type
    • Velocity
    • Corporation
    • Alliance (Corporation and alliance are useful to see who is around, especially in low security space.)
  1. If you are a gunnery pilot or tackler, you may want to check Angular velocity.
  2. Sort your overview by Distance, so that the closest items are at the top. This is the most logical way to sort your overview.
  3. Make sure your overview is wide enough to easily see the information in all these columns.


Setting Up Ship Mouse-Overs

  1. Go to the Ships tab.
  2. Make sure the following boxes are checked, and move them into the following order: (I find that this helps to separate all of the bracketed information, which can get confusing.)
    • Ship Type
    • Pilot name
    • Corp Ticker
    • Alliance Ticker
  3. Select Hide corp ticker if pilot is in alliance at the top of the tab.

This removes irrelevant information - if you’re fighting against a Privateer, you want to know he’s in the Privateer Alliance, not which corp he’s in.


Setting up Broadcasted Entities

  1. Go to the Misc Tab.
  2. Check Move entities with broadcasts to top.


Setting Up Colortags

  1. Go to the Appearance tab, and then the Colortag tab.
  2. Change your colortags to be in the following order:
    • Pilot is at war with your corporation/ alliance
    • Pilot is at war with your militia
    • Pilot is in your fleet
    • Pilot is in your corporation
    • Pilot is in your alliance
    • Pilot has excellent standing
    • Pilot has good standing
    • Pilot is in your militia
    • Pilot is an outlaw
    • Pilot has terrible standing
    • Pilot has bad standing
    • Pilot has security status below 0
    • Pilot has neutral standing
    • Pilot has no standing
    • Pilot (agent) is interactable
    • Pilot has bounty on him
  3. All of these items should be checked. Except the last item (Pilot has bounty on him) should be unchecked. Unless you really want to see who has a bounty, but this is mostly useless information under the current bounty system.
  4. Right click on Pilot is an outlaw and change the color to orange.
  5. Uncheck Use small colortags.
  6. Please double check your settings against the setting order above.

If you do not see 'pilot has no standing' in your colortag settings Pressing the 'Reset All' button at the bottom of the appearance tab will add that item to colortag and background. Despite the name, this button resets only the colortags/backgrounds.

Flagging in High Security Space In high sec, you usually can’t be attacked by anyone without CONCORD attacking and destroying them. However, if you commit the following actions in high security space, CONCORD won’t interfere if someone attacks you.

These are:

  • If you steal from someone.
  • If you aid someone who is flagged to someone else.
  • If you attack someone.


Setting Up Backgrounds

  1. Go into the Appearances tab, then go to the Background tab.
  2. Uncheck everything EXCEPT:
    • Pilot is at war with your corporation/ alliance.
    • Pilot is an outlaw
  3. Change your backgrounds to be in the following order:
    • Pilot is at war with your corporation/ alliance
    • Pilot is at war with your militia
    • Pilot is in your fleet
    • Pilot is in your corporation
    • Pilot is in your alliance
    • Pilot has excellent standing
    • Pilot has good standing
    • Pilot is in your militia
    • Pilot is an outlaw
    • Pilot has terrible standing
    • Pilot has bad standing
    • Pilot has security status below 0
    • Pilot has neutral standing
    • Pilot has no standing
    • Pilot (agent) is interactable
    • Pilot has bounty on him
  4. Right click on Pilot is an outlaw and select Toggle blink. The item that is selected should now be blinking.
  5. Right click on Pilot is an outlaw and change the color to orange.

This last step is to distinguish outlaws from war targets, since allies can sometimes appear as outlaws. With the above settings, orange flashy and the traditional red flashy are both shootable targets - you won’t get CONCORDed if you fire upon them.

Outlaws and war targets are the only two types of players you can attack in high sec space. The above settings will remove background from everything except the most important targets, allowing you to instantly see who to attack.

It is important to set backgrounds in the same order as colortags in case you decide to check them to make them more visible on the overview. This can be very helpful in wormholes to make it easier to see neutrals warping into your grid.

You have now set up all your general overview settings - we’ll move onto setting up individual presets now.


