Research

A lot of this information refers to the upcoming industrial patch/expansion, Crius, expected to be released on 22nd July. It may not be relevant for industry on live servers currently.

Research is the process of improving an Original Blueprint (BPO). Two types of research are performed: Material Efficiency research and Time Efficiency research, also known as ME and TE. Material Efficiency research decrease the amount of materials required for the production of the blueprint, whilst Time Efficiency research decrease the production time of the item produced.

Research may also involve blueprint copying, which produces Blueprint Copies (BPC). As the blueprint is researched and copied, the ME and TE levels of the original blueprint will be transferred onto the blueprint copy.

Research Skills

None of these skills are actually required for any research. However, they will all make your BPO operations far easier and quicker, and are very worthwhile training if you intend to do a lot of research.

• Science - reduces time required to copy a BPO, by 5% per level

Science is the basic skill in the Science section of the character skills. You don't need this skill to perform blueprint copying. This skill will reduce the time required for blueprint copying, by 25% at maximum level. This skill is also the prerequisite for almost all the other skills in the science section.

• Research - reduces time required for Time Efficiency research, by 5% per level

You don't need this skill to perform time efficiency research. This skill will reduce the time required for TE research, by 25% at maximum level. Requires Science III.

• Metallurgy - reduces time required for Material Efficiency research, by 5% per level

You don't need this skill to perform material efficiency research. This skill will reduce the time required for ME research, by 25% at maximum level. Requires Science IV.

• Laboratory Operation - allows you to perform one additional research or copying job per level

Every character starts off with the ability to run a single research or copying job without needing to train this skill. Laboratory Operation gives you an extra research/copying slot for each level trained: if you train it to V, you can run 6 research or copying jobs at once. Requires Science III.

• Advanced Laboratory Operation - allows you to perform a further additional research or copying job per level

Once you have trained Laboratory Operation to V, you can then train this skill to increase still further the number of concurrent research or copying jobs you can perform, to a maximum of 11 jobs.

• Scientific Networking - allows you to start research jobs at range, without needing to be in the location of the BPO/facility.

Requires Laboratory Operation V. Level I in this skill gives you the ability to start research jobs anywhere in the same system, e.g. you can be docked a station and start a job in your POS at the next moon. Training it higher extends the range at which you can start jobs, to full region range at V.

Other Helpful Skills

• Cybernetics - allows the use of implants.

Certain skill hardwirings - the Zainou 'Beancounter' range of implants - that boost research & copying speeds are available, for which Cybernetics is required. A dedicated researching character would benefit greatly from one or more of these implants.

• Industry and Mass Production - faster manufacturing and multiple manufacturing lines.

If your researching character also builds items from the BPOs (or BPCs) then do not neglect the manufacturing skills.

Material Efficiency Research

Material Efficiency (henceforth known as ME) research reduces the amount of materials required to manufacture the item from the BPO. It can clearly be seen that the fewer materials you require to build an item, the more profitable selling your item is likely to be. New BPOs bought from the market will have an ME of 0%, but you can often find BPO sellers in contracts or on the Sell Orders forum, that will sell you pre-researched BPOs (or BPCs) for your manufacturing business.

The current ME level of a blueprint can be seen by looking at the info on a blueprint, or by opening the Industry window and browsing your blueprints. Each time you perform ME research on a BPO, it will reduces the materials required by -1%. You can do ME research 10 times in total, for a total reduction of -10% on the materials required.

Materials will always round up to the next whole number, so you will never need 23.75 units of tritanium to build a module, for example, or you will never need 0.75 Atrons to build an Ares.

It is important to note that material rounding happens after you have multiplied by the number of runs. Here's an example, the Nanofiber Internal Structure I.

image

You can see that at 0% ME, the tech 1 nanofiber requires 10 Isogen and 1 Noxcium to build. If you researched it to 9% ME, it would require 9.1 Isogen and 0.91 Noxcium. Because minerals round up, if you only did a single run to build a single nanofiber, the amount of materials required would not actually change. However, if you did 100 runs to build 100 nanofibers, because material rounding occurs after you multiply by the number of runs, you would need 910 Isogen and 91 Noxcium to build 100 nanofibers.

image

In this way, even researching to -1% or -2% ME can be worthwhile if you intend to build a large number of items.

EXCEPTION: ships, and certain other input materials, are fixed. Example: you will always need 10 Rifters to build 10 Jaguars, never 9, even if your Jaguar blueprint is fully researched.

