Incursion fitting principles
Incursion links |
---|
General |
Advanced |
EVE University |
Preparations |
Fittings |
Guides |
Fitting principles
Incursion fleets rely on good resists and buffer supported by a logistics. There are simply too many enemies to be able to fit a strong enough local tank, not to mention that by sacrificing a small portion of your fleet to bring in logistics instead of more damage dealers, the rest of the damage dealers can fit more offensive modules and your fleet will perform better.
Once you have a good enough tank, the rest of your spare slots should be used to augment your damage potential. While there's such a thing as under-tanked, being over-tanked is not only wasteful in incursions but even dangerous if done at the cost of offence.
See Preparing for Incursions for more information about what skills we ask that members of the EVE University Incursion Community have trained. While other communities might have similar requirements, this is just what we recommend.
Omni damage and resists
The Sansha incursion rats deal damage in two ways, lasers (EM and thermal) and torpedoes (kinetic and explosive). As such, they hit across all four resist types. While you can sometimes compensate for a low kinetic resist by having a higher explosive resist, or get away with lower resists due to having a small signature and high speed, generally you don't have the luxury of having resist holes in incursions.
Just as they do damage across the board, the Sansha incursion rats have omni tanks as well. The only notable exception is the Lirsautton Parichaya, it's a little weaker against thermal damage and stronger against explosive damage. So contrary to missions where Amarr and Gallente weapons are somewhat limited due to their set damage types, these weapons are not hampered by resists in incursions.
You can find out more statistics about the Sansha incursion rats on the Sansha's Manual page.
Applied DPS
One of the most important aspects to realize is that whatever DPS (damage per second) your favourite third party fitting tool tells you that you have, or whatever the fitting window ingame tells you, is worth nothing if you cannot apply that damage. Hence the term "applied DPS" as opposed to "paper DPS" which is basically just your potential damage.
Your velocity, your target's velocity, approach vectors, your gun's signature resolution, your target's ship signature, locking speed, locking range, your weapon's optimal and falloff range and tracking all play a vital part in how much of your damage you'll be able to apply on your enemy. See turret damage or the gunnery guide for a more comprehensive introduction to the factors determining how much damage you'll end up doing when you undock and leave your theoretical bubble. Practically this means that utility modules often make or break fleets.
We always use faction ammunition in incursions for the added damage compared to regular tech one ammunition. Certain tech two ammunition is used for specific ships or roles, like Null L for blaster boats or Scorch L for pulse lasers, but most of the time you'll be using faction ammunition since it does not suffer the tracking or range penalties most short range tech two ammunitions do.
Utility modules
Utility modules refer to modules you fit that doesn't directly give you a higher dps in your favourite third party fitting program or on your fitting screen ingame. Instead they act as force multipliers of sorts making up for weaknesses or capitalize on strengths for increased efficiency. There are also modules that has no impact on your offensive capabilities, but are invaluable when things go wrong.
For vanguards we make sure we have at least one sensor booster and one web. If we have room for more midslots we primarily go for a second web first before looking into other modules. For assaults and up, once you've ensured that you have the locking range needed (potentially requires you to use a sensor booster) and fitted any required propulsion modules. For utility highslots, pick the most important one. So a capacitor transmitter if you run with Basilisks or need a cap chain and a remote shield booster if you run with Scimitars or have no need for a cap chain. Should you have the luxury of having more than one utility highslot, just bring both. If you have no use for either or lack the powergrid to fit them you could use an auto targeter for more locks, drone link augmentor for longer drone control range etc.
Supporting short or long range setups
The priority for certain utility modules change depending on your setup. If you're fighting mostly within web range, webs themselves end up giving you far more applied damage than tracking computers do. On top of that, they benefit everyone who's shooting that target and not just you. But if you're engaging primarily at range, outside web range, a web is utterly useless and you benefit more from a target painter or local tracking computers to improve your damage application. While sensor boosters are critical in vanguards, they are less important in assaults and headquarters.
Below are some examples of how you could change your midslots depending on your fleet composition for vanguards.
Short range | Long range | ||
---|---|---|---|
Flexible [1] | Dedicated webber [2] | Flexible [3] | Alpha doctrine [4] |
Sensor Booster II Federation Navy Stasis Webifier Federation Navy Stasis Webifier Tracking Computer II |
Sensor Booster II Federation Navy Stasis Webifier Federation Navy Stasis Webifier Federation Navy Stasis Webifier |
Sensor Booster II Federation Navy Stasis Webifier Phased Weapon Navigation Array ... Tracking Computer II |
Sensor Booster II Sensor Booster II Tracking Computer II Tracking Computer II |
- ^ If your fleet has a decent amount of webs already, a tracking computer to increase your tracking or extend your range will benefit you more than adding another web.