Setting Up a PvP Preset

  1. Go to your Filters tab, and go to the States tab.
  2. Make sure the following items are checked:
    • Pilot has a security status below 0
    • Pilot has bad standing
    • Pilot has bounty on him
    • Pilot has neutral standing
    • Pilot has no standing
    • Pilot has terrible standing
    • Pilot is an outlaw
    • Pilot is at war with your corporation/alliance
    • Pilot is at war with your militia
    • Pilot is in your militia
    • Wreck is already viewed
    • Wreck is empty
  3. Make sure that Pilot has excellent standing, Pilot has good standing, Pilot is in your alliance, Pilot is in your corporation, and Pilot is in your fleet are all unchecked.
  4. Go to the Types tab.
  5. Click Deselect all (at the bottom of the window).
  6. Right click on the Ships folder and click Select all. Everything in the Ships folder is now selected.
  7. Right click on the Charge folder and click Select all. Everything in the Charge folder is now selected.
  8. Open the Celestial folder and select Beacon, Covert Beacon, Sun and Warp Gate.
  9. Open the Drone folder and select Fighter Drone and Fighter Bomber.
  10. Open the NPC folder and select Pirate NPC.
  11. Follow the Saving a preset instructions below.

This preset is for seeing basic things in PvP. Be very careful when you lock ships and activate modules, if you are not careful you could shoot neutral pilots and get your ship destroyed by Concord or gate guns.

Please note that this preset shows people with bad (orange minus) and horrible standing (red minus). These people CANNOT be attacked in high sec space. Only attack people flashing red (war targets) or orange (outlaws) on your overview.


Saving a Preset

  1. In your overview settings, in the Filters tab , you should see Presets: not saved, and a 4-lined box next to it. Right click the 4-lined box. You can also find the same 4-lined box in your actual overview, on the tab that says Overview (not saved). Clicking on this will do the same thing.
  2. Once you have clicked on the box, select Save current type selection as…
  3. Type in 1 - PvP and click OK. You have now saved these settings as a preset.


Setting Up a PvP with Drones Preset

  1. Click the 4-lined box and select Load 1 - PvP.
  2. In Filters > Types, right click the Drone folder and select all.
  3. Save the preset as 1a - PvP + Drones.

This preset is useful if you are being aggressed by drones and want to destroy them, or want to help out a fleetmate who is being attacked by drones.


Setting Up a PvP Travel Preset

  1. Click the 4-lined box and select Load 1 - PvP.
  2. Go into Celestial and check the following, in addition to the stuff you’ve already selected:
    • Stargate
    • Wormhole
  3. Go into Deployable and select Mobile Warp Disruptor.
  4. Go into Structure and select Jump Portal Array.
  5. Save the preset as 2 - PvP Travel.

The PvP travel preset is designed as an all purpose travel mode. This is the preset that should be used by default on most PvP ops.

Stations are not included because some systems have too many stations, which can clutter up the overview. Thus stations should be left unchecked. If you want to travel to a station, right click in empty space and just select the station from there.


Setting Up a PvP Travel Without Neutrals Preset

  1. Click the 4-lined box and select Load 2 - PvP Travel
  2. In Filters > States, uncheck Pilot has neutral standing and Pilot has no standing
  3. Save the preset as 2a - PvP No Neut

Warning The Pilot has no standing state does not seem to function like other states. At the moment, some pilots with bad or horrible standings will not show up on the overview with this preset.

This is a useful preset to have for those times when you have to make a shopping trip to a busy system like Jita, or an FC takes the fleet into a really busy system. This preset will eliminate neutral pilots from the overview, reducing lag. Don’t use this during fleet ops unless absolutely necessary - seeing neutrals is useful, and flying without them on your overview can be dangerous.

Using this preset could prevent you from seeing neutral remote reppers that often need to be neuted, ecm jammed, and damped. It will also prevent you from seeing any pirates and other outlaws that have neutral status.


Setting Up a Missions Preset

For setting up a missioning preset, you can load the Standard preset, then run some missions. Remove things you don’t really need to see as you go - you can do this by right clicking on the item in the overview, then selecting Remove *item* from overview. Eventually you will have a preset that will suit your needs. Below are some suggestions on how to configure the mission preset.

Go to Filter > Types and uncheck Veldspar from the Asteroid folder.

Right click the Charge folder and select all. This will help you see probes on d-scan.

Open the Celestial folder, and uncheck Wreck. Some people like to have wrecks on their mission presets, the choice is yours. Having wrecks on overview can clutter it up, and make it more difficult to see pilots warping in to your mission area such as ninja salvagers or ninja looters. You can also remove Cargo Container if you like, although there don't tend to be many of these cluttering the overview during missions, and the mission completion items are picked up from cans so it can be handy to see them without switching tabs. Check Sun if you want an easily identifiable celestial to align to. This can be handy if you are not sure you can fully tank the rats; just align to the sun, and if your tank is in danger of breaking, call back your drones and warp to the sun. Make sure there are no collidable objects on the align path.