Time Efficiency Research

Time Efficiency (henceforth known as TE) research reduces the amount of time required to manufacture the item from the BPO. It can be seen that the faster you can build an item, and thus re-use your production slots for more items, the more profitable your business is likely to be. New BPOs bought from the market will have a TE of 0%, but you can often find BPO sellers in contracts or on the Sell Orders forum, that will sell you pre-researched BPOs (or BPCs) for your manufacturing business.

The current TE level of a blueprint can be seen by looking at the info on a blueprint, or by opening the Industry window and browsing your blueprints. Each time you perform TE research on a BPO, it will reduces the time required by 2%. You can do TE research 10 times in total, for a total reduction of -20% on manufacturing time required.

This BPO for a Nuclear S shell - small projectile ammunition - has been researched twice for Material Efficiency, for a -2% material requirement; and five times for Time Efficiency, for a -10% time requirement.

How long does research take?

ME and TE research both take the same time to perform. The base time for the first level of research can be seen in the information of a BPO.

This is the time required to go from either ME or TE 0%, to -1% ME or -2% TE, which is one level of research. In this case, of the Archon capital ship, the first research level takes 5 hours 50 minutes (which would be reduced by your skills and/or POS facility bonus). Each further level of ME or TE takes exponentially longer to perform than the previous level.

ME and TE levels and research duration are counted separately.

graph of exponential nature here...

A Research Laboratory can be anchored in a POS, and gives a 30% reduction to both TE and ME research times. The Hyasyoda Research Laboratory, a faction variant, gives 35% time reductions. Researching in a POS represents a very significant time saver.

Copying

Copying a blueprint original produces a number of a blueprint copies with a specific number of runs. For example, in the image below we have chosen a Blackbird BPO, requested 5 runs, and each resulting copy would have 10 runs. The final output would produce 5 BPCs with 10 runs each, from which you could build 50 total Blackbirds.

Once you have used up all the runs on a BPC, it is destroyed (you simply won't get it back after the last manufacturing run). You cannot research BPCs, so make sure your BPO is researched to the ME and TE levels you require before you copy it.

Different BPCs have a different maximum number of runs you can set. Ship BPCs for example can only be given 10 runs, whereas most modules and ammunition can have up to 600 runs. You can see the maximum runs per copy in the information of a BPO

How long does copying take?

As well as the maximum runs per copy, you can also see the base copy time - a.k.a. time per run - in the information of a BPO.

Copying of a BPO always takes 80% of the build time, on a per run basis. Note that this is before applying bonuses for skills and POS facilities - because manufacturing and copying have different skills & facilities (and teams) affecting their duration, your personal copy time may not be exactly 80% of your personal build time. Copy time is also NOT affected by the level of TE on the BPO. For example, small ammunition and drones, and basic modules, typically take 5 minutes to build, and thus will take 4 minutes to copy.

This base copy time is then multiplied by the number of runs and the runs per copy value. Or, in other words, the total duration of your copy job is the base copy time, times the number of items you could build with the output copies. For example, whether you want five 10-run copies or ten 5-run copies, the total copy time would be 50 times the base copy time.

A Design Laboratory can be anchored in a POS, and gives a 40% reduction to copy times. Copying in a POS represents a very significant time saver.

Why should I copy my BPOs?

1. Security
   • Well-researched BPOs take a lot of time to produce, especially for the bigger ships such as capitals. Putting your BPO in a POS - for a facility reduction in materials and time - makes it vulnerable to attack. For this reason you can first copy the BPO, and then take only the BPC out to the POS for manufacturing, leaving your BPOs safely in station.
   • In-corp security can also be increased using BPCs. If you don't trust your corp mates with your BPOs, you can instead keep a personal copy line running and release frequent BPCs for corp usage.
2. Invention
   • Creating a Tech 2 BPC can only be done using a Tech 1 BPC - not a BPO. This process is called invention, and requires a T1 BPC of the item you wish to invent (for example, if you want to invent a 425mm Autocannon II, you need a BPC for a 425 Autocannon I).
3. Multiple manufacturing jobs
   • You can only run a single manufacturing job at a time from a BPO. Using the BPO to create multiple BPCs, and then manufacturing from those BPCs instead, can increase your productivity.

The previous version of this page, covering pre-Crius research, can be found here.