- ^ If you're one of the few with webs, use as many as possible to capitalize on your role.
- ^ In fleets where you're shooting targets both at range and within web range, a mix might be beneficial if you don't have dedicated webbers.
- ^ In a setup where you rely on shooting things where they spawn, you need both the tracking and range as well as the ability to quickly lock targets up. In competitions the faster lock time is also advantageous.
When in doubt, just follow the recommended fits on the Vanguard and Assault fitting pages or ask your fleet commander for advice. See Anatomy of Incursions for more information on how you can change these modules around for different tactics based on your fleet composition.
Drones
Drones can be a tremendous asset, if you pick the right ones and use them intelligently. The sum of all the drones in fleet can easily amount to the equivalent of adding an extra pilot or two on grid, so it's not something to treat lightly. See utilizing drones for tactical information on how to make the most of drones.
Drone choice
When selecting drones you need to factor in how to get the best mix of microwarpdrive and orbital speeds, as well as tracking and optimal range for the type of fleet and sites you run - generally smaller sites have more frigates, which need fast, well tracking drones. Amarr drones generally provide the best mix for most situations except for headquarter sites where slower drones, but with higher focused DPS, are useful for taking down large ships.
Below are the drones we recommend within our community:
Recommended drones/site | Light drones | Medium drones | Heavy drones | Sentry drones |
---|---|---|---|---|
Vanguard sites | Acolyte II | Not recommended | Not recommended | Garde II [1] |
Assault sites | Acolyte II | Infiltrator II | Not recommended | Curator II [2] |
Headquarter sites [3] | Hobgoblin II | Hammerhead II | Ogre II [4] | Not recommended |
- ^ (Situational) Unbonused sentries have considerably lower tracking and needs to operate at range or stay on cruisers..
- ^ (Situational) In order to use Curator II drones you need to remain stationary more often than not. The extra range of curators is needed for the 35 - 65 km engagement range.
- ^ Drones are often put on stationary objects in headquarter sites, thus focus shifts from Amarr drones (speed and application) to Gallente drones (maximum damage).
- ^ If cost isn't an issue, Gecko or 'Augmented' Ogre drones are preferred due to increased speed and better damage application.
Rigging choice
It's very easy to dismiss the importance of the rig selection when buying a new ship. While it's usually not something a new pilot needs to worry about when getting any of the minimum fits posted on the wiki, it's extremely important for people looking to get a new ship as it heavily influences your options in terms of flexibility and utility slots (which is everything in incursions). Don't spend too much ISK on a temporary setup, either go for a cheap "good enough" setup while you're saving up for your ideal setup, or just wait until you can afford the whole setup you want in the end.
Electromagnetic or thermal rig
In general the electromagnetic rig will free up more midslots, but tends to require fancier deadspace modules to compensate for the overall lower resists. The thermal rig gives you a stronger and more flexible tank without having to rely on the high-end deadspace modules, at the cost of not being able to free up as many midslots.
Defence or offence
Going for offence means that you're limited to a single tech one resist rig in combination to your burst rig, due to the high calibration cost of the tech two damage rig. Choosing a more defensive setup will allow you to fit a tech two resist rig as well as making full use of the other two rigs. The offensive rigs are usually much cheaper than the defensive ones, but since the offensive setup usually has to up the quality of their deadspace modules to get a comparable resist profile, they're often forced to use higher tiered deadspace mods.
Flexibility vs efficiency vs cost
Given the different needs for tank and utility modules between the different type of sites, most incursion communities go for the most efficient rig setup for the kind of sites they are running. A community running vanguards exclusively often have different setups than those who run headquarters only. Communities that push for high-end fits with expensive deadspace modules usually have different rig selections too, since those stronger modules opens up for a few more options.
Going for the most efficient setup is of course always going to be the strongest way to do it, but sometimes you have to be practical. In our case, within our community, we factor in flexibility and cost a lot more. We want our members to be able to use the same ship for any type of site without having to resort to spending billions on faction and deadspace modules. That doesn't stop people who want to from doing it, but it does mean that some of our recommended fits will differ quite a lot from that of public communities.
Determining a proper tank
There are a few easy ways to determine whether a tank is ok or not. Below are some key aspects that help when you're testing your ship in your favourite third-party fitting tool or if you've taken on the role of waitlist manager and need to quickly gauge whether the fit someone x up with is ok or not.