Open the Drone folder and check Combat Drone. This will let you see your own drones on the overview, which helps many pilots to remember to pull them into the drone bay after a mission instead of leaving them behind. If you mission in fleets you may want to uncheck combat drones.

You can uncheck Station from the folder of the same name so that these don't clutter your overview.

Go to Filter > States and unckeck Pilot is in your fleet. Unless you mission in remote repping fleets and want to see your fleetmates on the overview.

Once you’re done creating a missions preset, save it as 3 - Missions. If you never run missions, you obviously don’t need this preset. If you don’t run missions, but like to go mining, you could create one called 3 - Mining with just asteroids, belt rats, player ships and anything else you need. It’s up to you.

In some missions the objectives have strange types. For this reason it is a good idea to have an overview preset available with all types selected. Open the Default > Standard preset, in the Filter > Types tab, click Select All at the bottom. Save this preset as Everything. This preset can also be used by covert ops pilots to avoid being accidentally decloaked by items with 2000m.


Creating a Looting Preset

  1. Click the 4-lined box and select Load 2 - PvP Travel.
  2. Go to Filters > States and select all states by checking every checkbox, except keep Pilot is in your fleet unchecked.
  3. Go to Filters > Types, expand the Celestial category, and check the following items:
    • Biomass
    • Cargo Container
    • Wreck
  4. Save the preset as 4 - Looting

This is useful to loot the field after a PvP engagement. It is necessary to have all states selected to see all wrecks (except the Pilot is in your fleet state). Having fleetmates checked will clutter up your overview with your own fleet's ships.


Setting Up a Pod Saver Preset

  1. Click the 4-lined box and select Load 1 - PvP.
  2. Go to Filters > Types and click Deselect All.
  3. Go into Celestial and check Planet and Sun.
  4. Save the preset as 5 - Pod Saver.

This preset is used to get yourself out of tricky situations.


These are the times where you should switch to your Pod saver overview:

  • The FC calls a scatter or just says to get out.
  • You’re being targeted (you see yellow reticules on your overview) and you are in no position to take any fire.
  • You’re in danger of getting destroyed or know you’re about to get destroyed.
  • Your ship gets destroyed.


In any of these cases, do the following:

  1. Click on your Pod saver tab.
  2. Choose a random planet and click on it.
  3. In the Selected item window, start spamming the Warp to 0 m button (just keep on clicking it).
    • If you’re not warp scrambled, you will warp to a planet. In that case, either meet up with the fleet again or dock at a safe station. Listen for instructions by your FC. If you don't have instructions from your FC immediately upon coming out of warp, do NOT sit at a planet and wait, this can get you killed. Warp to a station to dock, or keep warping between planets at 30 to 70 km range, and try to make midsafe bookmarks between planets, then warp to those instead of warping between planets.
    • If you ARE warp scrambled, you’re not going anywhere. You should, however, keep on spamming the Warp to 0 m button. This is because when your ship is destroyed, you will appear in your pod. If you’re spamming that button, your pod will warp out as quickly as possible (usually almost instantly) and save both your clone and any implants you’re carrying. If you do this correctly, you should never lose your pod.
  4. Switch back to your PvP or PvP travel tab before you drop out of warp, so you can see any enemies on the other side.


When your ship is destroyed, a session change is initiated through you going from your ship to a pod. This can cause lag, and if you’re already spamming the Warp to 0 m button BEFORE this happens, your pod will usually warp out despite any lag that may occur (a chain of commands was built up before you got destroyed by the spamming). However, be warned that in rare cases of extreme lag you may not warp out. The session change timer is 30 seconds long and will prevent you from docking in a station or jumping through a stargate for that duration.

You can diminish lag by disabling your Mail and Notification notifications such as Blink NeoCom etc. This will reduce the delay between when you get killed and end up in your pod. Otherwise your client waits for the mail (insurance) to arrive and this might be the time they need to lock you.

The reason we use planets is because there usually isn’t anything dangerous at planets. Enemies could be waiting at stargates or stations, and big enemy POSes could be sitting near moons, so we warp to planets. However, some pirates and war targets will chase Uni members when they see them warping out to planets. For this reason, you should never sit still after coming out of warp at a planet. As explained above, keep warping between planets at 30 to 70 km range until you get new orders. If your ship was destroyed, you may want to dock up and get a rookie ship.

