Imperial Navy Slicer
RELATED UNI-WIKI REFERENCES
|
Development SHIP BONUSES
Amarr Frigate bonuses (per skill level):
Ship Attributes
|
Summary
The Imperial Navy Slicer is a ship with a distinctive role - that of a fast frigate sized kiter/sniper. Its impressive optimal range bonus allows it to snipe at long range with beam lasers, or to kite very effectively with pulse lasers loaded with scorch. It only has 2 turret slots, but its ship bonus can give them the damage of more than 4, while only needing the fitting and cap for two. Finally, the ship has a fast base speed and low mass, making it very quick and agile.
Skills
- Amarr Frigate to at least IV to take advantage of the Slicer's 10% bonus to Small Energy Turret optimal range and 25% bonus to Small Energy Turret damage that comes with every extra level in the skill.
- With the massive bonus to small energy turret damage and only 2 slots it is highly recommended to have T2 Small Energy Turret with supporting Gunnery skills to maximize the benefit.
Prequisite Skills:
- Propulsion Jamming Level 2 is necessary for Tech 2 points, and level 4 allows T2 webs.
- High Speed Maneuvering Level 3 for T2 MWDs. Level 4 is recommended.
- Hull Upgrades Level 2 is required for T2 Nanofiber Internal Structures and Overdrive Injectors and also increases your armor HP.
Helpful Skills:
- Hull Upgrades, CPU Management and Power Grid Management should be at level 5 (they are important for any ship you fly).
- Navigation 5% bonus to sub-warp speed per level. Level 5 is recommended.
- Acceleration Control 5% bonus to afterburner and MWD speed per level. Level 4 is recommended.
- Evasive Maneuvering 4% to ship agility per level. Level 5 is recommended.
- Signature Analysis 5% scan resolution per level; getting this to level 5 will greatly boost your target locking speed.
Fitting
Small Focused Pulse Laser II
Small Focused Pulse Laser II
Limited 1MN Microwarpdrive I
Warp Disruptor II
Heat Sink II
Tracking Enhancer II
Nanofiber Internal Structure II
Nanofiber Internal Structure II
Overdrive Injector System II
Small Energy Collision Accelerator I
Small Energy Locus Coordinator I
Small Low Friction Nozzle Joints I
Scorch S x2
Imperial Navy Multifrequency S x2
- Amarr Frigate V
- Small Energy Turret V
- Small Pulse Laser Specialization IV
- Fairly standard kiting slicer, use Scorch 99% of the time for PvP
- With Limited 1MN MWD you can fit a small repper instead of the overdrive injector
- If you are comfortable with it you can use a Gistii B-Type MWD. It isn't too expensive and the extra cap helps ALOT, this means that you might not be able to fit a repper
- As fitted, with all skills at V and before boost, the Slicer has 2.7 K EHP, flies at 4060 m/s (5800 m/s overheated), will run out of cap in 1 min 43 and align in 3.1 s with MWD on
- Damage is 149 dps at 20+3 km with Scorch
Small Focused Pulse Laser II
Small Focused Pulse Laser II
Gistii B-Type 1MN Microwarpdrive
Warp Disruptor II
Heat Sink II
Heat Sink II
Tracking Enhancer II
Co-Processor II
Nanofiber Internal Structure II
Small Energy Collision Accelerator I
Small Processor Overclocking Unit I
Imperial Navy Multifrequency S x2
Scorch S x2
- Amarr Frigate V
- Small Energy Turret V
- Small Pulse Laser Specialization IV
- This slicer is a bit slow, but does more dps.
- This fit can engage less things unless you have great nav skills, and some implants to back it up. It is recommended to have Skirmish links when using this fit because of its (relatively) low speed.
- The fitting is tight on CPU, possibly requiring replacing a heat sink with another co-processor if fitting skills are insufficient.
- As fitted, with all skills at V and before boost, the Slicer has 2.9 K EHP, flies at 3460 m/s (5000 m/s overheated), will run out of cap in 2 min 43 and align in 3.9 s with MWD on
- Damage is 174 dps at 19+3 km with Scorch
Small Focused Pulse Laser II
Small Focused Pulse Laser II
Limited 1MN Microwarpdrive I
Faint Warp Disruptor I
Heat Sink II
Heat Sink II
Damage Control II
Fourier Transform Tracking Program
Nanofiber Internal Structure II
Small Processor Overclocking Unit I
Small Processor Overclocking Unit I
Small Polycarbon Engine Housing I
Scorch S x2
Imperial Navy Gamma S x2
- A cheaper version of the High Skill fit above
- Very good fitting skills are required to fit as is. With all skills at V you'll have only 1.2 CPU left over. The lack of CPU prevents the use of many Tech II mods, so the Meta 4 versions are used.
- As fitted, with all skills at V and before boost, the Slicer has 4.1 K EHP, flies at 3630 m/s (5200 m/s overheated), will run out of cap in 1 min 49 and align in 3.6 s with MWD on
- Damage is 164 dps at 18+2.9 km with Scorch and 189 dps at 7.6 + 2.9 with Imperial Navy Gamma
Small Focused Pulse Laser II
Small 'Knave' Energy Drain
Small Focused Pulse Laser II
1MN Afterburner II
Faint Warp Disruptor I
Pseudoelectron Containment Field I
200mm Reinforced Rolled Tungsten Plates I
Small Ancillary Armor Repairer
Adaptive Nano Plating II
Heat Sink II
Small Energy Burst Aerator I
Small Energy Metastasis Adjuster I
Small Energy Locus Coordinator I
Nanite Repair Paste x1
Imperial Navy Multifrequency S x1
- From Jester's Trek blog http://jestertrek.blogspot.co.uk/2013/10/fit-of-week-slicer.html which contains tactics
Tactics
No sub-article about Imperial Navy Slicer roles or piloting tactics. You can write them here.
Notes
You can write additional notes for Imperial Navy Slicer here.