Resist holes
A lot of ships share a standard resist profile, so they share the same resist holes and have the same issues and weaknesses. Understanding what innate weaknesses a ship has is key to knowing how to best raise it to the desired high average resists mentioned above.
Below is a list of different resist profiles for various ship classes as well as a few specific ships with deviating profiles. The last column lists the obvious weaknesses of the class/hull, which will help you determine how to best achieve the desired resist profile. Plugging a hole is usually a simple matter of adding a resist rig or a combination of a rig and a shield amplifier, then up the resists in general by using one or two invulnerability fields.
Ship | Base resist profile | Comments |
---|---|---|
Regular/faction battleships [1] | 0%20%40%50% | An EM hole and a weak thermal resist. |
Resist bonused battleships [2] | 20%36%52%60% | Weak EM and thermal resists, but no resist holes. |
Scimitar | 75%60%40%50% | No resist holes. |
Basilisk | 0%80%70%50% | An EM hole. |
Effective shield hit points
You can judge your tank by many means, but for Incursions the best way to measure your tank is to look at effective shield hit points (ESHP), as opposed to damage per second repaired (DPS-tank) or the generic effective hit points (EHP). This is because a lot of ships have significant armour and hull hit points, so the effective hit points value can be quite misleading on a battleship with a damage control for example, as the EHP-value skyrockets compared to a ship without a damage control fitted, but very little of it applies to the actual ESHP. You also need to factor in things like speed and signature, because a smaller ship that is orbiting will be a lot harder to hit than a large, stationary ship. So don't casually compare a ship's effective shield hit points against another without taking that into your consideration.
Shield hit points and resists
While the above mentioned effective shield hit points is a good measure, it is not always practical to use on the fly. For one it doesn't really tell you if the ship has any glaring resist holes, so for practical reasons we tend to speak in more general terms -- Shield hit points and resists. It's much easier to just ask the pilot "How many raw shield hit points do you have?" and "What are your resists if you undock and turn on all your modules?". It's very easy for people to check this ingame and it tells us enough to judge whether or not the fit is ok.
Guidelines
Below are some rough guidelines for what a proper tank might be for a battleship (there isn't much variation to speak of for logistics). Since we focus mainly on low skilled, kitchen sink setups we're going with a relatively high recommended level for our community. The values below are of raw shield hit points and paired average resists (EM/thermal and kinetic/explosive), values before boosts for easy comparison.
Vanguards (33k+ effective shield hit points) 70% resists and at least 10,000 raw shield hit points. | |
Assaults (40k+ effective shield hit points) 70% resists and at least 12,000 raw shield hit points. | |
Headquarters (52k+ effective shield hit points + 100k effective hit points in total) 73% resists and at least 14,000 raw shield hit points. |
Naturally lower shield hit points is doable if you adjust your resists accordingly. In vanguards and assaults it's also possible to drop a little lower in really good fleets. Just remember that resists are far more important than raw shield hit points, as higher resists has the secondary benefit of increasing the efficiency of remote repairs. Below is a graph illustrating how damage changes with scaling resists.
Resists | Actual damage taken | |
---|---|---|
61% resists | 30% more damage (39% damage taken) | |
64% resists | 20% more damage (36% damage taken) | |
67% resists | 10% more damage (33% damage taken) | |
70% resists | Baseline damage (30% damage taken) | |
73% resists | 10% less damage (27% damage taken) | |
76% resists | 20% less damage (24% damage taken) | |
79% resists | 30% less damage (21% damage taken) |
Stacking penalties and offgrid boosts
A ship with fewer modules or rigs stacking will also benefit more from boosts, thus not suffering quite as much as they might initially seem to. This of course means they also have more to lose if boosts go down, which is worth noting.
Further down this page you'll see examples of this with the advanced setups, if you pay attention to the normal resist profiles vs the resist profile with offgrid boosts. The EM-rig setup for vanguards for example has a deceptively low EM/thermal resist, averaging around 62% instead of the recommended 70%. This would suggest nearly +30% more damage taken from turret damage, as your resists are almost 9% lower (see the graph above). But due to less stacking penalties that setup ends up having roughly 69% average EM/thermal resists after boosts which is fairly close to the 72% of our recommended fits and will eventually only take +10% more damage from turrets, while taking torpedoes just fine.
Upgrade priorities
There are a lot of ways to spend ISK on your incursion character in order to improve your performance, be that buying a pirate faction battleship, getting faction and deadspace modules or injecting implants into your head. Some of these options are more effective than others, so before you start "throwing ISK at the problem" with wild abandon ... take a moment to consider your options.