Also, you could have an aggression timer. Aggression timers stop you from docking or jumping through a gate for exactly 60 seconds after the timer begins. When the timer reaches 13m 59s (shown in-game when the timer says 13 minutes at the top left of your screen) you can dock up or jump. If you mouseover the aggression timer, it will show the seconds.


Setting Up a Wormhole Preset

  1. Click the 4-lined box and select Load 2 - PvP Travel .
  2. Go to Filters > States and check all the boxes, except Pilot is in your fleet. If you do wormholes in a small remote repping gang, you may want to keep fleetmates on your overview as well.
  3. Go to Filters > Types, open the Structure folder, and check Control Tower.
  4. Open the Celestial folder, and check Force Field.
  5. Open the Entity folder, and check Destructible Sentry Gun.
  6. Save the settings as 6 - Wormhole.

This overview setting is pretty generalized, but you’ll need to tweak it every now and then.

Remember that wormholes are 0.0 space. That means you can find anything inside, from capital ships, to bubbles, to bombs. Be extremely careful when entering wormhole space.

If there are any sleepers you cannot see on the overview, you may need to show all brackets, right click the sleepers that aren't on the overview, add them to overview, and save the preset again.

A wormhole POS without a force field could possibly have been abandoned.


Creating a Fleet Members Preset

  1. Click the 4-lined box and select Load 1 - PvP.
  2. Go to Filters > States and select the following (in addition to what was already selected):
    • Pilot has excellent standing
    • Pilot has good standing
    • Pilot is in your alliance
    • Pilot is in your corporation
    • Pilot is in your Fleet
  3. Save the preset as 7 - Fleetmates

This is a preset that can be useful for fleet, wing and squad commanders to quickly see where their squad members are so as to do a headcount. It will also show anyone who is flying with the fleet, but isn’t actually in the fleet. Sometimes people disconnect and need a fleet re-invite - you can quickly see who needs one with this preset. It’s also useful for seeing what ship types you have in your fleet.

Note that this preset will show all pilots in space, not just fleetmates.


Setting Up Bracket Presets

Brackets are the little icons you see in space, depicting different objects. Sometimes having too many of them can cause lag, but they are often useful.

There are occasions on which you might want your brackets to show different things than are on your overview. For example, bracket settings with drones selected, where my main overview settings do not show drones. This is because there are often swarms of drones about, which can quickly clog up one’s overview.

One example of a time you might want to see drone brackets in space is in missions. You want to warp off, but you don’t know whether your drones are still out. If you have drone brackets set, you can easily see when your drones are no longer in space. Additionally, you can see when someone has drones attacking you in PvP. This can be very useful.

Again, bear in mind that brackets can cause lag - use them at your own risk.

To create a bracket setting:

  1. Load the particular preset you want to create bracket settings for. For example, you might want drones on your wormhole setting, so you would load 6 - Wormhole .
  2. Add or remove items you do or don’t want to see in space (eg. drones).
  3. Save the setting as something you’re going to recognize as a bracket setting. For example, you might save your setting as 6 - Wormhole B .

See the next section to see how to set assign bracket presets.


Assigning the Tabs and Brackets

  1. Go to the Overview tabs tab .
  2. Under the Tab name column , enter the following five items:
    • PvP Travel
    • PvP Drones
    • Missions, Mining or Wormhole (choose whichever one you use)
    • Looting
    • Pod Saver
  3. Under the Overview profile column , assign each tab its respective overview profile, i.e. assign 2 - PvP Travel to the PvP Travel tab and so on.
  4. Under bracket profiles, do the same ( 2 - PvP Travel to PvP Travel tab and so on), unless you want to set your bracket profiles to something different . If you have set up bracket profiles as per the previous section, assign them here (eg. assign 6 - Wormhole B as a bracket profile for 6 - Wormhole ).
  5. Click Apply at the bottom of the window.

You should now have five different tabs with five different overview presets. During war, you can switch the Missions/ Mining tab to the PvP Travel without neutrals configuration. This tab can be used if you need to fight in a trade hub that has a lot of neutrals cluttering the overview. However, be warned that you cannot see neutral remote reppers if you use this tab, so it is often preferable to fight with the pvp travel tab and sort by alliance name with the arrow pointing down (or corp name if the war targets are not in an alliance).


Using all brackets

Eve isn’t a very system-intensive game, and some people have computers that can easily handle the game on max settings. If your system can handle it, you can select show all brackets in the overview options for each tab. This will let you see friendly and hostile ship brackets on the field as well as neutrals and drones. Having all brackets turned on can help you identify an on-grid fleetmate to use as a warp-in. Many players fly with all brackets turned on, and it is recommended to do so if your system can handle it. Zooming out the camera with all brackets turned on will give you a good view of what's happening on the battlefield.

You can press Option + Z to turn on all brackets.

In very large fleet fights, it is inadvisable to have brackets turned on, as this will cause server-side lag when there are hundreds of players shooting at each other in the same system. Most nullsec corps will have instructions for their members on how to minimize lag during large encounters.


Using the Tag Column

The Tag feature allows you to assign a number or letter to individual ships or objects in space which will be visible in the Tag column of the overview. The tag will remain assigned to the object until it is destroyed, you dock in a station, or enter a jump gate. This is useful for marking trigger ships during missions, marking trigger ships and kill order in wormhole sleeper sites, prioritizing PvP targets, marking NPC convoy ships for attack (see Eve Wiki Attacking Convoys Guide for more details), or any other activity for which you may need to quickly identify specifics objects for a fleet. Only a fleet member in a command position can mark tags.


Tagging Process

The Tag option is only available while you are a member of a fleet, and in a command role (i.e. FC, WC, or SC). If you are alone, you may simply form a fleet with yourself (your default role with be FC).

To tag an object, simply right-click, select "Tag" from the context menu, and you will be given a choice of numbers or letters. Pick the number or letter you wish to use and you are done.


Advanced Tips

Variant Presets

PvP Travel + Blues

You can make a variant of the PvP Travel preset that also shows pilots in good standing to the Uni. Check Pilot is in your corporation, Pilot is in your alliance, Pilot has excellent standing, Pilot has good standing.

This can be helpful to see what kind of friendlies are flying around. This will not show fleetmates. Fleetmates that disconnect from the game will appear on your overview while they warp off, which makes noticing them easier.

Adding blues to your overview will show criminally flagged blues, like pirates we have a non-aggression pact (NAP) with. If you show blues, you must be very careful to check icons of outlaws so that you do not shoot blue pirates.


PvP Travel + Planets

Having the planets on overview can sometimes be useful. This can let you see which planets are in d-scan range (approx 14.4 AU). Sometimes used by lowsec PvP fleets to see where the ships on d-scan could be located.


PvP Travel + POS

Its sometimes good to know if there are control towers in a system, especially in wormholes, and in lowsec when trying to find enemy ships. Control Tower can be found in the Filter > Types tab in the Structures category. Control Towers are more commonly known as POS, or Starbase.


Militia column

The Militia column can be hidden in the right side of the screen if you don't need that information. It is mostly used by lowsec PvP fleets to identify Faction Warfare pilots, some of which are unlikely to aggress Uni fleets (although some FW corps will happily take a criminal flag to shoot down Uni targets of opportunity).


Additional Information

How to Check For War

Click the Corporation button on your NeoCom. Select the Wars tab. Select the Our Wars subtab.

To view the status of someone else's wars, if you are in a different corporation:

As above, but choose the Other Wars subtab. Click the Select button at the bottom of the window. Enter the name of the corporation or alliance you're interested in.

Note that a corporation which is a member of an alliance cannot be viewed by itself; you have to search for the alliance. The "Eve University" corporation is a member of the "Ivy League" alliance.

The war list will tell you when each war began, whether it's live or in warmup ("Can Fight"), and when it was terminated ("Retracted") if in cooldown. The cooldown period will end 24h after the time listed for retraction.

It is your responsibility to check for war. Check your mail notifications every day if you log in. If you're not sure if there is a war, or if it is live, check the NeoCom.


Feedback

If you wish to give feedback or suggestions concerning this guide, eve mail or send a private message on the Eve University forum to the Wiki Manager.


A Note on .xml Export File Requests

Please don't ask, it's never going to happen.

Only using the export/import feature can lead you to shoot friendly pilots and other complications. Always go through the entire overview setup process when configuring a new account or a new computer.

The XML file only has part of the necessary configuration contained within it. This is problematic if you wish to replicate your overview setup between two computers, or two Eve instances on the same computer, because you have to do a lot of manual configuration after the XML file import anyway.


Conclusion of the Guide

Congratulations! You’ve set up your overview.

Don't hesitate to customize it to your liking once you understand how it works.