Buying a pirate faction battleship
In almost all cases, upgrading your hull should be your first goal if you're looking to invest more ISK. While faction and deadspace modules are great, pirate faction hulls often give superior bonuses without inflating the value of droppable modules fit to your ship. For the most part it's a matter of certain pirate faction battleships having double damage bonuses and powerful role bonuses instead of having an offensive and a defensive one, plus much better overall ship stats.
Below is a list of some of the differences (relevant to incursions) for a Vindicator compared to a Hyperion and a Machariel compared to a Maelstrom. The same kind of vast improvement is found when upgrading to Nightmare as well, even though it doesn't have a direct tech one ship to compare it to.
Improvements | Hyperion → Vindicator | Maelstrom → Machariel |
---|---|---|
Effective turrets [1] | +22,2% more damage | +9,4% more damage |
Tracking speed | +37,5% more tracking | Similar |
Turret falloff | Similar | +50% more falloff |
Capacitor recharge [2] | +14,3% capacitor recharge | +4,7% capacitor recharge |
Shield hit points | +16,7% more shield hp | +16,5% more shield hp |
Signature | 17,5% smaller signature | 23,9% smaller signature |
Targeting range | 20,8% longer lock range | Similar |
Drone capacity | -25 m3 drone bay | +25 m3 drone bay |
Scan resolution | -9,1% scan resolution | +38,9% scan resolution |
Warp speed | Similar | +1 AU/s warp speed |
Inertia | +29,7% more agile | +29,4% more agile |
- ^ Effective turrets is a measure of raw turrets modified by rate of fire or damage bonuses of the hulls as well as role bonuses.
- ^ Peak recharge is a measure of capacitor capacity / capacitor recharge time * 2,5 (peak coefficient). See capacitor recharge rate for more information.
Faction and deadspace modules
There are many ways to use faction and deadspace modules to vastly improve the efficiency of your incursion ship. Some of these modules are cheap and might not be too much of a concern or downright required (like the Federation Navy Stasis Webifier), but others are worth quite a bit of ISK and a second thought is warranted if you consider getting them. The cost of improving your efficiency rises exponentially as well, so while the first round of upgrades might be very cost-efficient, taking it one step further will quickly put you in a position where you're literally throwing ISK away for minor improvements.
Consider the actual benefit you will get from upgrading a certain module. Getting a deadspace hardener is useful for most ships as it frees up a midslot and potentially a lowslot as well. But a faction tracking computer or a sensor booster might make sense for public fleets built to compete, but for our community that is hardly a worthwhile investment.
What do you get in return?
To put this into perspective you need to factor in stacking penalties. If you're just using one module to a given effect, it's easy to calculate and see the difference, but when you have more intricate combinations where things end up 2nd, 3rd, 4th or 5th in the stacking hierarchy, it might be a little harder to see what you get out of it.
Worthwhile investments
Here's a list of some modules that are worth upgrading. While some give a larger effect, they all contribute enough to warrant their cost. That said, just because the A-type is very efficient doesn't mean everyone should get one, as you can often get by with a B- or even a C-type for certain fits. At the same time, even though faction damage modules give a relatively small increase, they are often worth it because there is nothing better to use and every scrap of increased damage helps.
Module | Benefit |
---|---|
1 x Pithum C-Type Adaptive Invulnerability Field is 35,42% stronger than an Adaptive Invulnerability Field II (top of the hierarchy [1]) 1 x Pithum B-Type Adaptive Invulnerability Field is 45,83% stronger than an Adaptive Invulnerability Field II (top of the hierarchy [1]) 1 x Pithum A-Type Adaptive Invulnerability Field is 46,875% stronger than an Adaptive Invulnerability Field II (top of the hierarchy [1]) | |
1 x Federation Navy Tracking Computer is 3,85% stronger than a Tracking Computer II. 2 x Federation Navy Tracking Computers are 7,43% stronger (top of the hierarchy [1]). 2 x Federation Navy Tracking Computers are 5,97% stronger (if you get a link [2]). | |
1 x Serpentis Sensor Booster is 3,12% stronger than a Sensor Booster II. 2 x Serpentis Sensor Boosters are 6,07% stronger (top of the hierarchy [1]). 2 x Serpentis Sensor Boosters are 5,04% stronger (if you get a resebo [2]). | |
1 x Federation Navy Magnetic Field Stabilizer is 2,27% more effective compared to Magnetic Field Stabilizer II [3] 4 x Federation Navy Magnetic Field Stabilizers are 6,45% stronger (top of the hierarchy [1]). 4 x Federation Navy Magnetic Field Stabilizers are 4,36% stronger (if you have a T2 burst rig) [2]). |
- ^ a b c d e f The modules are on the top, meaning the first module gets 100% effect, second 86,9%, third 57,1% all according to normal stacking penalty rules.
- ^ a b c Remote tracking computers, remote sensor boosters and tech two burst rigs are stronger and thus pushes the modules down to 2nd and 3rd (etc) in the hierarchy, meaning they are both penalized and working at 86,9% and 57,1% respectively (or more if you stack more modules).
- ^ The same applies to Gyrostabilizer II and Heat Sink II modules and their relative strength compared to their faction counterparts.
Questionable investments
These modules fall into the category of "more ISK than sense", as they give very little or in some cases no actual improvement.
Module | Benefit |
---|---|
1 x Republic Fleet Tracking Enhancer is only 0,46% stronger than a Tracking Enhancer II. 2 x Republic Fleet Tracking Enhancers are only 0,67% stronger (2nd and 3rd in the hierarchy [1]). 2 x Republic Fleet Tracking Enhancers are only 0,41% stronger (3rd and 4th in the hierarchy) [1]). |
- ^ a b Tracking Computer, both local and remote ones from scimitars, that are scripted for tracking are stronger than the tracking bonus from tracking enhancers. So if you have a tracking computer, or two, or an incoming link, the small bonus will be 2nd and 3rd, 3rd and 4th or even 5th and 6nd (suffering harsh stacking penalties).
Injecting implants
There are plenty of hardwiring implants that are useful for incursion runners, with effects ranging from damage projection (tracking, damage or rate of fire) to fitting/support related effects (increased capacitor, powergrid or CPU) and warp speed. The bonuses from implants do not suffer stacking penalties, thus even the +3% variants are quite potent.
The best hardwiring implants (apart from officer implants) come from the CONCORD Loyalty Point store and give a +6% bonus but require Cybernetics V. Implants are available for all skills and wallets however, ranging from the 1%, 3% and 5% implants of normal LP stores to the CONCORD specific 2%, 4% and 6% implants.
As with all things, do your research and see if it's cheaper to simply buy it off of the market instead of getting it yourself from the LP store. See hardwiring implants for a full list of available implants.
Suitable implants for times of war
Consider having a clone dedicated for doing incursions during peace as well as a cheaper clone you can use during war.
While one shouldn't run around with a head full of expensive implants during war, there are some rather cheap +3% implants you could use even while at war. A set of 4% implants from the CONCORD Loyalty Point store might also be worth considering, they go for 37,5M ISK and 37,5k CONCORD LP each.
Recommended implants
The icon will tell you what effect the implant gives you and the first letter after the - denotes the slot it uses. For example the Motion Prediction MR-703 implant occupies slot 7 and gives a 3% bonus. The bonus is omitted in this table as people will get different bonuses based on their skills and budget.
Gunnery implants | Capacitor implants |
---|---|
Motion Prediction MR-7 [1] (turret tracking) Gunnery RF-9 (turret rate of fire) Large Projectile Turret LP-10 (damage) Large Energy Turret LE-10 (damage) Large Hybrid Turret LH-10 (damage) |
Engineering EG-6 [2] (powergrid) Acceleration Control AC-6 [2] (AB/MWD speed) Energy Systems Operation EO-6 (capacitor recharge) Energy Management EM-8 (capacitor capacity) Zor's Custom Navigation Hyper-Link [8] (AB/MWD speed) |
- ^ For the high-end tracking speed implants, the Ogdin's Eye Coordination Enhancer implant is often much cheaper than the 6% implant from CONCORD. It only requires Cybernetics III.
- ^ a b For people who doesn't need slot 6 for capacitor implants or special implant sets like ascendancies, either the Engineering EG-6 or Acceleration Control AC-6 implants could be useful to help fit for larger assault and headquarter sites.
Implant sets
Apart from hardwiring implants occupying slot 6 through 10, you can also use special implant sets using slot 1 through 6 (slot 1 through 5 being the usual attribute implant slots). The genolution set can be used to give various boosts to your ships capabilities while the ascendancy set (comes in mid- and high-grade variants) only has a niche use in communities flying special doctrines based on improved warp speed.
Genolution set (fitting/support) | Ascendancy set (warp speed) |
Genolution Core Augmentation CA-1 [1] (pg, cap & perception) Genolution Core Augmentation CA-4 [2] (agility, armour & memory) Genolution Core Augmentation CA-3 [3] (velocity, shield & willpower) Genolution Core Augmentation CA-2 [4] (CPU, cap & intelligence) |
Ascendancy Alpha [1] (warp speed & perception) Ascendancy Beta [2] (warp speed & memory) Ascendancy Gamma [3] (warp speed & willpower) Ascendancy Delta [4] (warp speed & intelligence) Ascendancy Epsilon [5] (warp speed & charisma) Ascendancy Omega [6] [1] (set bonus) |
- ^ A cheaper alternative is the Eifyr and Co. 'Rogue' Warp Drive Speed WS-618 implant, which is almost as good.
Battleship setups
Below are some examples of tank setups for battleships; both the setups we use for our minimum fits as well as some advanced ones for high-end ships. The sections show the variance between tanking features of the ship, notably midslots but also rigs or other in-built resistances.
In order to highlight the transition of each type of fit from vanguards to headquarters, each setup will not only show the vanguard fit in question, but also how it works if you take off some tank as well as what's needed to make that setup work for assaults and headquarters.
Minimum setup
This is the minimum skill setup that we use within our community and these provide the basis for the fits we provide at the Vanguard Incursion fits page. It is designed to cheap and flexible enough to be useful in a variety of different sites. For assaults and headquarters, we often use a Large Shield Extender II to ensure that everyone has enough buffer, even with the minimum skills we require.
This assumes our minimum skills so the EM resist can be up to 2% higher with EM Shield Compensation V instead of III.
Slots | Vanguard (less tank) [1] | Vanguard | Assault | Headquarter |
---|---|---|---|---|
Freed up mid slot Adaptive Invulnerability Field II Adaptive Invulnerability Field II EM Ward Amplifier II |
Freed up mid slot Adaptive Invulnerability Field II Adaptive Invulnerability Field II EM Ward Amplifier II |
Large Shield Extender II Adaptive Invulnerability Field II Adaptive Invulnerability Field II EM Ward Amplifier II |
Large Shield Extender II Adaptive Invulnerability Field II Adaptive Invulnerability Field II Pithum C-Type EM Ward Amplifier [2] | |
Freed up low slot | Damage Control II | Damage Control II | Damage Control II | |
Anti-Thermal Screen Reinforcer I | Anti-Thermal Screen Reinforcer I | Anti-Thermal Screen Reinforcer I | Anti-Thermal Screen Reinforcer II [2] | |
65,2%65,7%69,0%74,1% | 69,5%70,0%72,8%77,4% | 69,5%70,0%72,8%77,4% | 71,9%72,1%72,8%77,4% | |
67,7%68,2%73,5%77,9% | 71,7%72,2%76,8%80,7% | 71,7%72,2%76,8%80,7% | 73,9%74,2%76,8%80,7% |
- ^ This should only be used by people who know what they are doing, but currently fly a T1 hull (eg do not have an advanced hull yet). The reasoning for this fit is that in a good fleet with excellent damage projection, with an experienced fleet commander and seasoned logistics, you can usually remove the damage control in favour of more damage mods. Note the EM hole in this fit - this substitution is ideally done with high (above-minimum) EM Compensation and/or a Deadspace resistance amplifier.
- ^ a b This is a necessary upgrade in order to improve overall resists for headquarter sites.
Resist bonused ships
Ships like the Rokh with resist bonuses can fit slightly different due to their higher base resistances.
This assumes our minimum skills so the various resist can be up to 3% higher with Caldari Battleship V instead of III and in the case of the headquarter fit with the EM amplifier, additional EM resist can be gained by training EM Shield Compensation V.
Slots | Vanguard (less tank) [1] | Vanguard | Assault | Headquarter |
---|---|---|---|---|
Adaptive Invulnerability Field II Adaptive Invulnerability Field II Freed up mid slot |
Adaptive Invulnerability Field II Adaptive Invulnerability Field II Freed up mid slot |
Adaptive Invulnerability Field II Adaptive Invulnerability Field II Freed up mid slot |
Adaptive Invulnerability Field II Adaptive Invulnerability Field II EM Ward Amplifier II | |
Freed up low slot | Damage Control II | Damage Control II | Damage Control II | |
Anti-Thermal Screen Reinforcer I Anti-EM Screen Reinforcer I |
Anti-Thermal Screen Reinforcer I Anti-EM Screen Reinforcer I |
Anti-Thermal Screen Reinforcer I Anti-EM Screen Reinforcer I |
Anti-Thermal Screen Reinforcer I Anti-EM Screen Reinforcer I | |
62,3%69,8%72,7%77,2% | 67,0%73,6%76,1%80,1% | 67,0%73,6%76,1%80,1% | 75,4%73,6%76,1%80,1% | |
65,0%72,0%76,7%80,6% | 69,4%75,5%79,6%83,0% | 69,4%75,5%79,6%83,0% | 76,1%75,5%79,6%83,0% |
- ^ In a good fleet with excellent damage projection, with an experienced fleet commander and seasoned logistics, you can usually remove the damage control in favour of more damage mods.
Ships like the Apocalypse Navy Issue and the Megathron Navy Issue with only four midslots aren't recommended for incursions, mostly due to their lack of midslots but also due to being armour based and suffering from fairly low shield hit points (and in the case of the apocalypse serious capacitor issues) which just compounds the issues of these ships. Within certain limits they can still do reasonably well in vanguards and assaults, but they are unable to do headquarter sites both from an efficiency point of view as well as due to their weak tank.
Navy and Fleet Issue ships have higher rig calibration points than other ships (400 points instead of the regular 350 points).
Slots | Vanguard (less tank) [1] | Vanguard | Assault (less tank) [2] |
---|---|---|---|
Adaptive Invulnerability Field II Adaptive Invulnerability Field II Freed up mid slot |
Adaptive Invulnerability Field II Adaptive Invulnerability Field II Freed up mid slot |
Adaptive Invulnerability Field II Adaptive Invulnerability Field II Large Shield Extender II [3] | |
Freed up low slot | Damage Control II | Damage Control II | |
Anti-Thermal Screen Reinforcer I Anti-EM Screen Reinforcer II |
Anti-Thermal Screen Reinforcer I Anti-EM Screen Reinforcer II |
Anti-Thermal Screen Reinforcer I Anti-EM Screen Reinforcer II | |
60,2%65,7%69,0%74,1% | 65,2%70,0%72,8%77,4% | 65,2%70,0%72,8%77,4% | |
63,1%68,2%73,5%77,9% | 67,7%72,2%76,8%80,7% | 67,7%72,2%76,8%80,7% |
- ^ In a good fleet with excellent damage projection, with an experienced fleet commander and seasoned logistics, you can usually remove the damage control in favour of more damage mods.
- ^ This setup is considerably weaker than your average assault setup, even with the extra shield extender. Its considerably weaker resists means repairs are less effective.
- ^ The Large Shield Extender II module is often needed in assaults for armour tanked ships to compensate for lower innate shield hit points.
Advanced fits
While there are several ways to fit high-end ships for incursions, here are some frequently used variants. These largely revolve around swapping in the rigs, as mentioned in the §Rigging choice section above.
Calibration
Due to the limit of calibration points, there are several combinations available. Here are some common ones.
Slots | Offensive | Defensive | Warp speed |
---|---|---|---|
Anti-EM Screen Reinforcer I Large Hybrid Burst Aerator II [1] |
Anti-Thermal Screen Reinforcer II Spare rig slot Spare rig slot |
Anti-EM Screen Reinforcer II Large Hyperspatial Velocity Optimizer II Spare rig slot | |
SUM | 350/350 (0 points left) | 75/350 (275 points left) | 150/350 (200 points left) |
- ^ This should of course be a Energy Burst Aerator II for laser weapons and a Projectile Burst Aerator II for projectile weapons.
Filling up the spare rig slots is a matter of figuring out what rig benefits you the most, based on the type of fleet compositions you run, what kind of ship you fly and if a rig can in some way help you free up a low- or midslot. If you need more range use a Locus Coordinator II rig (150 points), if you need more shield hit points use a Core Defense Field Extender II rig (75 points) and if you need more cap use either a Capacitor Control Circuit II rig (150 points) or a Discharge Elutriation II rig (150 points).
Just remember that any offensive rig you fit on your ship needs to be tech two, otherwise it'll end up at the end of stacking penalties and that will render it completely useless.
Thermal rig
The thermal rig setup is primarily a more defensive setup, used for even resists with the ability to really push the resists up. The downside of this setup is that you're forced to use two midslots and cannot drop down to one midslot for vanguards. Depending on what other rigs you use, you'll have enough calibration points to upgrade to a tech two anti-thermal rig further increasing your tank.
This assumes our minimum skills so the EM resist can be up to 2% higher with EM Shield Compensation V instead of III.
Slots | Vanguard | Assault | Headquarter | Headquarter (alternative) [1] |
---|---|---|---|---|
Freed up mid slot Pithum C-Type Adaptive Invuln ... Pithum C-Type EM Ward Amplifier |
Freed up mid slot Pithum C-Type Adaptive Invuln ... Pithum C-Type EM Ward Amplifier |
Adaptive Invulnerability Field II Pithum C-Type Adaptive Invuln ... Pithum C-Type EM Ward Amplifier |
Freed up mid slot Pithum A-Type Adaptive Invuln ... [2] Pithum A-Type EM Ward Amplifier [2] | |
Freed up low slot | Damage Control II | Damage Control II | Damage Control II | |
Anti-Thermal Screen Reinforcer I | Anti-Thermal Screen Reinforcer I | Anti-Thermal Screen Reinforcer I | Anti-Thermal Screen Reinforcer I | |
66,0%66,9%64,4%70,3% | 70,3%69,3%68,8%74,0% | 75,4%74,5%77,0%80,8% | 75,0%72,5%72,1%76,8% | |
71,0%71,8%72,4%77,0% | 74,7%73,8%75,8%79,9% | 77,2%76,4%80,4%83,6% | 78,7%76,6%78,4%82,0% |
- ^ This alternative is only suitable for ships with a high native shield hit point count like the Nightmare, since it can't really push resists higher without using additional slots (at which point the other option is cheaper and more flexible). This setup also loses the ability to stagger two invulns in order to keep at least one of them up at all times even when neuted out. With just one invuln it is more susceptible to neuts.
- ^ a b This is a necessary upgrade in order to get enough resists with just one invulnerability field for headquarter sites.
Electromagnetic rig
The EM rig setup is primarily used to free up as many slots are possible, but requires you to spend considerably more ISK on deadspace hardeners and will still have considerably lower resists for vanguards.
Slots | Vanguard (much less tank) [1] | Vanguard [2] | Assault | Headquarter |
---|---|---|---|---|
Freed up mid slot Freed up mid slot Pithum B-Type Adaptive Invuln ... |
Freed up mid slot Freed up mid slot Pithum B-Type Adaptive Invuln ... |
Freed up mid slot Adaptive Invulnerability Field II Pithum B-Type Adaptive Invuln ... |
Freed up mid slot Pithum B-Type Adaptive Invuln ... [3] Pithum B-Type Adaptive Invuln ... | |
Freed up low slot | Damage Control II | Damage Control II | Damage Control II | |
Anti-EM Screen Reinforcer I | Anti-EM Screen Reinforcer I | Anti-EM Screen Reinforcer I | Anti-EM Screen Reinforcer I | |
58,4%55,0%66,3%71,9% | 63,6%60,6%70,5%75,4% | 69,8%70,9%78,2%81,8% | 74,7%75,6%81,7%84,7% | |
64,6%65,1%73,8%78,2% | 69,0%69,5%77,1%80,9% | 72,1%75,2%81,4%84,5% | 76,6%79,2%84,4%87,0% |
- ^ In a really good fleet with excellent damage projection, with an experienced fleet commander and seasoned logistics, you can usually remove the damage control in favour of more damage mods.
- ^ This setup is considerably weaker than your average vanguard setup and relies heavily on higher applied damage to mitigate incoming damage by killing them before they get into optimal range.
- ^ This is a necessary upgrade in order to get your EM and thermal resists up to an acceptable level for headquarter sites, especially if you run with less than recommended shield hit points.
Strategic cruisers and command ships
While a lot of communities avoid strategic cruisers and command ships due to the fact that their damage output cannot match that of pirate faction battleships, we still allow them as they can easily match the efficiency of tech one battleships. As such, we welcome properly fit strategic cruisers and command ships in our community, as they are good enough for our purposes and we don't benefit from alienating people who prefer to fly smaller ships.
Just be sure to inform people that if they have plans to fly with public communities, they will most likely need to train into a proper battleship.
Different resist profiles
One of the biggest differences fitting strategic cruisers and command ships compared to battleships is that they have a different resist profile. They are also much smaller in signature, especially the strategic cruisers, so won't need the same raw buffer of shield hit points either. As such, the solution could range from anything between a thermal and EM hardener for the Legion to a mere anti-EM rig on the Tengu or an invulnerability field for the Sleipnir.
Ship | Base resist profile | Comments |
---|---|---|
Astarte / Proteus | 0%60%85%50% | An EM hole. |
Legion | 0%20%70%87,5% | An EM hole and weak thermal resists. |
Loki [1] | 80%60%52%60% | No resist holes. |
Sleipnir | 75%60%40%50% | No resist holes. |
Tengu [1] | 20%84%76%60% | Weak EM resists. |
Vulture | 0%80%70%50% | An EM hole. |